DAQ-2024-011744

DAQE-AN158320003-24

{{$d1 }}

John Rogers
PPC Flexible Packaging
213 Temkin Way
Payson, UT 84651
[e-mail]

Dear Mr. Rogers:

Re: Approval Order: Modification to Approval Order DAQE-AN158320001-18 to Add Equipment
Project Number: N158320003

The attached Approval Order (AO) is issued pursuant to the Notice of Intent (NOI) received on April 30,
2021. PPC Flexible Packaging must comply with the requirements of this AO, all applicable state
requirements (R307), and Federal Standards.

The project engineer for this action is Stockton Antczak, who can be contacted at [phone] or
[e-mail]. Future correspondence on this AO should include the engineer's name as well as the
DAQE number shown on the upper right-hand corner of this letter. No public comments were received on
this action.

Sincerely,

{{$s }}

Bryce C. Bird
Director

BCB:SA:jg

cc: Davis County Health Department

195 North 1950 West • Salt Lake City, UT
Mailing Address: P.O. Box 144820 • Salt Lake City, UT 84114-4820
Telephone [phone] • Fax [phone] • T.D.D. [phone]
www.deq.utah.gov
Printed on 100% recycled paper
State of Utah

SPENCER J. COX
Governor
DEIDRE HENDERSON
Lieutenant Governor

Department of
Environmental Quality

Kimberly D. Shelley
Executive Director

DIVISION OF AIR QUALITY
Bryce C. Bird
Director

November 21, 2024

STATE OF UTAH
Department of Environmental Quality
Division of Air Quality

{{#s=Sig_es_:signer1:signature}}
{{#d1=date1_es_:signer1:date:format(date, "mmmm d, yyyy")}}
{{#d2=date1_es_:signer1:date:format(date, "mmmm d, yyyy"):align(center)}}

APPROVAL ORDER
DAQE-AN158320003-24
Modification to Approval Order DAQE-AN158320001-18
to Add Equipment

Prepared By
Stockton Antczak, Engineer
[phone]
[e-mail]

Issued to
PPC Flexible Packaging - Flexographic Printing Facility

Issued On
{{$d2 }}

Issued By

{{$s }}

Bryce C. Bird
Director
Division of Air Quality

November 21, 2024
TABLE OF CONTENTS

TITLE/SIGNATURE PAGE ....................................................................................................... 1
GENERAL INFORMATION ...................................................................................................... 3
CONTACT/LOCATION INFORMATION ............................................................................... 3
SOURCE INFORMATION ........................................................................................................ 3
General Description ................................................................................................................ 3
NSR Classification .................................................................................................................. 3
Source Classification .............................................................................................................. 3
Applicable Federal Standards ................................................................................................. 3
Project Description.................................................................................................................. 4
SUMMARY OF EMISSIONS .................................................................................................... 4
SECTION I: GENERAL PROVISIONS .................................................................................... 4
SECTION II: PERMITTED EQUIPMENT .............................................................................. 5
SECTION II: SPECIAL PROVISIONS ..................................................................................... 6
PERMIT HISTORY ..................................................................................................................... 8
ACRONYMS ................................................................................................................................. 9

DAQE-AN158320003-24
Page 3

GENERAL INFORMATION

CONTACT/LOCATION INFORMATION

Owner Name Source Name
PPC Flexible Packaging PPC Flexible Packaging - Flexographic Printing Facility

Mailing Address Physical Address
213 Temkin Way 95 South River Bend Way
Payson, UT 84651 North Salt Lake, UT 84054

Source Contact UTM Coordinates
Name: John Rogers 420,424 m Easting
Phone: [phone],521,401 m Northing
Email: [e-mail] Datum NAD83
UTM Zone 12
SIC code 2752 (Commercial Printing, Lithographic)

SOURCE INFORMATION
General Description
PPC Flexible Packaging (PPC) operates a flexographic printing plant located in North Salt Lake. The
equipment on site consists of various presses, laminators, and finishing and packaging machines. The
VOC emissions from all the operations at the plant will be controlled by a regenerative thermal oxidizer
(RTO) that uses supplemental natural gas to maintain the operating temperature. The VOC emissions
from the ink and solvent storage areas, ink mixing areas, printer de-inking areas, the Uteco 8 color press
device, and three (3) floor sweeps are controlled by the RTO as well.

NSR Classification
Minor Modification at Minor Source

Source Classification
Located in Northern Wasatch Front O3 NAA, Salt Lake City UT PM2.5 NAA
Davis County
Airs Source Size: B

Applicable Federal Standards
None

DAQE-AN158320003-24
Page 4

Project Description
PPC has requested to add one (1) color printer and one (1) printer/laminator. Facility-wide PTE were
re-evaluated as part of this modification based on updated equipment lists and operations. The following
updates were made to the AO:

1) Added one (1) Color Printer to equipment list and PTE.
2) Added one (1) Printer/Laminator to equipment list and PTE.
3) Updated site-wide PTE.

SUMMARY OF EMISSIONS

The emissions listed below are an estimate of the total potential emissions from the source. Some
rounding of emissions is possible.

Criteria Pollutant Change (TPY) Total (TPY)
CO2 Equivalent 0 1958.00
Carbon Monoxide 0 1.37
Nitrogen Oxides 0 1.63
Particulate Matter - PM10 0 0.10
Particulate Matter - PM2.5 0 0.10
Sulfur Dioxide 0 0.01
Volatile Organic Compounds 9.67 19.35

Hazardous Air Pollutant Change (lbs/yr) Total (lbs/yr)
Formaldehyde (CAS #50000) 2
Glycol Ethers (CAS #EDF109) 28
Hexane (CAS #110543) 0 59
Methanol (CAS #67561) 18
Naphthalene (CAS #91203) 0 7
Change (TPY) Total (TPY)
Total HAPs 0.03 0.06

SECTION I: GENERAL PROVISIONS

I.1 All definitions, terms, abbreviations, and references used in this AO conform to those used in
the UAC R307 and 40 CFR. Unless noted otherwise, references cited in these AO conditions refer to those rules. [R307-101]

I.2 The limits set forth in this AO shall not be exceeded without prior approval. [R307-401]
I.3 Modifications to the equipment or processes approved by this AO that could affect the
emissions covered by this AO must be reviewed and approved. [R307-401-1]

DAQE-AN158320003-24
Page 5

I.4 All records referenced in this AO or in other applicable rules, which are required to be kept by the owner/operator, shall be made available to the Director or Director's representative upon request, and the records shall include the two-year period prior to the date of the request. Unless otherwise specified in this AO or in other applicable state and federal rules, records shall be kept for a minimum of two (2) years. [R307-401-8] I.5 At all times, including periods of startup, shutdown, and malfunction, owners and operators shall, to the extent practicable, maintain and operate any equipment approved under this AO,
including associated air pollution control equipment, in a manner consistent with good air pollution control practice for minimizing emissions. Determination of whether acceptable operating and maintenance procedures are being used will be based on information available to
the Director which may include, but is not limited to, monitoring results, opacity observations, review of operating and maintenance procedures, and inspection of the source. All maintenance performed on equipment authorized by this AO shall be recorded. [R307-401-4]

I.6 The owner/operator shall comply with UAC R307-107. General Requirements: Breakdowns. [R307-107]
I.7 The owner/operator shall comply with UAC R307-150 Series. Emission Inventories. [R307-150]

I.8 The owner/operator shall submit documentation of the status of construction or modification to the Director within 18 months from the date of this AO. This AO may become invalid if construction is not commenced within 18 months from the date of this AO or if construction is discontinued for 18 months or more. To ensure proper credit when notifying the Director, send the documentation to the Director, attn.: NSR Section. [R307-401-18]

SECTION II: PERMITTED EQUIPMENT
II.A THE APPROVED EQUIPMENT II.A.1 Target Labels and Packaging Flexographic Printing Plant
II.A.2 Floor Sweeps Three (3) Floor Sweeps The vents (floor sweeps) are placed in the floors to capture VOC emissions from the ink storage area, the roll changing (plating) area, and the Uteco press operations. Control: RTO II.A.3 Regenerative Thermal Oxidizer RTO Device Fuel: Natural Gas Capacity: 3 MMBtu/hr Processes Controlled: Three (3) floor sweeps, Uteco 8 Press, and Uteco 8XS Press
II.A.4 Ink and Roll Storage Areas Fugitive emissions from the ink storage, roll storage, and change-out areas that aren't captured in the floor sweeps.
DAQE-AN158320003-24
Page 6

II.A.5 Digital Presses One (1) Digital Press Attached equipment: electric dryer and corona treater One (1) Digital Press Attached equipment: electric dryer II.A.6 In-Line Flexo Presses
One (1) In-Line Press Attached equipment: electric dryer and corona treater
One (1) In-Line Press Attached equipment: electric dryer
II.A.7 Super Simplex Printer One (1) Super Simplex Printer Attached equipment: corona treater
II.A.8 Uteco 8 Color Press Attached equipment: Two (2) burners
Control: RTO
Airflow rate: 15,000 scfm
II.A.9 Uteco Mistral Printer/Laminator (NEW) Attached equipment: One (1) burner, corona treater II.A.10 Uteco 8XS Color Press (NEW)
Attached Equipment: Two (2) burners
Control: RTO
II.A.11 Finisher One (1) Finishing Device (used to finish the item to the proper size by cutting, folding, gluing, etc.)
II.A.12 Rewinders
Five (5) Rewinders
II.A.13 Seamer, Cutter, Pouch Machines, Bag Machine One (1) Seamer One (1) Cutter Two (2) Pouch Machines One (1) Bag Machine For information purposes only.

SECTION II: SPECIAL PROVISIONS II.B REQUIREMENTS AND LIMITATIONS
II.B.1 Site-wide Requirements II.B.1.a The owner/operator shall not allow visible emissions from any stationary point or fugitive emission source on site to exceed 10% opacity. [R307-401-8]
DAQE-AN158320003-24
Page 7

II.B.1.a.1 Opacity observations of emissions from stationary sources shall be conducted in accordance with 40 CFR 60, Appendix A, Method 9. [R307-401-8] II.B.2 VOC Requirements
II.B.2.a The VOC content of the inks used at this plant shall not exceed the density limits established by R307-351. Inks shall not be thinned or otherwise reduced beyond manufacturers recommendations. [R307-351] II.B.2.a.1 The density parameters shall be tested by using the appropriate ASTM method or another method
approved by the Director. [R307-401-8]
II.B.2.b The plant-wide emissions of VOCs from the printing presses and associated operations shall not exceed: 19.35 tons per rolling 12-month period for VOCs. [R307-401-8]
II.B.2.b.1 Compliance with each limitation shall be determined on a rolling 12-month total. Based on the
20th day of each month, a new 12-month total shall be calculated using data from the previous 12 months. [R307-401-8]

The VOC emissions shall be determined by maintaining a record of VOC-emitting materials used each month. The record shall include the following data for each material used: A. Name of the VOC-emitting material, such as ink, adhesive, solvent, thinner, reducers, chemical compounds, toxics, isocyanates, etc. B. Density of each material used (pounds per gallon) C. Percent by weight of all VOC in each material used D. Gallons of each VOC-emitting material used E. The amount of VOC emitted monthly by each material used shall be calculated by the following procedure: VOC = (% VOC by Weight/100) x [Density (lb/gal )] x Gal Consumed x (1 ton/2000 lb) F. The amount of VOC emitted monthly from all materials used. G. The amount of VOCs reclaimed for the month shall be similarly quantified and subtracted from the quantities calculated above to provide the monthly total VOC emissions. H. VOCs from the floor sweeps, the Uteco 8 press, and the Uteco 8XS are controlled by the RTO and shall be accounted for assuming 95% capture efficiency and 98% control efficiency. [R307-401-8]
II.B.2.c The owner/operator shall not use any chemicals with any HAPs in the printing presses and
associated operations in the plant. [R307-401-8]

II.B.2.c.1 The owner/operator shall use the most recent version of the Safety Data Sheets (SDS) to demonstrate compliance with the HAP requirement above. [R307-401-8]
DAQE-AN158320003-24
Page 8

II.B.3 RTO Requirements II.B.3.a The owner/operator shall route all emissions from the floor sweeps, Uteco 8 Press, and Uteco
8XS Press to the RTO before being vented to the atmosphere. [R307-401-8]
II.B.3.b At all times while operating, the owner/operator shall maintain a temperature at or above 1,500 degrees Fahrenheit in the RTO. [R307-401-8] II.B.3.c The owner/operator shall install, calibrate, maintain, and operate a device to monitor the operating temperature of the RTO. [R307-401-8]

II.B.3.c.1 The monitoring device shall be located such that an inspector/operator can safely read the output at any time. The operating temperature of the RTO shall be recorded on a daily basis when the RTO operates. [R307-401-8]
PERMIT HISTORY

This Approval Order shall supersede (if a modification) or will be based on the following documents: Supersedes AO DAQE-AN158320001-18 dated December 18, 2018 Is Derived From NOI dated April 30, 2021 Incorporates Additional information dated June 3, 2021 Incorporates Additional Information dated April 25, 2023 Incorporates Additional Information dated May 16, 2023 Incorporates Additional Information dated May 19, 2023

DAQE-AN158320003-24
Page 9

ACRONYMS

The following lists commonly used acronyms and associated translations as they apply to this document:

40 CFR Title 40 of the Code of Federal Regulations
AO Approval Order
BACT Best Available Control Technology
CAA Clean Air Act
CAAA Clean Air Act Amendments
CDS Classification Data System (used by Environmental Protection Agency to classify
sources by size/type)
CEM Continuous emissions monitor
CEMS Continuous emissions monitoring system
CFR Code of Federal Regulations
CMS Continuous monitoring system
CO Carbon monoxide
CO2 Carbon Dioxide
CO2e Carbon Dioxide Equivalent - Title 40 of the Code of Federal Regulations Part 98,
Subpart A, Table A-1
COM Continuous opacity monitor
DAQ/UDAQ Division of Air Quality
DAQE This is a document tracking code for internal Division of Air Quality use
EPA Environmental Protection Agency
FDCP Fugitive dust control plan
GHG Greenhouse Gas(es) - Title 40 of the Code of Federal Regulations 52.21 (b)(49)(i)
GWP Global Warming Potential - Title 40 of the Code of Federal Regulations Part 86.1818-
12(a)
HAP or HAPs Hazardous air pollutant(s)
ITA Intent to Approve
LB/YR Pounds per year MACT Maximum Achievable Control Technology MMBTU Million British Thermal Units NAA Nonattainment Area NAAQS National Ambient Air Quality Standards NESHAP National Emission Standards for Hazardous Air Pollutants NOI Notice of Intent
NOx Oxides of nitrogen
NSPS New Source Performance Standard
NSR New Source Review
PM10 Particulate matter less than 10 microns in size
PM2.5 Particulate matter less than 2.5 microns in size
PSD Prevention of Significant Deterioration
PTE Potential to Emit
R307 Rules Series 307
R307-401 Rules Series 307 - Section 401
SO2 Sulfur dioxide
Title IV Title IV of the Clean Air Act
Title V Title V of the Clean Air Act
TPY Tons per year
UAC Utah Administrative Code
VOC Volatile organic compounds

DAQE-IN158320003-24

October 16, 2024

John Rogers
PPC Flexible Packaging
213 Temkin Way
Payson, UT 84651
[e-mail]

Dear Mr. Rogers:

Re: Intent to Approve: Modification to Approval Order DAQE-AN158320001-18 to Add Equipment
Project Number: N158320003

The attached document is the Intent to Approve (ITA) for the above-referenced project. The ITA is
subject to public review. Any comments received shall be considered before an Approval Order (AO) is
issued. The Division of Air Quality is authorized to charge a fee for reimbursement of the actual costs
incurred in the issuance of an AO. An invoice will follow upon issuance of the final AO.

Future correspondence on this ITA should include the engineer's name, Stockton Antczak, as well as the
DAQE number as shown on the upper right-hand corner of this letter. Stockton Antczak, can be reached
at [phone] or [e-mail], if you have any questions.

