The URL can be used to link to this page

Home My WebLink AboutDDW-2025-005903 June 26th, 2025 Jake Dutton Kanab City 26 N 100 E Kanab, Utah 84741 Dear Jake Dutton: Subject: Public Drinking Water Requirements for Kanab City, UTAH13005 According to the Division of Drinking Water’s records, Kanab City is a Community water system that now serves a population of about 4,985 people. This population change identified in the most recent sanitary survey from 4,770 to 4,985 results in the following changes to your system’s sampling requirements as follows: Bacteriological Sampling The total number of bacteriological samples this system is now required to take has increased from 5 to 6 each month. It is still your responsibility to send a copy of all results to our office by the 10th of the following month. In the event of a coliform positive result, you are required to take three repeat samples and a triggered source E.coli sample for each ground water source in service at the time of the original positive sample. The system is required to submit an updated written sample site plan that identifies sampling sites and sample collection schedules that are representative of water throughout the distribution system. For any questions regarding the Total Coliform rule or Groundwater rule, contact Sitara Federico at (385) 515-1459 or sfederico@utah.gov. This new sample schedule will take effect on August 1st, 2025. 195 North 1950 West • Salt Lake City, UT Mailing Address: P.O. Box 144830 • Salt Lake City, UT 84114-4830 Telephone (801) 536-4200 • Fax (801) 536-4211 • T.D.D. (801) 536-4284 www.deq.utah.gov Jake Dutton Page 2 of 2 A current monitoring schedule for your system has been enclosed. If you would like to access this schedule online, it can be found at waterlink.utah.gov. If this letter is in error please contact me at (801) 641-6457 or mberger@utah.gov within 30 days. Thank you for your efforts in maintaining a safe drinking water system. Sincerely, Mark Berger Monitoring and Standards Section Manager Enclosure: Monitoring Schedule Revised Total Coliform Rule (RTCR) Sample Site Plan cc: Jake Dutton, jdutton@kanab.utah.gov Jeremy Robert, Southwest Utah Public Health Department Paul Wright, P.E Sitara Federico Page 2 of 2 Contacts Type: Administrative Contact Name: JAKE AUSTIN DUTTON Office: 435-644-2534 Emergency: 435-644-2588 Email: jdutton@kanab.utah.gov jkdutton03@gmail.com Site Information Legal Contact: KANAB Address: 26 N 100 E , KANAB, UT 84741 Phone: 435-644-2534 County: KANE COUNTY System Type: Community Certification Required: D2 Total Population: 4985 Local Health District: Southwest Utah Public Health Department Site Updates Last Inventory Update: 06/12/2025 Last Surveyor Update: 06/04/2025 Surveyor: LUKE TREUTEL Operating Period: 1/1 - 12/31 Last IPS Update: 06/26/2025 01:10:00 Political Districts Legislative District Map Water Usage Information per ERC Standard as of: 06/28/2022 Peak Day Demand per ERC (gal/day/ERC): 828.0 Average Annual Demand per ERC (gal/ERC): 171517.0 Equalization Storage per ERC (gal/ERC): 469.0 Total Ips Points: 15 Public Water System Water Monitoring ReportDEQ | Drinking Water Kanab City PWS ID: UTAH13005 Rating: Approved 03/10/1980 Status: Active BACTERIOLOGICAL MONITORING Sample Count Type Frequency Schedule Begin Schedule End Analyte Name 5 Routine Monthly 01/01/2013 COLIFORM (TCR) DISINFECTION BYPRODUCT STAGE 2 MONITORING Sample Count Type Frequency Sample Label 1 Routine Yearly UTAH13005 DS001 Sample ID below Sample ID Site Last Sampled Next Sample Due MR001 AIRPORT 08/22/2023 07/01/2025-09/30/2025 OTHER DISTRIBUTION MONITORING Analyte Name ID Sample Count Type Frequency Last Sampled Next Sample Due LEAD AND COPPER DS001 20 Routine 3 Years 09/2022 06/01/2025-09/30/2025 CHLORINE RESIDUAL MONITORING ID Facility Name Sample Count Type Frequency Last Sampled Next Sample Due DS001 UTAH13005 DISTRIBUTION SYSTEM 12 Routine Monthly -- Page 2 of 2 MONITORING REQUIREMENTS BY FACILITY ¹To fulfill the two pesticide sample requirements, systems are to submit the second pesticide sample in the quarter following the quarter in which the first sample was collected. ID Name Facility Details SS212 SAMPLING STATION - 01-05, 07-11, 18-22 Hide Details Name Sample Required Type Frequency Last Sample Next Sample Due INORGANICS & METALS 1 Routine 3 Years 08/30/2022 01/01/2023 - 12/31/2025 NITRATE 1 Routine Yearly 11/19/2024 01/01/2025 - 12/31/2025 PESTICIDES¹2 Routine 3 Years 08/22/2023 01/01/2026-12/31/2028 RADS - COMPLIANCE 1 Routine 6 Years 02/21/2018 01/01/2020 - 12/31/2025 SULFATE,SODIUM,TDS 1 Routine 3 Years 08/30/2022 01/01/2023 - 12/31/2025 VOLATILE ORGANICS 1 Routine 3 Years 08/30/2022 01/01/2023 - 12/31/2025 GROUPED SOURCE SAMPLING STATIONS Sample Group ID Sample Group Facility Details 8212.0 UTAH SAMPLING STATION SS212 View Details OPEN COMPLIANCE SCHEDULES Type Required Activities Severity Created Due Physical deficiency schedule WELL CASING VENT IS NOT DOWNTURNED SIG 11/21/2016 04/30/2020 Physical deficiency