DDW-2025-004834

Made in USA
HARMSCO®
Premium Hurricane® Polyester Cartridges
Designed for Hurricane® and WaterBetter® Filter Housings
High Flow Performance
Lower Operation Cost with Hurricane® Cartridges
HARMSCO® Filtration Products
High flow capability
Lower overall operating cost
Reduced waste disposal
Longer filter runs for fewer change-outs
Increased contaminant removal
Operator friendly
Fewer cartridges for fewer change-outs
and lower maintenance cost
Pleated Polyester-Plus™ filter media provides higher
flow rates and lower initial pressure drop
Pleated surface area provides higher loading capacity
for longer filter life and increased particle removal
End cap, center tube and media are thermally bonded
as one integral component for added strength
Offered in three sizes (40, 90 and 170) and eight micron
ratings (0.35, 1, 5, 10, 20, 50, 100 and 150) to meet all
your high flow requirements
Features
Maximum Surface Area
Cooling Tower Filtration
Chill Water Loop Filtration
Food & Beverage Filtration
Marine / Aquatic Filtration
Industrial Coolant Filtration
Commercial/Residential Drinking Water Filtration
Municipal Drinking Water Filtration
Reverse Osmosis Pre-filtration
Desalination Pre-filtration
Industrial Water Filtration
Applications
Premium Hurricane®
Polyester Cartridges
HCP
Micron Ratings: Nominal micron ratings of 0.35,
1, 5, 10, 20, 50, 100, 150
End Caps: Pliable PVC with sealing surface built-in
Filter Media: nominal pleated Polyester-Plus™
Temperature: 140˚F (60˚C) temperature limit*
Center Tubes: ABS or PVC
Specifications
* Temperature limits vary and depend on pressure and time under load.
For Harmsco® Hurricane® and WaterBetter® Single-cartridge Filter Housings
*Harmsco® recommends operation at 70% of maximum flow rate for optimum performance.
Cleanable / Reusable in most filtration applications
and micron ratings.
9-5/8”
7-3/4” O.D.
19-1/2”
30-3/4”
40
90
170
Premium Hurricane®
Polyester Cartridges
Length and O.D.
Cartridge Selection/Sizing Guide
Product Code NominalMicron
Rating
Media(sq ft)RecommendedFlow Rate*
(GPM)
Max Flow Rate*
(GPM)
Max Flow Rate*
(LPM)
Max Flow Rate*
(M3/HR)
No./Carton CartonSize
Premium Hurricane® Polyester Cartridges - rated up to 140˚F (60˚C).
HC/40-0.35 0.35 40 35 50 189 12 1 9x9x11
HC/40-1 1 40 35 50 189 12 1 9x9x11
HC/40-5 5 40 35 50 189 12 1 9x9x11
HC/40-10 10 40 35 50 189 12 1 9x9x11
HC/40-20 20 40 35 50 189 12 1 9x9x11
HC/40-50 50 40 35 50 189 12 1 9x9x11
HC/40-100 100 40 35 50 189 12 1 9x9x11
HC/40-150 150 40 35 50 189 12 1 9x9x11
HC/90-0.35 0.35 90 70 100 378 24 1 9x9x21
HC/90-1 1 90 70 100 378 24 1 9x9x21
HC/90-5 5 90 70 100 378 24 1 9x9x21
HC/90-10 10 90 70 100 378 24 1 9x9x21
HC/90-20 20 90 70 100 378 24 1 9x9x21
HC/90-50 50 90 70 100 378 24 1 9x9x21
HC/90-100 100 90 70 100 378 24 1 9x9x21
HC/90-150 150 90 70 100 378 24 1 9x9x21
HC/170-0.35 0.35 170 105 150 568 36 1 9x9x32
HC/170-1 1 170 105 150 568 36 1 9x9x32
HC/170-5 5 170 105 150 568 36 1 9x9x32
HC/170-10 10 170 105 150 568 36 1 9x9x32
HC/170-20 20 170 105 150 568 36 1 9x9x32
HC/170-50 50 170 105 150 568 36 1 9x9x32
HC/170-100 100 170 105 150 568 36 1 9x9x32
HC/170-150 150 170 105 150 568 36 1 9x9x32
7-3/4” O.D.
9-5/8”
19-1/2”
30-3/4”
Pressure drop
shown at right
is for filter housing
and 20 micron filter cartridge
in clean water.
Pressure Drop
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
10
9
8
7
6
5
4
3
2
1
To
t
a
l

H
e
a
d

L
o
s
s

(
p
s
i
)
Flow Rate (GPM)
HUR 40 HP
HUR 90 HP
HUR 170 HP
Premium Hurricane® Polyester Cartridges
HARMSCO® Filtration Products
P.O. Box 14066, North Palm Beach, FL 33408
[phone] • Toll-free: [phone] • Fax: [phone] • E-mail: [e-mail] © Harmsco, Inc. 27B 08 3/13
www.harmsco.com
Made in USA
Note: This publication is to be used as a guide. The data within has been obtained from many sources and is considered to be accurate. Harmsco does not assume liability for the accuracy and/or completeness of this data. Changes to the data can be made without notification. Temperature, Pressure, Flow Rates, Differential Pressures, Chemical Combinations and other unknown factors can affect performance in unknown ways. Limited Warranty: Harmsco warrants their products to be free of material and workmanship defects. Determination of suitability of Harmsco products for uses and applications contemplated by Buyer shall be the sole responsibility of Buyer. The end user/installer/buyer shall be liable for the product’s performance and suitability regarding their specific intended applications. End users should perform their own tests to determine suitability for each application.
Ca
r
t
r
i
d
g
e

Le
n
g
t
h