Sincerely,

{{$s }}

Jon L. Black, Manager
New Source Review Section

JLB:SA:jg

cc: Davis County Health Department

195 North 1950 West • Salt Lake City, UT
Mailing Address: P.O. Box 144820 • Salt Lake City, UT 84114-4820
Telephone [phone] • Fax [phone] • T.D.D. [phone]
www.deq.utah.gov
Printed on 100% recycled paper
State of Utah

SPENCER J. COX
Governor
DEIDRE HENDERSON
Lieutenant Governor

Department of
Environmental Quality

Kimberly D. Shelley
Executive Director

DIVISION OF AIR QUALITY
Bryce C. Bird
Director

* ) ' & — / G v A ? A C A B w B ? ˜
STATE OF UTAH
Department of Environmental Quality
Division of Air Quality

INTENT TO APPROVE
DAQE-IN158320003-24
Modification to Approval Order DAQE-AN158320001-18
to Add Equipment

Prepared By
Stockton Antczak, Engineer
[phone]
[e-mail]

Issued to
PPC Flexible Packaging - Flexographic Printing Facility

Issued On
October 16, 2024

{{$s }}

New Source Review Section Manager
Jon L. Black
{{#s=Sig_es_:signer1:signature}}
* ) ' & — / G v A ? A C A B w B ? ˜

TABLE OF CONTENTS

TITLE/SIGNATURE PAGE ....................................................................................................... 1
GENERAL INFORMATION ...................................................................................................... 3
CONTACT/LOCATION INFORMATION ............................................................................... 3
SOURCE INFORMATION ........................................................................................................ 3
General Description ................................................................................................................ 3
NSR Classification .................................................................................................................. 3
Source Classification .............................................................................................................. 3
Applicable Federal Standards ................................................................................................. 3
Project Description.................................................................................................................. 4
SUMMARY OF EMISSIONS .................................................................................................... 4
PUBLIC NOTICE STATEMENT............................................................................................... 4
SECTION I: GENERAL PROVISIONS .................................................................................... 5
SECTION II: PERMITTED EQUIPMENT .............................................................................. 5
SECTION II: SPECIAL PROVISIONS ..................................................................................... 7
PERMIT HISTORY ..................................................................................................................... 9
ACRONYMS ............................................................................................................................... 10

DAQE-IN158320003-24
Page 3

GENERAL INFORMATION

CONTACT/LOCATION INFORMATION

Owner Name Source Name
PPC Flexible Packaging PPC Flexible Packaging - Flexographic Printing Facility

Mailing Address Physical Address
213 Temkin Way 95 South River Bend Way
Payson, UT 84651 North Salt Lake, UT 84054

Source Contact UTM Coordinates
Name: John Rogers 420,424 m Easting
Phone: [phone],521,401 m Northing
Email: [e-mail] Datum NAD83
UTM Zone 12
SIC code 2752 (Commercial Printing, Lithographic)

SOURCE INFORMATION
General Description
PPC Flexible Packaging (PPC) operates a flexographic printing plant located in North Salt Lake. The
equipment on site consists of various presses, laminators, and finishing and packaging machines. The
VOC emissions from all the operations at the plant will be controlled by a regenerative thermal oxidizer
(RTO) that uses supplemental natural gas to maintain the operating temperature. The VOC emissions
from the ink and solvent storage areas, ink mixing areas, printer de-inking areas, the Uteco 8 color press
device, and three (3) floor sweeps are controlled by the RTO as well.
NSR Classification
Minor Modification at Minor Source

Source Classification
Located in Northern Wasatch Front O3 NAA, Salt Lake City UT PM2.5 NAA
Davis County
Airs Source Size: B

Applicable Federal Standards
None

DAQE-IN158320003-24
Page 4

Project Description
PPC has requested to add one (1) color printer and one (1) printer/laminator. Facility-wide PTE were
re-evaluated as part of this modification based on updated equipment lists and operations. The following
updates were made to the AO:

1) Added one (1) Color Printer to equipment list and PTE.
2) Added one (1) Printer/Laminator to equipment list and PTE.
3) Updated site-wide PTE.

SUMMARY OF EMISSIONS

The emissions listed below are an estimate of the total potential emissions from the source. Some
rounding of emissions is possible.

Criteria Pollutant Change (TPY) Total (TPY)
CO2 Equivalent 0 1958.00
Carbon Monoxide 0 1.37
Nitrogen Oxides 0 1.63
Particulate Matter - PM10 0 0.10
Particulate Matter - PM2.5 0 0.10
Sulfur Dioxide 0 0.01
Volatile Organic Compounds 9.67 19.35

Hazardous Air Pollutant Change (lbs/yr) Total (lbs/yr)
Formaldehyde (CAS #50000) 2
Glycol Ethers (CAS #EDF109) 28
Hexane (CAS #110543) 0 59
Methanol (CAS #67561) 18
Naphthalene (CAS #91203) 0 7
Change (TPY) Total (TPY)
Total HAPs 0.03 0.06

PUBLIC NOTICE STATEMENT

The NOI for the above-referenced project has been evaluated and has been found to be consistent with the
requirements of UAC R307. Air pollution producing sources and/or their air control facilities may not be
constructed, installed, established, or modified prior to the issuance of an AO by the Director.

A 30-day public comment period will be held in accordance with UAC R307-401-7. A notification of the
intent to approve will be published in the Ogden Standard Examiner on October 18, 2024. During the
public comment period the proposal and the evaluation of its impact on air quality will be available for
the public to review and provide comment. If anyone so requests a public hearing within 15 days of
publication, it will be held in accordance with UAC R307-401-7. The hearing will be held as close as
practicable to the location of the source. Any comments received during the public comment period and
the hearing will be evaluated. The proposed conditions of the AO may be changed as a result of the
comments received.

DAQE-IN158320003-24
Page 5

SECTION I: GENERAL PROVISIONS

The intent is to issue an air quality AO authorizing the project with the following recommended
conditions and that failure to comply with any of the conditions may constitute a violation of the AO.

I.1 All definitions, terms, abbreviations, and references used in this AO conform to those used in the UAC R307 and 40 CFR. Unless noted otherwise, references cited in these AO conditions refer to those rules. [R307-101]
I.2 The limits set forth in this AO shall not be exceeded without prior approval. [R307-401]

I.3 Modifications to the equipment or processes approved by this AO that could affect the emissions covered by this AO must be reviewed and approved. [R307-401-1]
I.4 All records referenced in this AO or in other applicable rules, which are required to be kept by
the owner/operator, shall be made available to the Director or Director's representative upon request, and the records shall include the two-year period prior to the date of the request.
Unless otherwise specified in this AO or in other applicable state and federal rules, records
shall be kept for a minimum of two (2) years. [R307-401-8]
I.5 At all times, including periods of startup, shutdown, and malfunction, owners and operators shall, to the extent practicable, maintain and operate any equipment approved under this AO, including associated air pollution control equipment, in a manner consistent with good air pollution control practice for minimizing emissions. Determination of whether acceptable operating and maintenance procedures are being used will be based on information available to the Director which may include, but is not limited to, monitoring results, opacity observations, review of operating and maintenance procedures, and inspection of the source. All maintenance performed on equipment authorized by this AO shall be recorded. [R307-401-4]
I.6 The owner/operator shall comply with UAC R307-107. General Requirements: Breakdowns.
[R307-107]
I.7 The owner/operator shall comply with UAC R307-150 Series. Emission Inventories. [R307-150]
I.8 The owner/operator shall submit documentation of the status of construction or modification to the Director within 18 months from the date of this AO. This AO may become invalid if
construction is not commenced within 18 months from the date of this AO or if construction is
discontinued for 18 months or more. To ensure proper credit when notifying the Director, send the documentation to the Director, attn.: NSR Section. [R307-401-18]

SECTION II: PERMITTED EQUIPMENT

The intent is to issue an air quality AO authorizing the project with the following recommended
conditions and that failure to comply with any of the conditions may constitute a violation of the AO.
II.A THE APPROVED EQUIPMENT

II.A.1 Target Labels and Packaging Flexographic Printing Plant
DAQE-IN158320003-24
Page 6

II.A.2 Floor Sweeps Three (3) Floor Sweeps The vents (floor sweeps) are placed in the floors to capture VOC emissions from the ink storage area, the roll changing (plating) area, and the Uteco press operations. Control: RTO II.A.3 Regenerative Thermal Oxidizer (RTO) RTO Device
Fuel: Natural Gas Capacity: 3 MMBtu/hr Processes Controlled: Three (3) floor sweeps, Uteco 8 Press, and Uteco 8XS Press

II.A.4 Ink and Roll Storage Areas Fugitive emissions from the ink storage, roll storage, and change-out areas that aren't captured in the floor sweeps. II.A.5 Digital Presses
One (1) Digital Press
Attached equipment: electric dryer and corona treater
One (1) Digital Press
Attached equipment: electric dryer
II.A.6 In-Line Flexo Presses One (1) In-Line Press Attached equipment: electric dryer and corona treater One (1) In-Line Press Attached equipment: electric dryer
II.A.7 Super Simplex Printer
One (1) Super Simplex Printer Attached equipment: corona treater

II.A.8 Uteco 8 Color Press Attached equipment: Two (2) burners Control: RTO Air flow rate: 15,000 scfm II.A.9 Uteco Mistral Printer/Laminator (NEW)
Attached equipment: One (1) burner, corona treater

II.A.10 Uteco 8XS Color Press (NEW) Attached Equipment: Two (2) burners Control: RTO
II.A.11 Finisher
One (1) Finishing Device (used to finish the item to the proper size by cutting, folding, gluing,
etc.)

II.A.12 Rewinders Five (5) Rewinders
DAQE-IN158320003-24
Page 7

II.A.13 Seamer, Cutter, Pouch Machines, Bag Machine One (1) Seamer One (1) Cutter Two (2) Pouch Machines One (1) Bag Machine For information purposes only.

SECTION II: SPECIAL PROVISIONS

The intent is to issue an air quality AO authorizing the project with the following recommended
conditions and that failure to comply with any of the conditions may constitute a violation of the AO. II.B REQUIREMENTS AND LIMITATIONS
II.B.1 Site-wide Requirements II.B.1.a The owner/operator shall not allow visible emissions from any stationary point or fugitive emission source on site to exceed 10% opacity. [R307-401-8]
II.B.1.a.1 Opacity observations of emissions from stationary sources shall be conducted in accordance with 40 CFR 60, Appendix A, Method 9. [R307-401-8] II.B.2 VOC Requirements
II.B.2.a The VOC content of the inks used at this plant shall not exceed the density limits established by R307-351. Inks shall not be thinned or otherwise reduced beyond the manufacturer’s recommendations. [R307-351] II.B.2.a.1 The density parameters shall be tested by using the appropriate ASTM method or another method approved by the Director. [R307-401-8]
II.B.2.b The plant-wide emissions of VOCs from the printing presses and associated operations shall not exceed: 19.35 tons per rolling 12-month period for VOCs. [R307-401-8] II.B.2.b.1 Compliance with each limitation shall be determined on a rolling 12-month total. Based on the 20th day of each month, a new 12-month total shall be calculated using data from the previous 12 months. [R307-401-8]
DAQE-IN158320003-24
Page 8

II.B.2.b.2 The VOC emissions shall be determined by maintaining a record of VOC-emitting materials used each month. The record shall include the following data for each material used: A. Name of the VOC-emitting material, such as ink, adhesive, solvent, thinner, reducers, chemical compounds, toxics, isocyanates, etc. B. Density of each material used (pounds per gallon). C. Percent by weight of all VOC in each material used. D. Gallons of each VOC-emitting material used. E. The amount of VOC emitted monthly by each material used shall be calculated by the following procedure: VOC = (% VOC by Weight/100) x [Density (lb/gal )] x Gal Consumed x (1 ton/2000 lb) F. The amount of VOC emitted monthly from all materials used. G. The amount of VOCs reclaimed for the month shall be similarly quantified and subtracted from the quantities calculated above to provide the monthly total VOC emissions. H. VOCs from the floor sweeps, the Uteco 8 press, and the Uteco 8XS are controlled by the RTO and shall be accounted for assuming 95% capture efficiency and 98% control efficiency. [R307-401-8]
II.B.2.c The owner/operator shall not use any chemicals with any HAPs in the printing presses and associated operations in the plant. [R307-401-8]

II.B.2.c.1 The owner/operator shall use the most recent version of the SDS' to demonstrate compliance with the HAP requirement above. [R307-401-8]
II.B.3 RTO Requirements
II.B.3.a The owner/operator shall route all emissions from the floor sweeps, Uteco 8 Press, and Uteco 8XS Press to the RTO before being vented to the atmosphere. [R307-401-8]
II.B.3.b At all times while operating, the owner/operator shall maintain a temperature at or above 1,500
degrees Fahrenheit in the RTO. [R307-401-8]
II.B.3.c The owner/operator shall install, calibrate, maintain, and operate a device to monitor the operating temperature of the RTO. [R307-401-8]
II.B.3.c.1 The monitoring device shall be located such that an inspector/operator can safely read the output
at any time. The operating temperature of the RTO shall be recorded on a daily basis when the
RTO operates. [R307-401-8]

DAQE-IN158320003-24
Page 9

PERMIT HISTORY

This Approval Order shall supersede (if a modification) or will be based on the following documents: Supersedes AO DAQE-AN158320001-18 dated December 18, 2018 Is Derived From NOI dated April 30, 2021 Incorporates Additional information dated June 3, 2021 Incorporates Additional Information dated April 25, 2023 Incorporates Additional Information dated May 16, 2023 Incorporates Additional Information dated May 19, 2023

DAQE-IN158320003-24
Page 10

ACRONYMS

The following lists commonly used acronyms and associated translations as they apply to this document:

40 CFR Title 40 of the Code of Federal Regulations
AO Approval Order
BACT Best Available Control Technology
CAA Clean Air Act
CAAA Clean Air Act Amendments
CDS Classification Data System (used by Environmental Protection Agency to classify
sources by size/type)
CEM Continuous emissions monitor
CEMS Continuous emissions monitoring system
CFR Code of Federal Regulations
CMS Continuous monitoring system
CO Carbon monoxide
CO2 Carbon Dioxide
CO2e Carbon Dioxide Equivalent - Title 40 of the Code of Federal Regulations Part 98,
Subpart A, Table A-1
COM Continuous opacity monitor
DAQ/UDAQ Division of Air Quality
DAQE This is a document tracking code for internal Division of Air Quality use
EPA Environmental Protection Agency
FDCP Fugitive dust control plan
GHG Greenhouse Gas(es) - Title 40 of the Code of Federal Regulations 52.21 (b)(49)(i)
GWP Global Warming Potential - Title 40 of the Code of Federal Regulations Part 86.1818-
12(a)
HAP or HAPs Hazardous air pollutant(s)
ITA Intent to Approve
LB/YR Pounds per year MACT Maximum Achievable Control Technology MMBTU Million British Thermal Units NAA Nonattainment Area NAAQS National Ambient Air Quality Standards NESHAP National Emission Standards for Hazardous Air Pollutants NOI Notice of Intent
NOx Oxides of nitrogen
NSPS New Source Performance Standard
NSR New Source Review
PM10 Particulate matter less than 10 microns in size
PM2.5 Particulate matter less than 2.5 microns in size
PSD Prevention of Significant Deterioration
PTE Potential to Emit
R307 Rules Series 307
R307-401 Rules Series 307 - Section 401
SO2 Sulfur dioxide
Title IV Title IV of the Clean Air Act
Title V Title V of the Clean Air Act
TPY Tons per year
UAC Utah Administrative Code
VOC Volatile organic compounds

Standard Examiner
Publication Name:
Standard Examiner
Publication URL:
www.standard.net
Publication City and State:
Ogden, UT
Publication County:
Weber
Notice Popular Keyword Category:
Notice Keywords:
PPC
Notice Authentication Number:
202410221030273494662
1761527914
Notice URL:
Back
Notice Publish Date:
Friday, October 18, 2024
Notice Content
NOTICE A Notice of Intent for the following project submitted in accordance with R307-401-1, Utah Administrative Code (UAC), has been
received for consideration by the Director: Company Name: PPC Flexible Packaging Location: PPC Flexible Packaging - Flexographic Printing
Facility - 95 South River Bend Way, North Salt Lake, UT Project Description: PPC Flexible Packaging has requested to add one (1) color
printer and one (1) printer/laminator. Facility-wide PTE were re-evaluated as part of this modification based on updated equipment lists and
operations. The following updates were made to the AO: 1) Added one (1) Color Printer to equipment list and PTE. 2) Added one (1)
Printer/Laminator to equipment list and PTE. 3) Updated site-wide PTE. The completed engineering evaluation and air quality impact analysis
showed the proposed project meets the requirements of federal air quality regulations and the State air quality rules. The Director intends to
issue an Approval Order pending a 30-day public comment period. The project proposal, estimate of the effect on local air quality, and draft
Approval Order are available for public inspection and comment at the Utah Division of Air Quality, 195 North 1950 West, Salt Lake City, UT
84116. Written comments received by the Division at this same address on or before November 17, 2024. will be considered in making the
final decision on the approval/disapproval of the proposed project. Email comments will also be accepted at [e-mail]. If anyone so
requests to the Director in writing within 15 days of publication of this notice, a hearing will be held in accordance with R307-401-7, UAC.
Under Section 19-1-301.5, a person who wishes to challenge a Permit Order may only raise an issue or argument during an adjudicatory
proceeding that was raised during the public comment period and was supported with sufficient information or documentation to enable the
Director to fully consider the substance and significance of the issue. Date of Notice: October 18, 2024 Legal Notice 13339 Published in the
Standard Examiner on October 18, 2024
Back

DAQE-NN158320003-24

October 16, 2024

Ogden Standard Examiner
Legal Advertising Department
332 Standard Way
PO Box 12790
Ogden, UT 84412
Account #100331

RE: Legal Notice of Intent to Approve

This letter will confirm the authorization to publish the attached NOTICE in the Ogden Standard
Examiner on October 18, 2024.