schedule SPRING BOX LID NOT SHOEBOX STYLE SIG 11/21/2016 04/30/2020 Water Use Data WUD STANDARD SET, RESET DUE IN 3 YEARS 07/11/2022 07/11/2025 Complete PFAS Initial Monitoring SUBMIT PFAS INITIAL MONITORING SAMPLES 04/26/2024 04/26/2027 CCR SCHEDULES Submit CCR Certification Letter 01/01/2025 10/01/2025 Utah Division of Drinking Water Bacteriological Sample Site Plan All public water systems are required under the Revised Total Coliform Rule (RTCR) to submit a Bacteriological Sample Site Plan. The purpose of the wrien sample site plan is to ensure the collecon of samples from points in the distribuon system that best represent the quality of water served to customers, to idenfy repeat sampling locaons, and to establish a sampling schedule. What to include in the plan: 1. The following should be submied for the Bacteriological Sample Site Plan: a. The plan must include a MAP of the distribuon system. Excepons are small systems such as restaurants, schools, office buildings, and some small industries. b. Bacteriological Sample Site Plan form. 2. The map should show locaons of all distribuon lines, sources, treatment, storage tanks and sampling sites. Idenfy each sampling site by street address and a numeric point code. Give a brief descripon of the site. For example: 201 Main Street, 1. DS001, outside house tap, or Maintenance Facility, 1. DS001, men’s restroom sink. The sampling site Numeric Point Code should begin with the number 1 and then connue in sequenal numeric order. Use the numeric point code, along with DS001, when subming samples to the laboratory. 3. Locate sample sites so they represent all areas of the distribuon system. You may wish to include comments on your plan showing the reason(s) for selecng each site. Such as populaon density, industrial areas, pressures zones, areas vulnerable to potenal contaminaon, dead-end lines, and purchased source entry points. Alternate sampling locaons through different locaons of the water system. 4. Do NOT indicate the raw water tap or sources as sampling sites for roune or repeat coliform samples. These are “triggered source” sampling locaons under the Groundwater Rule (GWR). Indicate the associated source (by DDW assigned source codes) for each sample locaon. For example: “WS001”, “WS002 and WS004”, or “All Sources” supply this specific locaon. 5. Include the locaon for “Repeat” sample sites. Repeat samples must be collected at the following locaons within 24 hours of a total coliform or E coli posive sample: - The tap where the original posive coliform sample was collected, - A tap within five (5) service connecons upstream, and - A tap within five (5) service connecons downstream. 6. Alternave fixed repeat locaons may be idenfied at locaons that best verify and determine the extent of potenal contaminaon in the distribuon system based on a specific situaon. 7. For system with only one or two service connecons (suitable sampling taps), collect all three repeat samples in one day from the limited number of sampling taps. The sample site plan should show which taps(s) are in use for mulple samples. 8. The number of roune coliform samples collected each month is based on the populaon of the water system. For a table indicang the number of samples required see Secon R309-210-5. 9. Include a schedule for selecon of the samples. Systems using only groundwater and serving less than 4,900 people (five samples required per month or fewer) may collect all required sample on a single day. Systems with greater than five samples per month must collect a poron of the samples at regular intervals throughout the month with the total number being the number required. revised 2/3/2021 S UBMITTAL Mail the completed form to: Or Email: Division of Drinking water An: Sitara Federico 195 N 1950 W PO BOX 144830 Salt lake City, UT 84114 DDWREPORTS@UTAH.GOV This applicaon and related environmental informaon are available online: DrinkingWater.utah.gov revised 2/3/2021 Bacteriological Sample Site Plan B ASIC W ATER S YSTEM I NFO Water System Name: Water System #: S ITE S ELECTION I NFO Monthly Roune Sample Sites (mark an “X” in boxes below): Follow-up/Repeat Sample (range or specific address) DDW Assigned # for Associated Roune Sample Point Descripon (horse bib, sink faucet, etc.) Address Point ID JA N FE B MA R AP R MA Y JU N JU L AU G SE P OC T NO V DE C 1-DS00 1 Down Up 2-DS00 1 Down Up 3-DS00 1 Down Up 4-DS00 1 Down Up 5-DS00 1 Down Up 6-DS00 1 Down Up S OURCE INFO C ERTIFICATION Samples Collected by: Plan Submitted by: Date Submitted: revised 2/3/2021 Source(s) Name: DDW Source or Group # Bacteria Sampling Laboratory Information: Laboratory: Address: City: Zip Code: Phone Number: Contact Name: _______________________________________ ____ _______________________________________ ____ _______________________________________ ____ _______________________________________ ____ _______________________________________ ____ _______________________________________ ____ _______________________________________ ____