DDW-2025-005343

Keri Moya <[e-mail]>
UTAH14068 - Liqua Dry
3 messages
Keri Moya <[e-mail]>Wed, Jun 11, 2025 at 12:46 PM
To: John Chartier <[e-mail]>
Cc: Tom McOmie <[e-mail]>, Ryan Dearing <[e-mail]>
John,
Tom did the SS for this system last week. When the information for ST001 and ST002 pulls from
Waterlink, it comes across as 0 gallons.
I pulled the system in SDWIS and it shows it as 2200 NMVL . I was told that NMVL won't pull into
Waterlink, that it needs to be EFVT. Since you did the OP report, I just wanted to make sure you were
okay with me adding an EFVT number? The operator told Tom was a 3000-gallon tank, but I am assuming
he is incorrect, and it is the 2200 that you had listed.
If you will just let me know your thoughts, I would appreciate it.
Many thanks,
--
Keri Moya
Environmental Program Coordinator
Division of Drinking Water
195 N. 1950 W. Salt Lake City, UT 84116
Phone: [phone]
Fax: [phone]
drinkingwater.utah.gov
Emails to and from this email address may be considered public records and thus subject to Utah GRAMA requirements.
John Chartier <[e-mail]>Wed, Jun 11, 2025 at 2:32 PM
To: Keri Moya <[e-mail]>
Cc: Tom McOmie <[e-mail]>, Ryan Dearing <[e-mail]>
Hi Keri,
Yes, the tanks are 2200 gallons each, there should be two, correct? I double checked the as-built
drawings and they show 2,200 gallons. Please update SDWIS to the EFVT indicator.
Thanks!
Screenshot from as-built dwg:

John L. Chartier, P.E.
Central District Engineer| DEQ
M: [phone]
P: [phone] ext. 314
70 Westview Drive Richfield, UT 84701
deq.utah.gov
Emails to and from this email address may be considered public records and thus subject to Utah GRAMA
requirements.
[Quoted text hidden]
Keri Moya <[e-mail]>Wed, Jun 11, 2025 at 2:46 PM
To: John Chartier <[e-mail]>
Cc: Tom McOmie <[e-mail]>, Ryan Dearing <[e-mail]>
Thanks, John! I will get them changed.
[Quoted text hidden]