Please mail the invoice and affidavit of publication to the Utah State Department of Environmental
Quality, Division of Air Quality, P.O. Box 144820, Salt Lake City, Utah 84114-4820. If you have any
questions, contact Jeree Greenwood, who may be reached at [phone].

Sincerely,

{{$s }}

Jeree Greenwood
Office Technician

Enclosure

cc: Wasatch Front Regional Council
cc: Davis County

195 North 1950 West • Salt Lake City, UT
Mailing Address: P.O. Box 144820 • Salt Lake City, UT 84114-4820
Telephone [phone] • Fax [phone] • T.D.D. [phone]
www.deq.utah.gov
Printed on 100% recycled paper
State of Utah

SPENCER J. COX
Governor
DEIDRE HENDERSON
Lieutenant Governor

Department of
Environmental Quality

Kimberly D. Shelley
Executive Director

DIVISION OF AIR QUALITY
Bryce C. Bird
Director

DAQE-NN158320003-24
Page 2
NOTICE

A Notice of Intent for the following project submitted in accordance with R307-401-1, Utah
Administrative Code (UAC), has been received for consideration by the Director:

Company Name: PPC Flexible Packaging
Location: PPC Flexible Packaging - Flexographic Printing Facility – 95 South River Bend
Way, North Salt Lake, UT
Project Description: PPC Flexible Packaging has requested to add one (1) color printer and one (1)
printer/laminator. Facility-wide PTE were re-evaluated as part of this
modification based on updated equipment lists and operations. The following
updates were made to the AO:

1) Added one (1) Color Printer to equipment list and PTE.
2) Added one (1) Printer/Laminator to equipment list and PTE.
3) Updated site-wide PTE.

The completed engineering evaluation and air quality impact analysis showed the proposed project meets
the requirements of federal air quality regulations and the State air quality rules. The Director intends to
issue an Approval Order pending a 30-day public comment period. The project proposal, estimate of the
effect on local air quality, and draft Approval Order are available for public inspection and comment at
the Utah Division of Air Quality, 195 North 1950 West, Salt Lake City, UT 84116. Written comments
received by the Division at this same address on or before November 17, 2024. will be considered in
making the final decision on the approval/disapproval of the proposed project. Email comments will also
be accepted at [e-mail]. If anyone so requests to the Director in writing within 15 days of
publication of this notice, a hearing will be held in accordance with R307-401-7, UAC.

Under Section 19-1-301.5, a person who wishes to challenge a Permit Order may only raise an issue or
argument during an adjudicatory proceeding that was raised during the public comment period and was
supported with sufficient information or documentation to enable the Director to fully consider the
substance and significance of the issue.

Date of Notice: October 18, 2024

{{#s=Sig_es_:signer1:signature}}

DAQE-

RN158320003 September 13, 2024
John Rogers
PPC Flexible Packaging 213 Temkin Way Payson, UT 84651
[e-mail]
Dear John Rogers,
Re: Engineer Review: Modification to Approval Order DAQE-AN158320001-18 to Add Equipment Project Number: N158320003
The DAQ requests a company representative review and sign the attached Engineer Review (ER). This ER identifies all applicable elements of the New Source Review permitting program. PPC Flexible Packaging should complete this review within 10 business days of receipt.
PPC Flexible Packaging should contact Stockon Antczak at [phone] if there are questions or concerns with the review of the draft permit conditions. Upon resolution of your concerns, please email Stockon Antczak at [e-mail] the signed cover letter. Upon receipt of the signed cover letter, the DAQ will prepare an ITA for a 30-day public comment period. At the completion of the comment period, the DAQ will address any comments and will prepare an Approval Order (AO) for signature by the DAQ Director.
If PPC Flexible Packaging does not respond to this letter within 10 business days, the project will move
forward without source concurrence. If PPC Flexible Packaging has concerns that cannot be resolved and the project becomes stagnant, the DAQ Director may issue an Order prohibiting construction.
Approval Signature _____________________________________________________________ (Signature & Date)
195 North 1950 West • Salt Lake City, UT
Mailing Address: P.O. Box 144820 • Salt Lake City, UT 84114-4820
Telephone [phone] • Fax [phone] • T.D.D. [phone]
www.deq.utah.gov
Printed on 100% recycled paper
Department of Environmental Quality
Kimberly D. Shelley Executive Director
DIVISION OF AIR QUALITY Bryce C. Bird Director State of Utah
SPENCER J. COX Governor
DEIDRE HENDERSON Lieutenant Governor
10/08/24

Engineer Review N158320003: PPC Flexible Packaging- Flexographic Printing Facility September 13, 2024 Page 1
UTAH DIVISION OF AIR QUALITY
ENGINEER REVIEW

SOURCE INFORMATION
Project Number N158320003 Owner Name PPC Flexible Packaging Mailing Address 213 Temkin Way
Payson, UT, 84651 Source Name PPC Flexible Packaging- Flexographic Printing Facility
Source Location 95 South River Bend Way North Salt Lake, UT 84054
UTM Projection 420,424 m Easting, 4,521,401 m Northing UTM Datum NAD83 UTM Zone UTM Zone 12 SIC Code 2752 (Commercial Printing, Lithographic) Source Contact John Rogers Phone Number [phone] Email [e-mail] Billing Contact John Rogers Phone Number 801-494-7213
Email [e-mail] Project Engineer Stockon Antczak, Engineer
Phone Number [phone] Email [e-mail]
Notice of Intent (NOI) Submitted April 30, 2021 Date of Accepted Application April 25, 2023

Engineer Review N158320003: PPC Flexible Packaging- Flexographic Printing Facility September 13, 2024 Page 2
SOURCE DESCRIPTION General Description
PPC Flexible Packaging (PPC) operates a flexographic printing plant located in North Salt Lake. The equipment on site consists of various presses, laminators, and finishing and packaging machines. The VOC emissions from all the operations at the plant will be controlled by a
regenerative thermal oxidizer (RTO) that uses supplemental natural gas to maintain the operating temperature. The VOC emissions from the ink and solvent storage areas, ink mixing areas, printer de-inking areas, the Uteco 8 color press device, and three floor sweeps are controlled by the RTO as well. NSR Classification: Minor Modification at Minor Source Source Classification Located in, Northern Wasatch Front O3 NAA, Salt Lake City UT PM2.5 NAA, Davis County
Airs Source Size: B Applicable Federal Standards
Project Proposal Modification to Approval Order DAQE-AN158320001-18 to Add Equipment
Project Description PPC has requested to add one (1) color printer and one (1) printer/laminator. Facility-wide PTE were re-evaluated as part of this modification based on updated equipment list and operations. The following updates were made to the AO:
1) Added one (1) Color Printer to equipment list and PTE 2) Added one (1) Printer/Laminator to equipment list and PTE 3) Updated site-wide PTE EMISSION IMPACT ANALYSIS
All criteria pollutants are below the modeling thresholds contained in R307-410-4. All HAP emissions are
below their respective emission threshold values in R307-410-5. Therefore, no modeling is required from this source. [Last updated March 5, 2024]

Engineer Review N158320003: PPC Flexible Packaging- Flexographic Printing Facility September 13, 2024 Page 3
SUMMARY OF EMISSIONS
The emissions listed below are an estimate of the total potential emissions from the source. Some rounding of emissions is possible.
Criteria Pollutant Change (TPY) Total (TPY) CO2 Equivalent 0 1958.00 Carbon Monoxide 0 1.37
Nitrogen Oxides 0 1.63
Particulate Matter - PM10 0 0.10
Particulate Matter - PM2.5 0 0.10
Sulfur Dioxide 0 0.01
Volatile Organic Compounds 9.67 19.35 Hazardous Air Pollutant Change (lbs/yr) Total (lbs/yr)
Formaldehyde (CAS #50000) 2
Glycol Ethers (CAS #EDF109) 28
Hexane (CAS #110543) 0 59
Methanol (CAS #67561) 18
Naphthalene (CAS #91203) 0 7 Change (TPY) Total (TPY) Total HAPs 0.03 0.06

Note: Change in emissions indicates the difference between previous AO and proposed modification.

Engineer Review N158320003: PPC Flexible Packaging- Flexographic Printing Facility September 13, 2024 Page 4
Review of BACT for New/Modified Emission Units 1. BACT review regarding Printers
The source proposed the addition of one Uteco 8XS Color Printer. Emissions from the printer will be VOC. The source plans to route emissions from this printer to the operating Regenerative Thermal Oxidizer (RTO). DAQ has determined BACT to be the following:
1. Operate and maintain the printer in accordance to the manufacturer's recommendations 2. Route printer emissions to the operating RTO The source proposed the addition of one Uteco Mistral Printer/Laminator. Emissions from this printer/laminator will be VOC. Water-based ink and adhesives products will be primarily used
with this printer/laminator, which are not compatible with the operating RTO. The water-based VOC emissions would not be enough for other controls to be cost effective. DAQ has determined BACT to be to operate and maintain the printer in accordance to the manufacturer's
recommendations.
[Last updated June 12, 2024]
SECTION I: GENERAL PROVISIONS The intent is to issue an air quality AO authorizing the project with the following recommended
conditions and that failure to comply with any of the conditions may constitute a violation of the AO. (New or Modified conditions are indicated as “New” in the Outline Label):
I.1 All definitions, terms, abbreviations, and references used in this AO conform to those used in the UAC R307 and 40 CFR. Unless noted otherwise, references cited in these AO conditions refer to those rules. [R307-101]
I.2 The limits set forth in this AO shall not be exceeded without prior approval. [R307-401]
I.3 Modifications to the equipment or processes approved by this AO that could affect the
emissions covered by this AO must be reviewed and approved. [R307-401-1] I.4 All records referenced in this AO or in other applicable rules, which are required to be kept by the owner/operator, shall be made available to the Director or Director's representative upon request, and the records shall include the two-year period prior to the date of the request. Unless otherwise specified in this AO or in other applicable state and federal rules, records shall be kept for a minimum of two (2) years. [R307-401-8]

Engineer Review N158320003: PPC Flexible Packaging- Flexographic Printing Facility September 13, 2024 Page 5
I.5 At all times, including periods of startup, shutdown, and malfunction, owners and operators shall, to the extent practicable, maintain and operate any equipment approved under this AO, including associated air pollution control equipment, in a manner consistent with good air
pollution control practice for minimizing emissions. Determination of whether acceptable operating and maintenance procedures are being used will be based on information available to the Director which may include, but is not limited to, monitoring results, opacity
observations, review of operating and maintenance procedures, and inspection of the source. All maintenance performed on equipment authorized by this AO shall be recorded. [R307-401-4]

I.6 The owner/operator shall comply with UAC R307-107. General Requirements: Breakdowns. [R307-107]
I.7 The owner/operator shall comply with UAC R307-150 Series. Emission Inventories. [R307-150]
I.8 The owner/operator shall submit documentation of the status of construction or modification to the Director within 18 months from the date of this AO. This AO may become invalid if construction is not commenced within 18 months from the date of this AO or if construction is discontinued for 18 months or more. To ensure proper credit when notifying the Director, send the documentation to the Director, attn.: NSR Section. [R307-401-18]

SECTION II: PERMITTED EQUIPMENT The intent is to issue an air quality AO authorizing the project with the following recommended conditions and that failure to comply with any of the conditions may constitute a violation of the
AO. (New or Modified conditions are indicated as “New” in the Outline Label): II.A THE APPROVED EQUIPMENT
II.A.1 Target Labels and Packaging Flexographic Printing Plant
II.A.2 Floor Sweeps Three (3) Floor Sweeps The vents (floor sweeps) are placed in the floors to capture VOC emissions from the ink
storage area, the roll changing (plating) area, and the Uteco press operations. Control: RTO
II.A.3 Regenerative Thermal Oxidizer (RTO)
RTO Device Fuel: Natural Gas Capacity: 3 MMBtu/hr
Processes Controlled: Three (3) floor sweeps, Uteco 8 Press, and Uteco 8XS Press II.A.4 Ink and Roll Storage Areas Fugitive emissions from the ink storage, roll storage, and change-out areas that aren't captured
in the floor sweeps.

Engineer Review N158320003: PPC Flexible Packaging- Flexographic Printing Facility September 13, 2024 Page 6
II.A.5 Digital Presses One (1) Digital Press Attached equipment: electric dryer and corona treater
One (1) Digital Press Attached equipment: electric dryer
II.A.6 In-Line Flexo Presses One (1) In-Line Press Attached equipment: electric dryer and corona treater
One (1) In-Line Press Attached equipment: electric dryer II.A.7 Super Simplex Printer One (1) Super Simplex Printer Attached equipment: corona treater
II.A.8 Uteco 8 Color Press Attached equipment: Two (2) burners Control: RTO
Air flow rate: 15,000 scfm II.A.9 NEW Uteco Mistral Printer/Laminator (NEW) Attached equipment: One (1) burner, corona treater
II.A.10 NEW Uteco 8XS Color Press (NEW) Attached Equipment: Two (2) burners Control: RTO
II.A.11 Finisher One (1) Finishing Device (used to finish the item to the proper size by cutting, folding, gluing, etc.)

II.A.12 Rewinders Five (5) Rewinders
II.A.13 Seamer, Cutter, Pouch Machines, Bag Machine One (1) Seamer One (1) Cutter Two (2) Pouch Machines One (1) Bag Machine
For information purposes only.

SECTION II: SPECIAL PROVISIONS
The intent is to issue an air quality AO authorizing the project with the following recommended
conditions and that failure to comply with any of the conditions may constitute a violation of the AO. (New or Modified conditions are indicated as “New” in the Outline Label):

Engineer Review N158320003: PPC Flexible Packaging- Flexographic Printing Facility September 13, 2024 Page 7
II.B REQUIREMENTS AND LIMITATIONS
II.B.1
NEW
Site-wide Requirements
II.B.1.a NEW The owner/operator shall not allow visible emissions from any stationary point or fugitive emission source on site to exceed 10% opacity. [R307-401-8] II.B.1.a.1 Opacity observations of emissions from stationary sources shall be conducted in accordance with 40 CFR 60, Appendix A, Method 9. [R307-401-8]

II.B.2 NEW VOC Requirements
II.B.2.a The VOC content of the inks used at this plant shall not exceed the density limits established by R307-351. Inks shall not be thinned or otherwise reduced beyond manufacturers recommendations. [R307-351]
II.B.2.a.1 The density parameters shall be tested by using the appropriate ASTM method or another method approved by the Director. [R307-401-8]
II.B.2.b NEW The plant-wide emissions of VOCs from the printing presses and associated operations shall not exceed:
19.35 tons per rolling 12-month period for VOCs. [R307-401-8]
II.B.2.b.1 NEW Compliance with each limitation shall be determined on a rolling 12-month total. Based on the 20th day of each month, a new 12-month total shall be calculated using data from the previous 12 months. [R307-401-8]

Engineer Review N158320003: PPC Flexible Packaging- Flexographic Printing Facility September 13, 2024 Page 8
NEW The VOC emissions shall be determined by maintaining a record of VOC emitting materials used each month. The record shall include the following data for each material used: A. Name of the VOC-emitting material, such as: ink, adhesive, solvent, thinner, reducers, chemical compounds, toxics, isocyanates, etc. B. Density of each material used (pounds per gallon) C. Percent by weight of all VOC in each material used D. Gallons of each VOC-emitting material used
E. The amount of VOC emitted monthly by each material used shall be calculated by the following procedure: VOC = (% VOC by Weight/100) x [Density (lb/gal )] x Gal Consumed x (1 ton/2000 lb) F. The amount of VOC emitted monthly from all materials used.
G. The amount of VOCs reclaimed for the month shall be similarly quantified and subtracted
from the quantities calculated above to provide the monthly total VOC emissions. H. VOCs from the floor sweeps, the Uteco 8 press, and the Uteco 8XS are controlled by the RTO and shall be accounted for assuming 95% capture efficiency and 98% control efficiency. [R307-401-8]

II.B.2.c The owner/operator shall not use any chemicals with any HAPs in the printing presses and associated operations in the plant. [R307-401-8] II.B.2.c.1 The owner/operator shall use the most recent version of the SDS' to demonstrate compliance with the HAP requirement above. [R307-401-8]
II.B.3 NEW RTO Requirements
II.B.3.a NEW The owner/operator shall route all emissions from the floor sweeps, Uteco 8 Press, and Uteco 8XS Press to the RTO before being vented to the atmosphere. [R307-401-8]
II.B.3.b At all times while operating, the owner/operator shall maintain a temperature at or above 1,500 degrees Fahrenheit in the RTO. [R307-401-8] II.B.3.c The owner/operator shall install, calibrate, maintain, and operate a device to monitor the operating temperature of the RTO. [R307-401-8]

II.B.3.c.1 The monitoring device shall be located such that an inspector/operator can safely read the output at any time. The operating temperature of the RTO shall be recorded on a daily basis when the RTO operates. [R307-401-8]

Engineer Review N158320003: PPC Flexible Packaging- Flexographic Printing Facility September 13, 2024 Page 9
PERMIT HISTORY When issued, the approval order shall supersede (if a modification) or will be based on the
following documents: Supersedes DAQE-AN158320001-18 dated December 18, 2018
Is Derived From NOI dated April 30, 2021 Incorporates Additional information dated June 3, 2021 Incorporates Additional Information dated April 25, 2023 Incorporates Additional Information dated May 16, 2023 Incorporates Additional Information dated May 19, 2023
REVIEWER COMMENTS 1. Comment regarding Emission estimates: The VOC emissions from the use of flexographic printing in two separate devices is on a mass balance basis. Each printing material and solvent used is represented and tabulated based on current material flow through the process times an increase of 10% in the amounts used per year. The RTO uses the VOC containing gasses from the whole printing process. The RTO captures 95% of the emissions from the floor sweeping areas, the Uteco 8 press, and the Uteco 8XS press, and has a control efficiency of 98%. Natural gas is used to keep the temperature up to at least 1500 F and it is
the use of natural gas that is estimated to represent the emissions from the RTO. AP-42 section 1.4 is used to estimate emissions of the criteria pollutants from this process. [Last updated March 5, 2024] 2. Comment regarding NSPS and MACT Review: This plant has no applicability to NSPS standard 40 CFR 60, or to MACT standard 40 CFR 63. 40 CFR 63 Subpart KK applies to flexographic printing plants that are a major source of HAP emissions; with above 10 tpy for a single HAP and above 25 tpy for combined HAPs. Area sources of HAPs do not qualify for regulation under 63 Subpart KK. [Last updated May 5, 2021]
3. Comment regarding Title V Requirements: Title V of the 1990 Clean Air Act (Title V) applies to the following:
1. Any major source
2. Any source subject to a standard, limitation, or other requirement under Section 111 of the Act, Standards of Performance for New Stationary Sources; 3. Any source subject to a standard or other requirement under Section 112 of the Act, Hazardous Air Pollutants. 4. Any Title IV affected source. This facility is not a major source and is not a Title IV source. The facility is not subject to 40 CFR 60 (NSPS), 40 CFR 61 (NESHAP), or 40 CFR 63 (MACT) regulations. There are no other reasons
why this source would be required to obtain a part 70 permit; therefore, Title V does not apply to this facility. [Last updated May 5, 2021]

Engineer Review N158320003: PPC Flexible Packaging- Flexographic Printing Facility September 13, 2024 Page 10
ACRONYMS The following lists commonly used acronyms and associated translations as they apply to this document:
40 CFR Title 40 of the Code of Federal Regulations AO Approval Order BACT Best Available Control Technology
CAA Clean Air Act CAAA Clean Air Act Amendments CDS Classification Data System (used by EPA to classify sources by size/type) CEM Continuous emissions monitor CEMS Continuous emissions monitoring system CFR Code of Federal Regulations CMS Continuous monitoring system CO Carbon monoxide CO2 Carbon Dioxide CO2e Carbon Dioxide Equivalent - 40 CFR Part 98, Subpart A, Table A-1 COM Continuous opacity monitor
DAQ/UDAQ Division of Air Quality DAQE This is a document tracking code for internal UDAQ use EPA Environmental Protection Agency
FDCP Fugitive dust control plan GHG Greenhouse Gas(es) - 40 CFR 52.21 (b)(49)(i) GWP Global Warming Potential - 40 CFR Part 86.1818-12(a)
HAP or HAPs Hazardous air pollutant(s) ITA Intent to Approve LB/HR Pounds per hour
LB/YR Pounds per year MACT Maximum Achievable Control Technology MMBTU Million British Thermal Units
NAA Nonattainment Area NAAQS National Ambient Air Quality Standards NESHAP National Emission Standards for Hazardous Air Pollutants NOI Notice of Intent NOx Oxides of nitrogen NSPS New Source Performance Standard NSR New Source Review PM10 Particulate matter less than 10 microns in size
PM2.5 Particulate matter less than 2.5 microns in size PSD Prevention of Significant Deterioration PTE Potential to Emit
R307 Rules Series 307 R307-401 Rules Series 307 - Section 401 SO2 Sulfur dioxide
Title IV Title IV of the Clean Air Act Title V Title V of the Clean Air Act TPY Tons per year
UAC Utah Administrative Code VOC Volatile organic compounds
DAQE-

RN158320003 September 13, 2024 John Rogers
PPC Flexible Packaging 213 Temkin Way Payson, UT 84651
[e-mail] Dear John Rogers,
Re: Engineer Review: Modification to Approval Order DAQE-AN158320001-18 to Add Equipment Project Number: N158320003 The DAQ requests a company representative review and sign the attached Engineer Review (ER). This ER identifies all applicable elements of the New Source Review permitting program. PPC Flexible Packaging should complete this review within 10 business days of receipt. PPC Flexible Packaging should contact Stockon Antczak at [phone] if there are questions or concerns with the review of the draft permit conditions. Upon resolution of your concerns, please email Stockon Antczak at [e-mail] the signed cover letter. Upon receipt of the signed cover letter, the DAQ will prepare an ITA for a 30-day public comment period. At the completion of the comment period, the DAQ will address any comments and will prepare an Approval Order (AO) for signature by the DAQ Director. If PPC Flexible Packaging does not respond to this letter within 10 business days, the project will move
forward without source concurrence. If PPC Flexible Packaging has concerns that cannot be resolved and the project becomes stagnant, the DAQ Director may issue an Order prohibiting construction. Approval Signature _____________________________________________________________ (Signature & Date)
195 North 1950 West • Salt Lake City, UT
Mailing Address: P.O. Box 144820 • Salt Lake City, UT 84114-4820
Telephone [phone] • Fax [phone] • T.D.D. [phone]
www.deq.utah.gov
Printed on 100% recycled paper
Department of Environmental Quality
Kimberly D. Shelley Executive Director DIVISION OF AIR QUALITY Bryce C. Bird Director
State of Utah
SPENCER J. COX Governor DEIDRE HENDERSON Lieutenant Governor

Engineer Review N158320003: PPC Flexible Packaging- Flexographic Printing Facility September 13, 2024 Page 1
UTAH DIVISION OF AIR QUALITY
ENGINEER REVIEW

SOURCE INFORMATION
Project Number N158320003 Owner Name PPC Flexible Packaging Mailing Address 213 Temkin Way
Payson, UT, 84651 Source Name PPC Flexible Packaging- Flexographic Printing Facility
Source Location 95 South River Bend Way North Salt Lake, UT 84054
UTM Projection 420,424 m Easting, 4,521,401 m Northing UTM Datum NAD83 UTM Zone UTM Zone 12 SIC Code 2752 (Commercial Printing, Lithographic) Source Contact John Rogers Phone Number [phone] Email [e-mail] Billing Contact John Rogers Phone Number 801-494-7213
Email [e-mail] Project Engineer Stockon Antczak, Engineer
Phone Number [phone] Email [e-mail]
Notice of Intent (NOI) Submitted April 30, 2021 Date of Accepted Application April 25, 2023

Engineer Review N158320003: PPC Flexible Packaging- Flexographic Printing Facility September 13, 2024 Page 2
SOURCE DESCRIPTION General Description
PPC Flexible Packaging (PPC) operates a flexographic printing plant located in North Salt Lake. The equipment on site consists of various presses, laminators, and finishing and packaging machines. The VOC emissions from all the operations at the plant will be controlled by a
regenerative thermal oxidizer (RTO) that uses supplemental natural gas to maintain the operating temperature. The VOC emissions from the ink and solvent storage areas, ink mixing areas, printer de-inking areas, the Uteco 8 color press device, and three floor sweeps are controlled by the RTO as well. NSR Classification: Minor Modification at Minor Source Source Classification Located in, Northern Wasatch Front O3 NAA, Salt Lake City UT PM2.5 NAA, Davis County
Airs Source Size: B Applicable Federal Standards
Project Proposal Modification to Approval Order DAQE-AN158320001-18 to Add Equipment
Project Description PPC has requested to add one (1) color printer and one (1) printer/laminator. Facility-wide PTE were re-evaluated as part of this modification based on updated equipment list and operations. The following updates were made to the AO:
1) Added one (1) Color Printer to equipment list and PTE 2) Added one (1) Printer/Laminator to equipment list and PTE 3) Updated site-wide PTE EMISSION IMPACT ANALYSIS
All criteria pollutants are below the modeling thresholds contained in R307-410-4. All HAP emissions are
below their respective emission threshold values in R307-410-5. Therefore, no modeling is required from this source. [Last updated March 5, 2024]

Engineer Review N158320003: PPC Flexible Packaging- Flexographic Printing Facility September 13, 2024 Page 3
SUMMARY OF EMISSIONS
The emissions listed below are an estimate of the total potential emissions from the source. Some rounding of emissions is possible.
Criteria Pollutant Change (TPY) Total (TPY) CO2 Equivalent 0 1958.00 Carbon Monoxide 0 1.37
Nitrogen Oxides 0 1.63
Particulate Matter - PM10 0 0.10
Particulate Matter - PM2.5 0 0.10
Sulfur Dioxide 0 0.01
Volatile Organic Compounds 9.67 19.35 Hazardous Air Pollutant Change (lbs/yr) Total (lbs/yr)
Formaldehyde (CAS #50000) 2
Glycol Ethers (CAS #EDF109) 28
Hexane (CAS #110543) 0 59
Methanol (CAS #67561) 18
Naphthalene (CAS #91203) 0 7 Change (TPY) Total (TPY) Total HAPs 0.03 0.06

Note: Change in emissions indicates the difference between previous AO and proposed modification.

Engineer Review N158320003: PPC Flexible Packaging- Flexographic Printing Facility September 13, 2024 Page 4
Review of BACT for New/Modified Emission Units 1. BACT review regarding Printers
The source proposed the addition of one Uteco 8XS Color Printer. Emissions from the printer will be VOC. The source plans to route emissions from this printer to the operating Regenerative Thermal Oxidizer (RTO). DAQ has determined BACT to be the following:
1. Operate and maintain the printer in accordance to the manufacturer's recommendations 2. Route printer emissions to the operating RTO The source proposed the addition of one Uteco Mistral Printer/Laminator. Emissions from this printer/laminator will be VOC. Water-based ink and adhesives products will be primarily used
with this printer/laminator, which are not compatible with the operating RTO. The water-based VOC emissions would not be enough for other controls to be cost effective. DAQ has determined BACT to be to operate and maintain the printer in accordance to the manufacturer's
recommendations.
[Last updated June 12, 2024]
SECTION I: GENERAL PROVISIONS The intent is to issue an air quality AO authorizing the project with the following recommended
conditions and that failure to comply with any of the conditions may constitute a violation of the AO. (New or Modified conditions are indicated as “New” in the Outline Label):
I.1 All definitions, terms, abbreviations, and references used in this AO conform to those used in the UAC R307 and 40 CFR. Unless noted otherwise, references cited in these AO conditions refer to those rules. [R307-101]
I.2 The limits set forth in this AO shall not be exceeded without prior approval. [R307-401]
I.3 Modifications to the equipment or processes approved by this AO that could affect the
emissions covered by this AO must be reviewed and approved. [R307-401-1] I.4 All records referenced in this AO or in other applicable rules, which are required to be kept by the owner/operator, shall be made available to the Director or Director's representative upon request, and the records shall include the two-year period prior to the date of the request. Unless otherwise specified in this AO or in other applicable state and federal rules, records shall be kept for a minimum of two (2) years. [R307-401-8]

Engineer Review N158320003: PPC Flexible Packaging- Flexographic Printing Facility September 13, 2024 Page 5
I.5 At all times, including periods of startup, shutdown, and malfunction, owners and operators shall, to the extent practicable, maintain and operate any equipment approved under this AO, including associated air pollution control equipment, in a manner consistent with good air
pollution control practice for minimizing emissions. Determination of whether acceptable operating and maintenance procedures are being used will be based on information available to the Director which may include, but is not limited to, monitoring results, opacity
observations, review of operating and maintenance procedures, and inspection of the source. All maintenance performed on equipment authorized by this AO shall be recorded. [R307-401-4]

I.6 The owner/operator shall comply with UAC R307-107. General Requirements: Breakdowns. [R307-107]
I.7 The owner/operator shall comply with UAC R307-150 Series. Emission Inventories. [R307-150]
I.8 The owner/operator shall submit documentation of the status of construction or modification to the Director within 18 months from the date of this AO. This AO may become invalid if construction is not commenced within 18 months from the date of this AO or if construction is discontinued for 18 months or more. To ensure proper credit when notifying the Director, send the documentation to the Director, attn.: NSR Section. [R307-401-18]

SECTION II: PERMITTED EQUIPMENT The intent is to issue an air quality AO authorizing the project with the following recommended conditions and that failure to comply with any of the conditions may constitute a violation of the
AO. (New or Modified conditions are indicated as “New” in the Outline Label): II.A THE APPROVED EQUIPMENT
II.A.1 Target Labels and Packaging Flexographic Printing Plant
II.A.2 Floor Sweeps Three (3) Floor Sweeps The vents (floor sweeps) are placed in the floors to capture VOC emissions from the ink
storage area, the roll changing (plating) area, and the Uteco press operations. Control: RTO
II.A.3 Regenerative Thermal Oxidizer (RTO)
RTO Device Fuel: Natural Gas Capacity: 3 MMBtu/hr
Processes Controlled: Three (3) floor sweeps, Uteco 8 Press, and Uteco 8XS Press II.A.4 Ink and Roll Storage Areas Fugitive emissions from the ink storage, roll storage, and change-out areas that aren't captured
in the floor sweeps.

Engineer Review N158320003: PPC Flexible Packaging- Flexographic Printing Facility September 13, 2024 Page 6
II.A.5 Digital Presses One (1) Digital Press Attached equipment: electric dryer and corona treater
One (1) Digital Press Attached equipment: electric dryer
II.A.6 In-Line Flexo Presses One (1) In-Line Press Attached equipment: electric dryer and corona treater
One (1) In-Line Press Attached equipment: electric dryer II.A.7 Super Simplex Printer One (1) Super Simplex Printer Attached equipment: corona treater
II.A.8 Uteco 8 Color Press Attached equipment: Two (2) burners Control: RTO
Air flow rate: 15,000 scfm II.A.9 NEW Uteco Mistral Printer/Laminator (NEW) Attached equipment: One (1) burner, corona treater
II.A.10 NEW Uteco 8XS Color Press (NEW) Attached Equipment: Two (2) burners Control: RTO
II.A.11 Finisher One (1) Finishing Device (used to finish the item to the proper size by cutting, folding, gluing, etc.)

II.A.12 Rewinders Five (5) Rewinders
II.A.13 Seamer, Cutter, Pouch Machines, Bag Machine One (1) Seamer One (1) Cutter Two (2) Pouch Machines One (1) Bag Machine
For information purposes only.

SECTION II: SPECIAL PROVISIONS
The intent is to issue an air quality AO authorizing the project with the following recommended
conditions and that failure to comply with any of the conditions may constitute a violation of the AO. (New or Modified conditions are indicated as “New” in the Outline Label):

Engineer Review N158320003: PPC Flexible Packaging- Flexographic Printing Facility September 13, 2024 Page 7
II.B REQUIREMENTS AND LIMITATIONS
II.B.1
NEW
Site-wide Requirements
II.B.1.a NEW The owner/operator shall not allow visible emissions from any stationary point or fugitive emission source on site to exceed 10% opacity. [R307-401-8] II.B.1.a.1 Opacity observations of emissions from stationary sources shall be conducted in accordance with 40 CFR 60, Appendix A, Method 9. [R307-401-8]

II.B.2 NEW VOC Requirements
II.B.2.a The VOC content of the inks used at this plant shall not exceed the density limits established by R307-351. Inks shall not be thinned or otherwise reduced beyond manufacturers recommendations. [R307-351]
II.B.2.a.1 The density parameters shall be tested by using the appropriate ASTM method or another method approved by the Director. [R307-401-8]
II.B.2.b NEW The plant-wide emissions of VOCs from the printing presses and associated operations shall not exceed:
19.35 tons per rolling 12-month period for VOCs. [R307-401-8]
II.B.2.b.1 NEW Compliance with each limitation shall be determined on a rolling 12-month total. Based on the 20th day of each month, a new 12-month total shall be calculated using data from the previous 12 months. [R307-401-8]

Engineer Review N158320003: PPC Flexible Packaging- Flexographic Printing Facility September 13, 2024 Page 8
NEW The VOC emissions shall be determined by maintaining a record of VOC emitting materials used each month. The record shall include the following data for each material used: A. Name of the VOC-emitting material, such as: ink, adhesive, solvent, thinner, reducers, chemical compounds, toxics, isocyanates, etc. B. Density of each material used (pounds per gallon) C. Percent by weight of all VOC in each material used D. Gallons of each VOC-emitting material used
E. The amount of VOC emitted monthly by each material used shall be calculated by the following procedure: VOC = (% VOC by Weight/100) x [Density (lb/gal )] x Gal Consumed x (1 ton/2000 lb) F. The amount of VOC emitted monthly from all materials used.
G. The amount of VOCs reclaimed for the month shall be similarly quantified and subtracted
from the quantities calculated above to provide the monthly total VOC emissions. H. VOCs from the floor sweeps, the Uteco 8 press, and the Uteco 8XS are controlled by the RTO and shall be accounted for assuming 95% capture efficiency and 98% control efficiency. [R307-401-8]

II.B.2.c The owner/operator shall not use any chemicals with any HAPs in the printing presses and associated operations in the plant. [R307-401-8] II.B.2.c.1 The owner/operator shall use the most recent version of the SDS' to demonstrate compliance with the HAP requirement above. [R307-401-8]
II.B.3 NEW RTO Requirements
II.B.3.a NEW The owner/operator shall route all emissions from the floor sweeps, Uteco 8 Press, and Uteco 8XS Press to the RTO before being vented to the atmosphere. [R307-401-8]
II.B.3.b At all times while operating, the owner/operator shall maintain a temperature at or above 1,500 degrees Fahrenheit in the RTO. [R307-401-8] II.B.3.c The owner/operator shall install, calibrate, maintain, and operate a device to monitor the operating temperature of the RTO. [R307-401-8]

II.B.3.c.1 The monitoring device shall be located such that an inspector/operator can safely read the output at any time. The operating temperature of the RTO shall be recorded on a daily basis when the RTO operates. [R307-401-8]

Engineer Review N158320003: PPC Flexible Packaging- Flexographic Printing Facility September 13, 2024 Page 9
PERMIT HISTORY When issued, the approval order shall supersede (if a modification) or will be based on the
following documents: Supersedes DAQE-AN158320001-18 dated December 18, 2018
Is Derived From NOI dated April 30, 2021 Incorporates Additional information dated June 3, 2021 Incorporates Additional Information dated April 25, 2023 Incorporates Additional Information dated May 16, 2023 Incorporates Additional Information dated May 19, 2023
REVIEWER COMMENTS 1. Comment regarding Emission estimates: The VOC emissions from the use of flexographic printing in two separate devices is on a mass balance basis. Each printing material and solvent used is represented and tabulated based on current material flow through the process times an increase of 10% in the amounts used per year. The RTO uses the VOC containing gasses from the whole printing process. The RTO captures 95% of the emissions from the floor sweeping areas, the Uteco 8 press, and the Uteco 8XS press, and has a control efficiency of 98%. Natural gas is used to keep the temperature up to at least 1500 F and it is
the use of natural gas that is estimated to represent the emissions from the RTO. AP-42 section 1.4 is used to estimate emissions of the criteria pollutants from this process. [Last updated March 5, 2024] 2. Comment regarding NSPS and MACT Review: This plant has no applicability to NSPS standard 40 CFR 60, or to MACT standard 40 CFR 63. 40 CFR 63 Subpart KK applies to flexographic printing plants that are a major source of HAP emissions; with above 10 tpy for a single HAP and above 25 tpy for combined HAPs. Area sources of HAPs do not qualify for regulation under 63 Subpart KK. [Last updated May 5, 2021]
3. Comment regarding Title V Requirements: Title V of the 1990 Clean Air Act (Title V) applies to the following:
1. Any major source
2. Any source subject to a standard, limitation, or other requirement under Section 111 of the Act, Standards of Performance for New Stationary Sources; 3. Any source subject to a standard or other requirement under Section 112 of the Act, Hazardous Air Pollutants. 4. Any Title IV affected source. This facility is not a major source and is not a Title IV source. The facility is not subject to 40 CFR 60 (NSPS), 40 CFR 61 (NESHAP), or 40 CFR 63 (MACT) regulations. There are no other reasons
why this source would be required to obtain a part 70 permit; therefore, Title V does not apply to this facility. [Last updated May 5, 2021]

Engineer Review N158320003: PPC Flexible Packaging- Flexographic Printing Facility September 13, 2024 Page 10
ACRONYMS The following lists commonly used acronyms and associated translations as they apply to this document:
40 CFR Title 40 of the Code of Federal Regulations AO Approval Order BACT Best Available Control Technology
CAA Clean Air Act CAAA Clean Air Act Amendments CDS Classification Data System (used by EPA to classify sources by size/type) CEM Continuous emissions monitor CEMS Continuous emissions monitoring system CFR Code of Federal Regulations CMS Continuous monitoring system CO Carbon monoxide CO2 Carbon Dioxide CO2e Carbon Dioxide Equivalent - 40 CFR Part 98, Subpart A, Table A-1 COM Continuous opacity monitor
DAQ/UDAQ Division of Air Quality DAQE This is a document tracking code for internal UDAQ use EPA Environmental Protection Agency
FDCP Fugitive dust control plan GHG Greenhouse Gas(es) - 40 CFR 52.21 (b)(49)(i) GWP Global Warming Potential - 40 CFR Part 86.1818-12(a)
HAP or HAPs Hazardous air pollutant(s) ITA Intent to Approve LB/HR Pounds per hour
LB/YR Pounds per year MACT Maximum Achievable Control Technology MMBTU Million British Thermal Units
NAA Nonattainment Area NAAQS National Ambient Air Quality Standards NESHAP National Emission Standards for Hazardous Air Pollutants NOI Notice of Intent NOx Oxides of nitrogen NSPS New Source Performance Standard NSR New Source Review PM10 Particulate matter less than 10 microns in size
PM2.5 Particulate matter less than 2.5 microns in size PSD Prevention of Significant Deterioration PTE Potential to Emit
R307 Rules Series 307 R307-401 Rules Series 307 - Section 401 SO2 Sulfur dioxide
Title IV Title IV of the Clean Air Act Title V Title V of the Clean Air Act TPY Tons per year
UAC Utah Administrative Code VOC Volatile organic compounds
Page 1 of 1
Company___________________________
Site _____________________________
Form 5
Emissions Information
Criteria/GHGs/ HAP’s
Utah Division of Air Quality
New Source Review Section
Potential to Emit* Criteria Pollutants & GHGs
Criteria Pollutants Permitted Emissions
(tons/yr)
Emissions Increases
(tons/yr)
Proposed Emissions
(tons/yr)
PM10 Total
PM10 Fugitive
PM2.5
NOx
SO2
CO
VOC
VOC Fugitive
NH3
Greenhouse Gases CO2e CO2e CO2e
CO2
CH4
N2O
HFCs
PFCs
SF6
Total CO2e
*Potential to emit to include pollution control equipment as defined by R307-401-2.
Hazardous Air Pollutants** (**Defined in Section 112(b) of the Clean Air Act )
Hazardous Air
Pollutant***
Permitted Emissions
(tons/yr)
Emission Increase
(tons/yr)
Proposed
Emission (tons/yr)
Emission Increase
(lbs/hr)
Total HAP
*** Use additional sheets for pollutants if needed
Equipment list
Uteco printing press 1 VOC exhaust into RTO
Uteco printing press 2 VOC exhaust into RTO
Uteco printer/laminator VOC exhaust into RTO
Nordmeccanica laminator
Mark Andy printing press
Nilpeter printing press
HP25000 digital press
HP4500 digital press
Rotoflex finisher
Universal slitter
Ashe slitter
IMS slitter
CEI slitter
Clean Planet Solvent Recovery System

1 of 1
Form 2 Date ____________
Company Information/Notice of Intent (NOI)
Utah Division of Air Quality
New Source Review Section
Application for: □ Initial Approval Order □Approval Order Modification
General Owner and Source Information
1.Company name and mailing address:
____________________________
____________________________
____________________________
Phone No.: ( )
Fax No.: ( )
2.Company** contact for environmental matters:
____________________________
Phone no.: ( )
Email: _______________________
** Company contact only; consultant or independent contractor contact information can be provided in a cover letter
3.Source name and physical address (if different from
above):____________________________
____________________________
____________________________
Phone no.: ( )
Fax no.: ( )
4.Source Property Universal Transverse Mercator
coordinates (UTM), including System and Datum:
UTM:_________________________
X:____________________________
Y:____________________________
5.The Source is located in:__________________ County 6.Standard Industrial Classification Code (SIC)
__ __ __ __
7.If request for modification, AO# to be modified: DAQE #__________________ DATED: ____/____/____
8.Brief (50 words or less) description of process.
Electronic NOI
9.A complete and accurate electronic NOI submitted to DAQ Permitting Mangers Jon Black ([e-mail]) or Alan
Humpherys ([e-mail]) can expedite review process. Please mark application type.
Hard Copy Submittal Electronic Copy Submittal □ Both
Authorization/Signature
I hereby certify that the information and data submitted in and with this application is completely true, accurate and
complete, based on reasonable inquiry made by me and to the best of my knowledge and belief.
Signature: Title:
_______________________________________
Name (Type or print)
Telephone Number:
( )
Email:
Date:
DAO 2018 002272
Page 1 of 1
Form 3 Company____________________
Process Information Site________________________
Utah Division of Air Quality
New Source Review Section
Process Information - For New Permit ONLY
1.Name of process:2.End product of this process:
3.Process Description*:
Operating Data
4.Maximum operating schedule:
__________ hrs/day
__________days/week
__________weeks/year
5.Percent annual production by quarter:
Winter ________ Spring _______
Summer ________ Fall _______
6.Maximum Hourly production (indicate units.):
_____________
7.Maximum annual production (indicate units):
________________
8.Type of operation:
Continuous Batch Intermittent
9.If batch, indicate minutes per cycle ________
Minutes between cycles ________
10. Materials and quantities used in process.*
Material Maximum Annual Quantity (indicate units)
11.Process-Emitting Units with pollution control equipment*
Emitting Unit(s) Capacity(s) Manufacture Date(s)
*If additional space is required, please create a spreadsheet or Word processing document and attach to form.
Docuitiunl Dale;: 02/28,;2018
DAQ 2018
II002273
Page 1 of 1
Form 4 Company____________________________
Project Information Site ______________________________

Utah Division of Air Quality
New Source Review Section
Process Data - For Modification/Amendment ONLY
1. Permit Number_______________________________
If submitting a new permit, then use Form 3
Requested Changes
2. Name of process to be modified/added:
_______________________________

End product of this process:

_______________________________

3. Permit Change Type: New Increase*
Equipment
Process

Condition Change ____________________
Other ______________________________
Other ______________________________

Other ______________________________

4. Does new emission unit affect existing
permitted process limits?

Yes No
5. Condition(s) Changing:

6. Description of Permit/Process Change**

7. New or modified materials and quantities used in process. **
Material Quantity Annually

8. New or modified process emitting units **
Emitting Unit(s) Capacity(s) Manufacture Date(s)

*If the permit being modified does not include CO2e or PM2.5, the emissions need to be calculated and submitted to DAQ, which may result in an
emissions increase and a public comment period.
**If additional space is required, please generate a document to accommodate and attach to form.

Doc.uim:i'ii D^lc: 02/28/2018
DAQ 2018-002274
Page 1 of 1
Company___________________________
Site _____________________________
Form 5
Emissions Information
Criteria/GHGs/ HAP’s
Utah Division of Air Quality
New Source Review Section
Potential to Emit* Criteria Pollutants & GHGs
Criteria Pollutants Permitted Emissions
(tons/yr)
Emissions Increases
(tons/yr)
Proposed Emissions
(tons/yr)
PM10 Total
PM10 Fugitive
PM2.5
NOx
SO2
CO
VOC
VOC Fugitive
NH3
Greenhouse Gases CO2e CO2e CO2e
CO2
CH4
N2O
HFCs
PFCs
SF6
Total CO2e
*Potential to emit to include pollution control equipment as defined by R307-401-2.
Hazardous Air Pollutants** (**Defined in Section 112(b) of the Clean Air Act )
Hazardous Air
Pollutant***
Permitted Emissions
(tons/yr)
Emission Increase
(tons/yr)
Proposed
Emission (tons/yr)
Emission Increase
(lbs/hr)
Total HAP
*** Use additional sheets for pollutants if needed
Jccumonl Dcjlc: 02/28/2018

RMEC ENVIRONMENTAL, INC. | 785 N. 400 WEST, SALT LAKE CITY, UTAH 84103
TEL: [phone] | www.rmec.net | FAX: [phone]

RMEC PP21E-4082

April 29, 2021

Bryce Bird
Director
Utah Division of Air Quality
195 North 1950 West
P.O. Box 144820
Salt Lake City, Utah 84114-4820
SUBJECT: AIR PERMIT MODIFICATION REQUEST
Re: Target Labels and Packaging, LLC
UDAQ Approval Order: DAQE-AN158320001-18
95 South River Bend Way
North Salt Lake, UT 84054
Dear Mr. Bird:
On behalf of Target Labels and Packaging, LLC (Target Labels), RMEC Environmental, Inc.
(RMEC) is hereby providing you with the following request for modification of the above-
referenced Approval Order (AO) with the Utah Division of Air Quality (UDAQ). The primary
purpose of this AO modification is to allow the addition of a color printer and a printer/laminator
to the existing printing operations at the site. Additionally, there are couple of administrative
discrepancies in the AO that Target Labels would like addressed as part of the modification.
MODIFICATION DETAILS
New Equipment
Target Labels intends to add the following equipment to the permitted printing processes
currently in operation at the site:
§ One (1) Uteco Onyx XS 8 Color Printer with two (2) burners and a single corona treater
attached. This unit will be connected to the Regenerative Thermal Oxidizer (RTO)
system and will result in a total increase of 156,420 pounds of ink usage and 148,500
pounds of solvent usage. Total increase of volatile organic compounds (VOC) are
summarized in Table 1 on the following page.
§ One (1) Uteco Mistral MV Printer/Laminator with an attached single burner and corona
treater. This unit will primarily run water-based products, which would foul-up and
damage the RTO. As such, emissions from the unit will not be controlled by the RTO
when running water-based inks; however, it will be connected to the RTO so that
standard inks projects need to be ran, if needed. Operation of this unit will result in an
increase of 2,000 pounds of water-based ink usage. Cleaning of the unit after water-based
projects uses water and will not require any solvent usage for cleanup. Total increase of
VOC emissions are also summarized in Table 1.

Mr. Bird/UDAQ RMEC PJ21E-4082
Page 2 of 3 April 29, 2021

RMEC ENVIRONMENTAL, INC. | 785 N. 400 WEST, SALT LAKE CITY, UTAH 84103
TEL: [phone] | www.rmec.net | FAX: [phone]

Table 1: Summary of Increased VOC Emissions;
Target Labels and Packaging, LLC – 95 S. Riverbend Way, North Salt Lake, Utah 84054
Source
Description
Product
Usage
VOC
Content1 RTO
Collection
Efficiency
Post-RTO
Control
Emissions2
Uncontrolled
Emissions
Total VOC
Emissions
(Controlled and
Uncontrolled)
(pounds) (pounds) (pounds) (pounds) (pounds) (tons)
Ink Usage
Current Ink Usage
(Permitted Limit) 173,800 113,002 95% 2,147 5,650 7,797 3.90
Uteco Onyx XS 8
Color Printer 156,420 101,673 95% 1,932 5,085 7,017 3.51
Uteco Mistral MV
Printer/Laminator 2,000 90 0% 0 90 90 0.05
Ink Usage Emission Subtotal: 14,904 7.46
Solvent Usage
Current Solvent
Usage
(Permitted Limit)
165,000 165,000 95% 3,135 8,250 11,385 5.69
Uteco Onyx XS 8
Color Printer 148,500 148,500 95% 2,822 7,425 10,247 5.12
Uteco Mistral MV
Printer/Laminator 0 0 n/a n/a 0 0 0
Solvent Usage Emission Subtotal: 21,632 10.82
Estimated Sitewide Emission Total: 36,536 18.27
Current AO Limit: 19,360 9.68
Net Increase in Emissions: 17,176 8.59
1 Average VOC content of 65% was used for standard ink products and 100% was used for all
solvent usage (as per 2017 NOI). Water-based inks, used on the printer/laminator process, have an
average VOC content of 4.5%
2 Control efficiency of 98% was applied for the RTO unit (as per 2017 NOI).
Administrative Modifications
Target feels that the following administrative modifications should be made to address some
discrepancies in the AO:
§ The abstract section of the AO states that all operations at the plant will be controlled by
the RTO; however, the RTO is currently only used to control emissions from the existing
Uteco color presses/printer along with the floor sweeps. The new equipment associated
with this modification will be connected to the RTO; however, other units, such as the
simplex press and digital printer, were never intended to be connected to the RTO.
§ Provision II.B.1.d of the subject AO, stipulates that “the owner/operator shall not use any
chemicals with any HAPs in the printing presses and associated operations in the plant.
[R307-401-8]”. We feel that the inclusion of this provision may have been an error as the
permit does allow for 0.03 tons of HAP emissions. In reviewing documentation submitted
as part of the Notice of Intent (NOI) back in 2017, it appears that some HAP emissions
Mr. Bird/UDAQ RMEC PJ21E-4082
Page 3 of 3 April 29, 2021

RMEC ENVIRONMENTAL, INC. | 785 N. 400 WEST, SALT LAKE CITY, UTAH 84103
TEL: [phone] | www.rmec.net | FAX: [phone]

were anticipated due to the use of ink products containing low levels of glycol ether
compounds.
BACT ANALYSIS
Uteco Onyx XS 8 Color Printer
All VOC/HAP emissions from this printer will be routed to the RTO, which meets the currently-
accepted BACT requirements.
Uteco Mistral MV Printer/Laminator
Emissions from water-based inks on the printer/laminator will not be routed to the RTO. This unit
will primarily use water-based ink and adhesives products, which are not compatible with the
RTO. Treatment of water-based product emissions will foul-up and ruin the RTO, which makes
the use of such control technology “technically unfeasible”. Furthermore, the quantity of water-
based VOC emissions are minimal (less than 100-lbs) and would not meet the BACT cost
effectiveness thresholds.
If standard inks are run on this unit, all VOC/HAP emissions from this printer will be routed to
the RTO, which meets the currently-accepted BACT requirements.
CLOSING
Thank you for your prompt attention to this request. If you have any questions or need additional
information, please contact me at 801.467.3661 or by email at [e-mail].
Sincerely,

Daryl Hancock, CEM, CHMM
Principal Scientist, President
RMEC ENVIRONMENTAL, INC.

Cc: Skyler Jenks, Target Labels (electronic copy)
Matt Kasica, Target Labels (electronic copy)

PROPOSAL FOR TARGET LABELS

Solvent Recycler ISTpure SR180V/Nitro
September 15th, 2020

Proposal # S2020-PPCTS-TL01rev1

Proposal prepared for:

Target Labels & Packaging
95 S River Bend Way, Ste D North Salt Lake, UT 84054 Contact: Skyler Jenks
Telephone: [phone]
[e-mail]

Proposal # S2020-PPCTS-TL01rev1

2 of 13
USA Distribution with Demo, Service & Training Center, by:

PPC Technologies & Solutions LLC
1092 Riverway Ct.
Pewaukee, WI 53072
Tel [phone]
Fax [phone]
www.ppcts.com
Contact: Richard I McDonald / President
Email: [e-mail]

IST manufacturing head office located at:

4160 Boul. Industriel
Laval (Québec) H7L 6H1

Canada’s largest manufacturer and supplier of solvent recyclers, paint gun washing machines, air-
powered abrasive blasting machines, custom engineered automated surface preparation systems and
surface finishing equipment.

o Leader in the conception and fabrication of surface treatment equipment since 1978
o Most extensive equipment and parts inventory in Canada
o Custom build design and Mechanical Engineering expertise
o Installation, Maintenance and on the road service teams
o Complete Technical Manual - English &French
o Quality Control Management
o Web Site : www.istsurface.com
o Head Office - Laval, Province of Quebec, Canada.

In order to respond to all your surface treatment needs, IST is offering to the commercial and
industrial markets the following services:

o Technical expertise in solvent recycling and exclusive distribution of the best air-powered abrasive
suppliers available around the world.
o Conception and execution of the mechanical, structural, electrical and automation engineering of
all surface preparation and surface finishing equipment.
o Design and fabrication of custom made solvent recyclers and air-powered abrasive equipment.
o Inspection, Repair and Certification of solvent recyclers and air-powered abrasive equipment.
o Emergency technical services 24 / 24 hrs.
oo Training Seminars on solvent recycling, air-powered abrasive practices and products.

Proposal # S2020-PPCTS-TL01rev1

3 of 13

Solvent Recycler Model ISTpure SR180V-Nitro – General Specifications
Our standard system design uses heat transfer fluid (thermal oil) that is electrically heated. The
heated oil is circulated through the jacketed vessel at precisely controlled temperatures to optimize
the heat transfer for the solvent/s in question. At the end of the batch the unit will automatically cool
down for 1 hour, after which time the operator can define a sludge temperature that is safer for the
dump process.
This system also provides the benefit of a self-contained heating system and is therefore easy to
install and certify as explosion-proof.

1.0 Scope of Supply
1.1 Components
This proposal covers the standard specifications and terms of sale for the purchase of one
Model SR-180V-Nitro Solvent Recovery System and options supplied by: IST, 4160 Boul.
Industriel, Laval, QC H7L 6H1 as summarized below and described herein.
• (1) 48-Gallon / 180 Liters (working volume) Distillation Vessel.
• Vacuum System
• IST Microprocessor Control and Software written and supported by IST.
• Thermal Oil heating system
• Condenser with 1HP motor and fan
• Integrated clean solvent accumulation tank
• Dirty solvent loading pump
• Clean Solvent transfer Pump.
2.0 Model SR-180V-Nitro Solvent Recovery System Specifications
2.1 Distillation Vessel
• Working volume: 48-gallons / 180 liters
• Overall volume: 67-gallons / 268 liters
• Wetted Construction: 304 Stainless Steel
• Vessel Insulation: 4” on side wall and bottom
• Typical distillation rate: 10 – 15 gallons / 40 – 60 liters per hour or more.

Proposal # S2020-PPCTS-TL01rev1

4 of 13

2.2 Electric Resistance Heater
• Three 5 kW, explosion-proof heater for a total of 15kW
o Temperature range: 100°F - 435°F / 40°C - 224°C.

2.3 Vacuum System
• Vacuum is used to reduce boiling point temperatures, and therefore reduce the
amount of heat energy needed for operation.
• Vacuum is provided by an air vacuum generator using compressed air. The
vacuum generator has a no mechanical moving part for long service life.
• A vacuum gauge is also provided for fast visual inspection of the vacuum status.

2.4 Auto Cool-down
When the heating cycle is completed, the unit will automatically go into a cool down mode
for 1 hour as indicated by the PLC display. At the end of the cool down period the PLC will
indicate: –END- . At this time the operator can dump the sludge from the distillation vessel
in lower and safer temperature conditions.

2.5 Standard Sludge Discharge
The standard sludge discharge is manually done by the operator. Upon completion of the
process, the operator will open the cover of the distillation vessel and remove the plastic
bag to discharge the sludge contents. Depending on the size of the distillation vessel, it will
take multiple batches before filling up a drum of sludge.

2.6 Control Panel
Control hardware is mounted on left side of cabinet for operator convenience. Electrical
components are CSA/UL approved. The unit is CSA certified for Canada and USA as per
UL2208 standard. The electrical design is in accordance with the National Electrical Code
(NFPA 70) for explosion proof installation in a Class 1, Division 1, Group D environment.
Controls consist of:
• IST PLC controller
• RTD (Resistance Thermal Devices) in the oil, sludge and reclaimed solvent areas
for continuous process monitoring by the PLC
• High-level float switch

2.7 Software
The control software is written and supported by IST Industry in Laval, QC.
The software monitors the process conditions according to the parameters specified by the
operator. Security levels are provided so that only authorized personnel can make changes
to the system parameters. The software also provides continuous information on the status
of the operation and diagnostics for quickly pinpointing process conditions.

Proposal # S2020-PPCTS-TL01rev1

5 of 13

Software Features Include:
• Self-diagnosis of Process Faults
• Automatic System Operation
o Fill cycles are controlled automatically (OPTION)
• Maintenance Schedule
• Elapsed Timers for:
o Thermal Oil Condition
• Faults / Alarm
• Programmable Operating Parameters
• Fill Time Limits (OPTION with auto fill)
• Oil Temperature Ramp Time
• Batch Mode Cook Timer
• Auto Cool-down for 1 hour
2.8 Nitrocellulose Protection System (monitors residues temperature in the boiler)
• System is controlled by IST PLC
• Red light alarm for signal with audible alarm
• Water quench system
• Water pressure sensor
• Water pressure gauge
• Automatic shut off if residues reach more than 135 C
2.9 Utility Requirements
3.0 Electrical Utility
460 VAC three-phases, 60 Hz, 20.8 A.

3.1 Compressed Air Utility
Air should be provided at 90 PSI, clean, dry and un-oiled with a minimum ½” line. Air
consumption is dependent on the operation in progress. Air is used to purge the control
cabinet, operate the pneumatically controlled ball valves and create vacuum.

3.2 Responsibilities
Utilities shall be brought to the control cabinet as the responsibility of the customer. Final
connections shall be made according to drawings provided by IST and PPCTS.

4.0 Area Requirements
A standard system layout would require a space of approximately 44” Deep x 73” Wide x 80” High.

5.0 Price of the unit
Price for one (1) for SR180V-Nitro with vacuum tank, as described: $ 48,500.00 Price includes delivery to customers dock (UT), mesh grill cover and auto fill.
Included option(s): 6.1 & 6.2 outlined below.

Proposal # S2020-PPCTS-TL01rev1

6 of 13

6.0 Options

6.1 Auto Fill SYSTEM (part number 306055)
Use the dirty solvent pump to draw the dirty solvent into the vessel. The process is
controlled by a high-level switch inside the distillation vessel and is backed by fill sequence
timers in the software. INCLUDED
6.2 Anti-foam device (part number 324023)
Anti-Foam device INCLUDED

7.0 Terms and Conditions

7.1 General Terms
The purchaser's order, when accepted will constitute a bona fide agreement between us; subject to all terms and conditions to follow and it is expressly agreed that there are no promises, agreements or understandings not specified
in this proposal.
PRICES – Prices quoted are for immediate acceptance and unless otherwise specified
by us, are subject to change without notice.
DELIVERY – Delivery promises are contingent upon fires, strikes, accidents, or other
causes beyond our control. We will endeavor to maintain shipping promises, but
cannot guarantee to do so.
WARRANTY – Material and workmanship are guaranteed for two year from date of
invoice or as provided by the individual component manufacturer. We will, at our
option, repair or replace any article proving defective when used for the purpose
intended; but no claims, damage, labor, or freight will be allowed. Warranties are void if
parts or assemblies, as provided by IST Industry, are altered.
CANCELLATIONS – Orders accepted by us may not be cancelled or shipment
deferred without our consent in writing and only then under terms that will indemnify us
against all loss.
TAXES – Prices quoted are subject to any and all Federal, State or Municipal Taxes,
which may be in effect or which may be imposed, prior to actual shipment of
equipment.
PATENTS – Any article furnished to your specifications in this proposal, which may be
covered by a patent, is your responsibility. You agree to hold us harmless from all legal
action, court cost and other expenses for infringement on such patents.
MISCELLANEOUS – Stenographic or clerical errors are subject to correction. Open
account billing and terms of payment are subject to approval by our Credit Department.
CLAIMS - Shortages must be made within 24 hours after receipt of material. Material
lost or damaged in transit will be the responsibility of the carrier.

Proposal # S2020-PPCTS-TL01rev1

7 of 13

THE TERMS AND CONDITIONS OF THIS WARRANTY SHALL TAKE PRECEDENCE
OVER ANY PURPORTED WARRANTY TERMS SET FORTH IN BUYER’S
PURCHASE ORDER AND CAN BE MODIFIED BY ECO INDUSTRY EXECUTING A
"MODIFICATION OF STANDARD WARRANTY AGREEMENT” SIGNED BY AN
OFFICER OF THE CORPORATION.

7.2 F.O.B.
Delivered to customer dock, North Salt Lake, UT 84054
7.3 Pricing
Proposal and information contained herein is valid for a period of 30 days.
7.4 Payment Terms
40% down payment with purchase order
50% prior to shipment, and
10% NET 30 days following shipment of the equipment (with approved credit)

8.0 Delivery
4 - 5 weeks from receipt of your purchase order and deposit, depending on order backlog at the
time of order placement, subject to prior sale.

9.0 Installation (optional)
9.1 Responsibilities
Customer
✓ Routing of Air, Electrical, and Water Utilities to the designated drop
points prior to receipt of the system.
✓ Receipt, placement, and connection of system components per
installation drawings supplied by IST and PPCTS.
✓ All piping and insulation, as required, for connection to fixed tanks or
water utility.
✓ Provide ladders and forklift equipment as needed.
✓ Lagging of equipment to the floor.
✓ Providing any protective barriers to guard against damage from any
other source such as forklift equipment.
✓ Proper grounding and certification to meet local codes.
PPCTS
✓ Training of the main operator on the use of the system.
✓ Training of maintenance personnel covering general knowledge of the
system and preventative maintenance procedures.

Proposal # S2020-PPCTS-TL01rev1

8 of 13

9.2 Installation Time-Line example
9.2.1 Customer
Day 1: Final placement of components
Connection of system components

Day 2: Installation of feed and return piping
9.2.2 PPCTS
Day 3: Commissioning of system
• Training on the use of the system
• 1 Day Labor on-site Not included
Additional labor days are billed at $1,000.00 per day per man. Note: The above time-line is
intended as a guide only. The time-line may change according to the work conditions, availability
of utilities, or at the discretion of the Field Service Installer.
9.3 Travel and Living Expenses are invoiced
Price: Not included

10.0 Transportation
10.1 Price: INCLUDED
10.2 Approximate Shipping Weight: 455 Kg / 1000 lbs.

I look forward to reviewing this quote at your convenience. If you have any questions or need more
details, please do not hesitate to contact me.

Yours truly,

Richard I McDonald
President PPC Technologies & Solutions LLC
Tel: [phone], Cel: 262-617-9078
[e-mail]
www.ppcts.com

Proposal # S2020-PPCTS-TL01rev1

9 of 13
Standard Terms and Conditions of Sale

The following conditions shall be deemed a part of every purchase order accepted by PPC Technologies & Solutions LLC ("PPCTS")
1. Definition:
As used herein, the term “Buyer” shall mean the purchaser of the goods identified on PPCTS’s “Quotation”, “Purchase Contract” or written
“Purchase and Security Agreement”; the term “Goods” shall mean all equipment, accessories and any labor and services identified on
PPCTS’s Quotation, Purchase Contract or Order Acknowledgement, and all attachments, exhibits and amendments to it; the term “Order”
shall mean the terms and conditions described in PPCTS’s Purchase Contract and Purchase and Security Agreement, and all attachments, exhibits, and amendments to them, and these Conditions of Sale.
2. Quotation:
The terms of PPCTS’s Quotation, except for these Conditions of Sale, are not binding, do not constitute an offer and are subject to change
without notice. 3. Acceptance:
PPCTS's acceptance of Buyer's purchase order is expressly made conditional on Buyer's acceptance of the terms and conditions set forth in
the Order, which are in lieu of any additional or different terms contained in Buyer's purchase order or other document or communication
pertaining to Buyer's order or the Goods, which additional or different terms shall be deemed ineffective. Buyer's assent to the terms and
conditions contained in the Order shall be conclusively presumed from receipt of PPCTS's Order Confirmation without prompt objection
thereto, from acceptance by Buyer of all or any part of the Goods or from payment by Buyer for all or any part of the Goods. The Order shall
not be binding upon PPCTS unless confirmed in writing by an authorized officer of PPCTS.
4. Delay or Cancellation:
The Order is not subject to delay or cancellation by Buyer unless Buyer gives written notice to PPCTS and such notice is acknowledged in
writing by an authorized officer of PPCTS. Upon such cancellation or delay, PPCTS may demand payment based on the purchase price
and the percentage of completion as determined by PPCTS and payment covering PPCTS's increased costs, including storage and
insurance, as a result of the cancellation or delay.
5. Taxes:
Unless otherwise expressly provided in the Order, prices quoted do not include taxes, license fees or other assessments with respect to the
Goods or Services and Buyer shall pay any and all use, sales, privilege, income tax or other taxes or license fees or assessments imposed
by foreign, federal, state or local governments.
6. Shipment Terms:
Unless otherwise expressly provided in the Order, all shipments are Ex-Works, Pewaukee, WI 53072, USA (Incoterms 2000), and all
storage, shipping, insurance, special packing or crating, and other incidental costs with respect to the Goods shall be for the account of or
paid directly by Buyer.
7. Shipment Date:
Any shipment date for the Goods acknowledged by PPCTS is a desired and not a promised date. PPCTS will make all reasonable efforts to
meet the shipment schedule set forth in the Order but shall not be liable for failure to do so.

Acknowledged shipment dates are conditional on PPCTS receiving all required payments and technical and commercial information promptly in accordance with the terms set out in the Order. PPCTS shall not be liable for any damage to or loss of the Goods or any delay in or failure
to ship, deliver, service, repair or replace the Goods arising from shortage of raw materials, failure of suppliers to make timely delivery, failure
of suppliers of Buyer-specified components to make timely delivery and provide timely technical assistance, labor disputes of any kind, fire,
windstorm, flood, theft, war, embargoes, governmental acts or rulings, loss or damage or delays in carriage, acts of God, or any other
circumstances beyond PPCTS's control.
8. Installation:
Unless otherwise expressly provided in the Order, the Goods are sold for installation and interconnection by Buyer; Buyer will supply all
necessary labor, material, and permits to properly install the Goods in accordance with PPCTS's specific instructions; and PPCTS will not be
responsible for moving any machinery, for pipe fitting, electrical work, or any other labor. PPCTS recommends that it or one of its authorized
representatives supervise Buyer's installation and start-up of the Goods. If Buyer requests PPCTS's supervision of the installation and start-
up, Buyer shall promptly pay PPCTS for such services at PPCTS's then current rates. If Buyer installs and starts up the Goods without
PPCTS's supervision, Buyer shall have the sole responsibility for all installation procedures. Compliance with any and all local, state and
federal requirements is the responsibility of Buyer.
9. Warranty:
During the warranty period, PPCTS will repair or replace at its facility in Pewaukee, WI, USA, any part of the Goods, which part has been
manufactured by PPCTS, and which PPCTS determines to have failed because of defective design, material or workmanship under normal
use and service. PPCTS shall have no warranty or other liability for any part not manufactured by it, but agrees to cooperate with Buyer in
obtaining an assignment of PPCTS's warranty rights against the manufacturer. Prior to repair or replacement, PPCTS shall have the right to examine the part at its option either at Buyer's plant or at PPCTS's facility in Pewaukee, WI, USA. For this warranty to apply, Buyer must
give PPCTS written notice of any warranted defect within fifteen (15) days after discovery and, in any event, not later than the date on which
this warranty expires or Buyer will be barred from any remedy. Upon PPCTS's written authorization, the Goods must be shipped to PPCTS
freight prepaid within a reasonable time thereafter. This warranty shall not apply to any of the Goods or parts thereof repaired or altered by
anyone but PPCTS or its authorized representatives, operated or installed contrary to instructions, subjected to misuse, negligence or
accident, or to the first service visit by PPCTS in the event that the Buyer elects not to use PPCTS's supervision during installation of the
Goods; provided, that PPCTS shall not be obligated to make any service visits to Buyer's plant. This warranty is not assignable and expires
upon the earlier of Buyer's transfer, sale or other disposition of the Goods, or one (1) year from the date of shipment of the Goods by
PPCTS to Buyer. PPCTS's liability under this warranty shall be limited to repairing or replacing warranted Goods or, if such Goods cannot
be repaired or replaced by PPCTS, to the return of the purchase price paid for the defective or nonconforming warranted Goods; provided,
that Buyer shall first return to PPCTS those goods for which a refund of the purchase price is to be made.
Proposal # S2020-PPCTS-TL01rev1

10 of 13
Standard Terms and Conditions of Sale

THE WARRANTIES PRINTED ABOVE ARE THE ONLY WARRANTIES APPLICABLE TO THE ORDER OR THE GOODS. ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE DISCLAIMED.
10. Limitation of Liability
PPCTS SHALL NOT BE LIABLE, WHETHER IN CONTRACT, IN TORT, UNDER ANY WARRANTY, IN NEGLIGENCE, OR OTHERWISE,
FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES OR FOR COSTS OF REMOVAL OR SHIPMENT. UNDER NO
CIRCUMSTANCES SHALL PPCTS'S LIABILITY OR BUYER'S REMEDY FOR DAMAGES AGAINST PPCTS EXCEED THE AMOUNT OF
THE PURCHASE PRICE OF GOODS SOLD FOR WHICH OR RELATING TO WHICH CLAIM IS MADE. IN THE EVENT THAT PPCTS'S
WARRANTY, IF ANY, OR ANY OTHER OBLIGATION OF PPCTS APPLICABLE TO THE GOODS FAILS OF ITS ESSENTIAL PURPOSE,
BUYER'S EXCLUSIVE REMEDY SHALL BE LIMITED TO RETURN OF OR CREDIT FOR SO MUCH OF THE PURCHASE PRICE AS IS
APPLICABLE TO THE GOODS WHICH ARE NONCONFORMING OR DEFECTIVE, PROVIDED SUCH GOODS ARE RETURNED TO
PPCTS. THE PRICE STATED FOR THE GOODS IS BASED UPON AND IN CONSIDERATION FOR LIMITING PPCTS'S LIABILITY. NO
ACTION ARISING OUT OF THE ORDER OR PERTAINING TO THE GOODS MAY BE BROUGHT BY BUYER MORE THAN FIFTEEN (15)
MONTHS AFTER THE DATE OF SHIPMENT OF THE GOODS BY PPCTS TO BUYER. BUYER'S REMEDIES AS PROVIDED HEREIN
ARE ITS SOLE AND EXCLUSIVE REMEDIES.
11. Default and Remedies:
If Buyer fails or refuses to accept delivery of the Goods, fails to pay for the Goods when due or otherwise fails to perform in accordance with
the Order, all amounts owing to PPCTS by Buyer under the Order and any other order or obligation shall at PPCTS’s option and without
notice or demand become immediately due and payable and PPCTS shall have available to it any remedy allowed by law or equity, and may
recover all damages suffered by PPCTS as a consequence from Buyer’s breach. Without limiting the foregoing, PPCTS shall have the right
in the event of a breach or default to retain the cash deposited or paid to it by Buyer and the Goods accepted by it on account of the sale
price, if any, and apply the same toward payment of its damages. If Goods ordered have been delivered to Buyer by PPCTS at the time of
default or breach, PPCTS may repossess the products as allowed by law. Any payment not received by PPCTS within ten (10) days after its
due date shall bear interest at the rate of two percent (2%) per month from its due date until paid. In the event that PPCTS resorts to an
attorney to collect amounts due under the Order, for the Goods, and/or for PPCTS’s damages, Buyer shall pay PPCTS its costs and
expenses incurred to effect collection, including without limitation all attorney’s and paralegal fees and all court costs and out-of-pocket
disbursements.
12. Security Interest:
PPCTS retains a purchase money security interest in all Goods not paid for in full, notwithstanding that the Goods have been delivered to
Buyer, and Buyer shall execute and deliver to PPCTS upon request, financing statements describing the Goods, and other documents which
may be requested by PPCTS to evidence its security interest.
13. Breach of Contract:
Breach of contract by either party shall have no effect upon the provisions governing the risk of loss of the Goods. Section 2-510 of the
Uniform Commercial Code shall have no effect on the Order and unless otherwise expressly provided in the Order, Buyer shall remain
obligated for all risk of loss to the Goods until their proper return to PPCTS pursuant to paragraph 9 of these Conditions of Sale.
14. Governing Law; Consent to Jurisdiction and Venue:
The Order is made in and it and all matters pertaining to the Goods shall be governed by the laws of the State of Wisconsin, USA. Buyer
irrevocably consents to the jurisdiction of any court located in district of Milwaukee, Wisconsin, USA. The Courts located in Milwaukee,
Wisconsin, USA shall have exclusive jurisdiction over all controversies arising out of or in connection with the Order or the Goods. The
parties agree that the United Nations Convention on Contracts for the International Sale of Goods (CISG) shall not apply to this Order or the
Goods.
15. Invalid Term:
The invalidity of any term contained in the Order shall not affect any other of its terms.
16. Non-waiver:
PPCTS's failure to enforce or declare a default or breach with respect to any particular term or condition of the Order shall not be considered
a waiver of PPCTS's right to enforce or declare a default or breach with respect to any other term or condition or, on a subsequent occasion,
with respect to that particular term or condition or, on a subsequent occasion, with respect to that particular term or condition.
17. Alteration of Terms and Parol Evidence:
The terms and conditions of the Order are in each instance intended by the parties as a final expression and a complete and exclusive
statement of the agreement of the parties respecting Buyer's purchase of the Goods from PPCTS. None of the terms and conditions
contained in the Order may be modified except by a written instrument signed by an authorized officer of PPCTS and delivered by PPCTS to
Buyer. In the event that the English text of these Conditions of Sale are translated into another language text, the English text will take
precedence in any discrepancies.
18. Payment:
Unless otherwise expressly provided in the Order, standard terms of payment to customers with approved credit are: 40% With placement of
order, 50% Prior to shipment, 10% On completion of installation and start-up or 30 days from delivery for PRODUCT shipped by PPCTS due
immediately upon receipt of invoice for equipment and upon receipt of invoice for accessories, parts, labor and service unless other terms are expressly provided in the Order. Interest will be charged at the rate of two percent (2%) per month on delinquent accounts.
19. Errors:
Stenographic and/or clerical errors in PPCTS’s Order are subject to correction by PPCTS without liability.
Proposal # S2020-PPCTS-TL01rev1

11 of 13

CSA and UL2208 Certificate of Compliance

Proposal # S2020-PPCTS-TL01rev1

12 of 13

Proposal # S2020-PPCTS-TL01rev1

13 of 13

PPC Flexible Packaging Rolling VOC Report
Toyo HP Univar
Pounds of V.O.C. Pounds of V.O.C. Pounds of V.O.C.
Jan-23 8224 0 0 5000
Feb-23 10061 0 0 12212
Mar-23 11890 0 0 13562
Apr-23 5824 0 0 4520
May-22 6317 0 0 8776
Jun-22 15167 0 0 14449
Jul-22 11744 0 0 9171
Aug-22 13525 0 0 18150
Sep-22 11080 0 0 11502
Oct-22 8456 0 0 9862
Nov-22 8157 0 0 11092
Dec-22 6207 0 0 6571
Total 116651 0 0 124867
Total Tons 58.33 0.00 0.00 62.43
12 Month Rolling VOC Amount purchased
Hazardous Waste Disposal (Pounds of VOC's)Amount of VOC's Shipped Out
Solid 22,143.75 11,888.32
Liquid - - Total Used V.O.C.
Capture 95%
After 98% Incineration
Uncaptured VOC's
VOC Emissions
Totals VOC'S
V.O.C. Pounds IN TONS
Monthly purchases Monthly purchases Toyo ink #'s % of VOC's
13,224.03 6.61 2023 15625 53%
22,272.78 11.14 2023 20943 48%
25,451.70 12.73 2023 23617 50%
10,344.03 5.17 2023 10674 55%
15,093.46 7.55 2022 13560 47%
29,616.00 14.81 2022 30863 49%
20,914.85 10.46 2022 24816 47%
31,674.52 15.84 2022 24834 54%
22,582.24 11.29 2022 25457 44%
18,317.66 9.16 2022 18060 47%
19,248.70 9.62 2022 17544 46%
12,777.55 6.39 2022 14751 42%
241,517.52
120.76
POUNDS TONS
241,517.52 120.76
11,888.32 5.94
229,629.21 114.81
218,147.75 109.07
4,592.58 2.30
11,481.46 5.74
16,074.04 8.04

Natural gas
2111
1839
1916
737
962
825
808
749
781
853
1042
1196
13.819
Hazardous waste Type Solid Liquid processed recovered
% of reclaimed
solvent
Pounds Pounds Gallons Gallons
Jan-23 6,500 0 2,220.57 1,641.00 73.90%
Feb-23 0 1,576.12 1,201.00 76.20%
Mar-23 6,000 0 1,745.23 1,335.10 76.50%
Apr-23 - 0 1,290.43 997.50 77.30%
May-22 - 0 552.63 420.00 76.00%
Jun-22 - 0 460.53 350.00 76.00%
Jul-22 4,818 0 690.79 525.00 76.00%
Aug-22 - 0 460.53 350.00 76.00%
Sep-22 - 0 460.53 350.00 76.00%
Oct-22 - 0 394.74 300.00 76.00%
Nov-22 - 0 1,315.79 1,000.00 76.00%
Dec-22 4,826 0 1,118.42 850.00 76.00%
Total 22,144 0 12,286.29 9,319.60 75.99%
percentage of VOC's 53.69%90.00%90.00%100.00%
pounds of VOC's 11,888.32 0.00 75,634.38 63,746.06
pounds
Hazradous Waste Disposal Totals
Calculated Annual pounds
of Reclaimed solvents
63,746.06
Reclaimation Statistics
Solid Hazardous
waste
Gallons
579.57
375.12
410.13
292.93
132.63
110.53
165.79
110.53
110.53
94.74
315.79
268.42
2,966.69

PPC Flexible Packaging Rolling VOC Report
TOYO
Pounds of Ink
Total 240,743.00 116,650.52 66.06%
% of VOC's Ink
Total Tons 120.37 58.33 48.45%
Pounds of VOC's
from ink
% of VOC's
(throughput)
Totals
Univar V.O.C. Pounds
Pounds of V.O.C. Monthly purchases
11,888.32 124,867.00 241,517.52 229,629.21
5.9 62.4 120.8 114.8

Pounds hazardous
waste
Annual reportable
throughput
218,147.75 4,592.58 11,481.46 16,074.04
109.07 2.30 5.74 8.04
Uncaptured VOC'sAfter 98% Incineration
Total VOC
EmissionsCapture 95%
13.81898786 9600 12.56
Available hours
Improved efficiency
Potential to Emit
17040 18.85

Hours worked
Current Potential to
Emit Natural gas usage
VOC&HAP Report by Customer
From: 1/1/2023 To: 1/31/2023
Customer :1000012401 PPC FLEXIBLE PACKAGING- NSL
Ship To : 1000012401 PPC FLEXIBLE PACKAGING- NSL
Material No.Material Description
1 M7GLABA125M5 ADD-X1410 ADDITIVE SLOW ADDITIVE
1 M7GFAKA001M5 BW-0000 DPA-106 LAM. BLACK BONDWISER
1 M7GFAKA002M5 BW-0001 BONDWISER LAM. OT YELLOW
1 M7GFAKA008M5 BW-0013 BONDWISER YS NAPH.RED
1 M7GFAKA009M5 BW-0026 DPA-106 LAM. CARBAZOLE VIOLET
1 M7GFAKA010M5 BW-0030 BONDWISER LAM.DIANISIDENE ORANGE
1 M7GFAKA011M5 BW-0033 BONDWISER RUBINE RED
1 M7GFAKA036M5 BW-0873 BONDWISER PT. 873 GOLD
1 M7GFAKA037M5 BW-0877 DPA-106 PT. 0877 C SILVER INK
1 M7GFAKA051M5 BW-X023 BONDWISER FAST LAM.LINE EXTENDER
1 M7GFBOA085DR PY2-X1022 PYROTECH HR MATTE OPV
1 M7GFCFA106M5 PY3-0000 PYROTECH DENSE BLACK
1 M7GFCFA009M5 PY3-P000 PYROTECH PROCESS BLACK
1 M7GFCFA113M5 PY3-PX PYROTECH PROCESS EXTENDER
1 M7GFCFA010M5 PY3-PX001 PYROTECH PRO. YELLOW SURFACE
1 M7GFCFA011M5 PY3-PX007 PYROTECH PRO. CYAN SURFACE
1 M7GFCFA012M5 PY3-PX033 PYROTECH PRO. MAGENTA SURFACE
1 M7GFCFA005DR PY3-X010 PYROTECH HI-HEAT OPV *MIX WELL*
1 M7GFBTA001DR RX-P001 REXTA R631 US WHITE
1 M7GFCBA100P1 VERSAFILM PT.375 C GREEN DIGITAL
1 M7GFCCA005M5 XJK-X016 DPI-182 PROCESS EXTENDER
1 M7GFCCA010M5 XJK-X023 DPI-182 PROCESS CYAN BLUE
1 M7GFCCA011M5 XJK-X024 DPI-182 PROCESS YELLOW
1 M7GFCCA012M5 XJK-X025 DPI-182 PROCESS MAGENTA (NP)
1 M7GFCCA013M5 XJK-X026 DPI-182 PROCESS BLACK1
1
Ship To Total :
1
1
Sold To Total :
1
1
1
1
1
1
1
1
1
1
1
1
1
HAPs Summary
CAS-NO Material Name
100-41-4 Ethylbenzene
111-77-3 Diethylene glycol monomethyl ether
1330-20-7 Xylene
67-56-1 Methyl alcohol
79-10-7 Acrylic acid
Grand Total
2023
ETHYL ACETATE 99%
HS 2790 IBC705|13271
ISOPROPANOL 99%
Purchased (Base
Unit)
VOC %
bv wt.VOC (LBS)
HAP %
bv wt.HAP (LBS)
Specific
Gravity
420.000 LB 0.000 0.000 0.000 0.000 1.000
280.000 LB 68.350 191.380 0.032 0.090 1.100
140.000 LB 48.722 68.211 0.032 0.045 1.100
143.000 LB 69.429 99.284 0.030 0.042 1.100
280.000 LB 74.442 208.438 0.032 0.090 1.050
70.000 LB 70.197 49.138 0.032 0.022 1.050
140.000 LB 70.347 98.486 0.032 0.045 1.050
105.000 LB 70.902 74.448 0.022 0.023 1.000
415.000 LB 55.955 232.211 0.030 0.126 1.050
420.000 LB 76.911 323.024 0.048 0.202 0.900
2,835.000 LB 65.272 1,850.450 0.000 0.000 1.050
143.000 LB 67.079 95.922 0.000 0.000 1.050
210.000 LB 59.675 125.318 0.000 0.000 1.050
210.000 LB 75.709 158.990 0.000 0.000 0.900
210.000 LB 68.748 144.370 0.000 0.000 1.050
295.000 LB 64.386 189.938 0.000 0.000 1.050
286.000 LB 65.957 188.638 0.000 0.000 1.050
2,100.000 LB 72.000 1,512.000 0.000 0.000 0.900
4,000.000 LB 33.488 1,339.520 0.000 0.000 1.500
27.000 LB 2.157 0.582 1.803 0.487 1.150
1,395.000 LB 49.082 684.697 0.000 0.000 1.000
282.000 LB 28.340 79.918 0.000 0.000 1.000
423.000 LB 73.362 310.320 0.000 0.000 1.050
420.000 LB 25.408 106.712 0.000 0.000 1.050
376.000 LB 24.479 92.039 0.000 0.000 1.050
15,625.000 8,224.033 1.171
15,625.000 8,224.033 1.171
Lbs HAPs
0.000
0.485
0.000
0.684
0.001
1.171
0
5000
Density
LB/GAL
VOC
LB/GAL
HAP
LB/GAL
8.327 0.000 0.000
9.160 6.261 0.003
9.160 4.463 0.003
9.160 6.360 0.003
8.743 6.509 0.003
8.743 6.138 0.003
8.743 6.151 0.003
8.327 5.904 0.002
8.743 4.892 0.003
7.494 5.764 0.004
8.743 5.707 0.000
8.743 5.865 0.000
8.743 5.218 0.000
7.494 5.674 0.000
8.743 6.011 0.000
8.743 5.629 0.000
8.743 5.767 0.000
7.494 5.396 0.000
12.491 4.183 0.000
9.576 0.207 0.173
8.327 4.087 0.000
8.327 2.360 0.000
8.743 6.414 0.000
8.743 2.221 0.000
8.743 2.140 0.000
Customer :
Ship To :
Material No.Material Description
2 M7GFAKA001DR BW-0000 DPA-106 LAM. BLACK BONDWISER
2 M7GFAKA001M5 BW-0000 DPA-106 LAM. BLACK BONDWISER
2 M7GFAKA002M5 BW-0001 BONDWISER LAM. OT YELLOW
2 M7GFAKA005M5 BW-0007 BONDWISER CYAN BLUE
2 M7GFAKA006M5 BW-0008 BONDWISER LAM.CYAN GREEN
2 M7GFAKA008M5 BW-0013 BONDWISER YS NAPH.RED
2 M7GFAKA009M5 BW-0026 DPA-106 LAM. CARBAZOLE VIOLET
2 M7GFAKA010M5 BW-0030 BONDWISER LAM.DIANISIDENE ORANGE
2 M7GFAKA011M5 BW-0033 BONDWISER RUBINE RED
2 M7GFAKA051M5 BW-X023 BONDWISER FAST LAM.LINE EXTENDER
2 M7GFAKA141DR BW-X1191 BONDWISER PT. 021 C ORANGE
2 M7GFANA028M5 CORE-X00038 CORE DIANIS.ORANGE BASE
2 M7GFANA031M5 CORE-X00044 CORE CARBAZOLE VIOLET BASE
2 M7GFBOA085DR PY2-X1022 PYROTECH HR MATTE OPV
2 M7GFCFA106M5 PY3-0000 PYROTECH DENSE BLACK
2 M7GFCFA107M5 PY3-0001 PYROTECH GS YELLOW
2 M7GFCFA108M5 PY3-0007 PYROTECH BLUE
2 M7GFCFA109M5 PY3-0008 PYROTECH GREEN
2 M7GFCFA110M5 PY3-0013 PYROTECH WARM RED
2 M7GFCFA111M5 PY3-0026 PYROTECH CARBAZOLE VIOLET
1000012401 PPC FLEXIBLE PACKAGING- NSL
VOC&HAP Report by Custo
From: 2/1/2023 To: 2/28/20
1000012401 PPC FLEXIBLE PACKAGING- NSL
2 M7GFCFA112M5 PY3-0033 PYROTECH RUBINE RED
2 M7GFCFA009M5 PY3-P000 PYROTECH PROCESS BLACK
2 M7GFCFA113M5 PY3-PX PYROTECH PROCESS EXTENDER
2 M7GFCFA010M5 PY3-PX001 PYROTECH PRO. YELLOW SURFACE
2 M7GFCFA011M5 PY3-PX007 PYROTECH PRO. CYAN SURFACE
2 M7GFCFA012M5 PY3-PX033 PYROTECH PRO. MAGENTA SURFACE
2 M7GFCFA005DR PY3-X010 PYROTECH HI-HEAT OPV *MIX WELL*
2 M7GFBTA001DR RX-P001 REXTA R631 US WHITE
2 M7GFCBA008P1 VF-0010 VERSAFILM POLY EXTENDER
2 M7GFCBA083P1 VF-PX08 VERSAFILM PRO. BLACK
2 M7GFCBA026P1 VF-S048 VERSAFILM HI OPAQUE WHITE
2 M7GFCBA046P1 VF-X502 VERSAFILM CARBAZOLE VIOLET BASE
2 M7GFCCA156M5 XJK T PROCESS BLACK I
2 M7GFCCA011M5 XJK-X024 DPI-182 PROCESS YELLOW
2 M7GFCCA013M5 XJK-X026 DPI-182 PROCESS BLACK
2
2
Ship To Total :
2
2
Sold To Total :
2
2
2
CAS-NO Material Name
100-41-4 Ethylbenzene
111-77-3 Diethylene glycol monomethyl ether
111-90-0 Diethylene glycol monoethyl ether
1330-20-7 Xylene
67-56-1 Methyl alcohol
75-07-0 Acetaldehyde
79-10-7 Acrylic acid
Grand Total
HAPs Summary
2023
ETHYL ACETATE 99%
HS 2790 IBC705|13271
ISOPROPANOL 99%
Purchased (Base
Unit)
VOC %
bv wt.VOC (LBS)
HAP %
bv wt.
HAP
(LBS)
Specific
Gravity
700.000 LB 68.350 478.450 0.032 0.224 1.050
283.000 LB 68.350 193.431 0.032 0.091 1.100
280.000 LB 48.722 136.422 0.032 0.090 1.100
200.000 LB 68.712 137.424 0.032 0.064 0.950
70.000 LB 69.618 48.733 0.032 0.022 1.050
280.000 LB 69.429 194.402 0.030 0.083 1.100
105.000 LB 74.442 78.164 0.032 0.034 1.050
140.000 LB 70.197 98.276 0.032 0.045 1.050
105.000 LB 70.347 73.864 0.032 0.034 1.050
560.000 LB 76.911 430.699 0.048 0.269 0.900
1,412.000 LB 51.553 727.931 0.031 0.441 1.000
70.000 LB 72.563 50.794 0.000 0.000 1.050
105.000 LB 74.200 77.910 0.000 0.000 1.050
2,100.000 LB 65.272 1,370.704 0.000 0.000 1.050
219.000 LB 67.079 146.902 0.000 0.000 1.050
76.000 LB 66.975 50.901 0.000 0.000 1.050
70.000 LB 65.595 45.916 0.000 0.000 1.050
70.000 LB 40.195 28.137 0.000 0.000 0.950
140.000 LB 66.855 93.596 0.000 0.000 1.050
70.000 LB 64.814 45.370 0.000 0.000 1.150

omer
023

76.000 LB 61.252 46.552 0.000 0.000 1.150
210.000 LB 59.675 125.318 0.000 0.000 1.050
280.000 LB 75.709 211.986 0.000 0.000 0.900
177.000 LB 68.748 121.683 0.000 0.000 1.050
140.000 LB 64.386 90.140 0.000 0.000 1.050
114.000 LB 65.957 75.191 0.000 0.000 1.050
1,400.000 LB 72.000 1,008.000 0.000 0.000 0.900
10,000.000 LB 33.488 3,348.800 0.000 0.000 1.500
54.000 LB 8.350 4.509 3.300 1.782 1.100
72.000 LB 2.388 1.720 0.056 0.040 1.150
162.000 LB 1.817 2.943 1.523 2.467 1.130
18.000 LB 2.726 0.491 1.987 0.358 1.150
140.000 LB 14.353 20.094 0.000 0.000 1.050
490.000 LB 73.362 359.473 0.000 0.000 1.050
555.000 LB 24.479 135.856 0.000 0.000 1.050
20,943.000 10,060.778 6.042
20,943.000 10,060.778 6.042
Lbs HAPs
0.004
4.564
0.024
0.004
1.395
0.000
0.052
6.042

2460
9042
710
Density
LB/GAL
VOC
LB/GAL
HAP
LB/GAL
8.743 5.976 0.003
9.160 6.261 0.003
9.160 4.463 0.003
7.911 5.436 0.003
8.743 6.087 0.003
9.160 6.360 0.003
8.743 6.509 0.003
8.743 6.138 0.003
8.743 6.151 0.003
7.494 5.764 0.004
8.327 4.293 0.003
8.743 6.344 0.000
8.743 6.488 0.000
8.743 5.707 0.000
8.743 5.865 0.000
8.743 5.856 0.000
8.743 5.735 0.000
7.911 3.180 0.000
8.743 5.845 0.000
9.576 6.207 0.000
9.576 5.866 0.000
8.743 5.218 0.000
7.494 5.674 0.000
8.743 6.011 0.000
8.743 5.629 0.000
8.743 5.767 0.000
7.494 5.396 0.000
12.491 4.183 0.000
9.160 0.765 0.302
9.576 0.229 0.005
9.410 0.171 0.143
9.576 0.261 0.190
8.743 1.255 0.000
8.743 6.414 0.000
8.743 2.140 0.000
Customer :
Ship To :
Material No.Material Description
3 M7GLABA125M5 ADD-X1410 ADDITIVE SLOW ADDITIVE
3 M7GFAKA001DR BW-0000 DPA-106 LAM. BLACK BONDWISER
3 M7GFAKA001M5 BW-0000 DPA-106 LAM. BLACK BONDWISER
3 M7GFAKA002M5 BW-0001 BONDWISER LAM. OT YELLOW
3 M7GFAKA003M5 BW-0004 BONDWISER YS RHODAMINE
3 M7GFAKA037DR BW-0877 DPA-106 PT. 0877 C SILVER INK
3 M7GFAKA051M5 BW-X023 BONDWISER FAST LAM.LINE EXTENDER
3 M7GFAKA141DR BW-X1191 BONDWISER PT. 021 C ORANGE
3 M7GFANA016M5 CORE-X00015 CORE SLOW AAOT YELLOW BASE
3 M7GCBRA002P1 PG3-0802 POWERGLOW PT.802 FLUOR.GREEN
3 M7GCBRA003P1 PG3-0803 POWERGLOW PT.803 FLUOR.YELLOW
3 M7GCBRA004P1 PG3-0804 POWERGLOW PT.804 FLUOR.ORANGE
3 M7GCBRA005P1 PG3-0805 POWERGLOW PT.805 FLUOR.RED
3 M7GCBRA006P1 PG3-0806 POWERGLOW PT.806 FLUOR.PINK
3 M7GFBOA085DR PY2-X1022 PYROTECH HR MATTE OPV
3 M7GFCFA142DR PY3 PYROTECH PT.021 ORANGE
3 M7GFCFA106M5 PY3-0000 PYROTECH DENSE BLACK
3 M7GFCFA107M5 PY3-0001 PYROTECH GS YELLOW
3 M7GFCFA110M5 PY3-0013 PYROTECH WARM RED
3 M7GFCFA111M5 PY3-0026 PYROTECH CARBAZOLE VIOLET
1000012401 PPC FLEXIBLE PACKAGING- NSL
VOC&HAP Report by Custo
From: 3/1/2023 To: 3/31/20
1000012401 PPC FLEXIBLE PACKAGING- NSL
3 M7GFCFA112M5 PY3-0033 PYROTECH RUBINE RED
3 M7GFCFA009M5 PY3-P000 PYROTECH PROCESS BLACK
3 M7GFCFA113M5 PY3-PX PYROTECH PROCESS EXTENDER
3 M7GFCFA010M5 PY3-PX001 PYROTECH PRO. YELLOW SURFACE
3 M7GFCFA011M5 PY3-PX007 PYROTECH PRO. CYAN SURFACE
3 M7GFCFA012M5 PY3-PX033 PYROTECH PRO. MAGENTA SURFACE
3 M7GFCFA005DR PY3-X010 PYROTECH HI-HEAT OPV *MIX WELL*
3 M7GFBQA028DR PYG-X001 PYROGLOSS GLOSS HR WHITE
3 M7GFBTA001DR RX-P001 REXTA R631 US WHITE
3 M7GFCCA156M5 XJK T PROCESS BLACK I
3 M7GFCCA005M5 XJK-X016 DPI-182 PROCESS EXTENDER
3 M7GFCCA010M5 XJK-X023 DPI-182 PROCESS CYAN BLUE
3 M7GFCCA011M5 XJK-X024 DPI-182 PROCESS YELLOW
3 M7GFCCA012M5 XJK-X025 DPI-182 PROCESS MAGENTA (NP)
3
3
Ship To Total :
3
3
Sold To Total :
3
3
3
3
3
CAS-NO Material Name
67-56-1 Methyl alcohol
Grand Total
HAPs Summary
2023
ETHYL ACETATE 99%
HS 2790 IBC705|13271
ISOPROPANOL 99%
Purchased (Base
Unit)
VOC %
bv wt.VOC (LBS)
HAP %
bv wt.HAP (LBS)
Specific
Gravity
140.000 LB 0.000 0.000 0.000 0.000 1.000
350.000 LB 51.821 181.372 0.032 0.112 1.050
280.000 LB 68.350 191.380 0.032 0.090 1.100
280.000 LB 48.722 136.422 0.032 0.090 1.100
105.000 LB 68.937 72.384 0.032 0.034 1.050
700.000 LB 55.955 391.682 0.030 0.213 0.950
280.000 LB 76.911 215.349 0.048 0.134 0.900
350.000 LB 51.553 180.436 0.031 0.109 1.000
70.000 LB 70.100 49.070 0.000 0.000 1.050
20.000 LB 0.000 0.000 0.002 0.000 0.950
18.000 LB 7.000 1.260 0.000 0.000 1.000
18.000 LB 0.000 0.000 0.000 0.000 1.000
18.000 LB 7.000 1.260 0.000 0.000 1.000
18.000 LB 0.000 0.000 0.000 0.000 1.000
1,400.000 LB 65.272 913.802 0.000 0.000 1.050
770.000 LB 53.787 414.160 0.000 0.000 1.050
946.000 LB 67.079 634.563 0.000 0.000 1.050
226.000 LB 66.975 151.362 0.000 0.000 1.050
175.000 LB 66.855 116.996 0.000 0.000 1.050
140.000 LB 64.814 90.739 0.000 0.000 1.150

omer
023

70.000 LB 61.252 42.876 0.000 0.000 1.150
175.000 LB 59.675 104.432 0.000 0.000 1.050
875.000 LB 75.709 662.456 0.000 0.000 0.900
140.000 LB 68.748 96.247 0.000 0.000 1.050
140.000 LB 64.386 90.140 0.000 0.000 1.050
212.000 LB 65.957 139.829 0.000 0.000 1.050
3,465.000 LB 72.000 2,494.800 0.000 0.000 0.900
2,000.000 LB 33.614 672.280 0.000 0.000 1.500
8,000.000 LB 37.029 2,962.320 0.000 0.000 1.500
420.000 LB 14.353 60.281 0.000 0.000 1.050
770.000 LB 49.082 377.933 0.000 0.000 1.000
350.000 LB 28.340 99.189 0.000 0.000 1.000
350.000 LB 73.362 256.766 0.000 0.000 1.050
346.000 LB 25.408 87.911 0.000 0.000 1.050
23,617.000 11,889.697 0.782
23,617.000 11,889.697 0.782
Lbs HAPs
0.781
0.781

13562
Density
LB/GAL
VOC
LB/GAL
HAP
LB/GAL
8.327 0.000 0.000
8.743 4.531 0.003
9.160 6.261 0.003
9.160 4.463 0.003
8.743 6.027 0.003
7.911 4.426 0.002
7.494 5.764 0.004
8.327 4.293 0.003
8.743 6.129 0.000
7.911 0.000 0.000
8.327 0.583 0.000
8.327 0.000 0.000
8.327 0.583 0.000
8.327 0.000 0.000
8.743 5.707 0.000
8.743 4.703 0.000
8.743 5.865 0.000
8.743 5.856 0.000
8.743 5.845 0.000
9.576 6.207 0.000
9.576 5.866 0.000
8.743 5.218 0.000
7.494 5.674 0.000
8.743 6.011 0.000
8.743 5.629 0.000
8.743 5.767 0.000
7.494 5.396 0.000
12.491 4.199 0.000
12.491 4.625 0.000
8.743 1.255 0.000
8.327 4.087 0.000
8.327 2.360 0.000
8.743 6.414 0.000
8.743 2.221 0.000
Customer :
Ship To :
Material No.Material Description
4 M7GLABA105P1 ADD-X1327 ADDITIVE LOW ODOR PH ADJUSTER
4 M7GLABA125M5 ADD-X1410 ADDITIVE SLOW ADDITIVE
4 M7GFAKA508M5 BW BONDWISER LINE DENSE BLACK
4 M7GFAKA001M5 BW-0000 DPA-106 LAM. BLACK BONDWISER
4 M7GFAKA005M5 BW-0007 BONDWISER CYAN BLUE
4 M7GFAKA008M5 BW-0013 BONDWISER YS NAPH.RED
4 M7GFAKA010M5 BW-0030 BONDWISER LAM.DIANISIDENE ORANGE
4 M7GFAKA051M5 BW-X023 BONDWISER FAST LAM.LINE EXTENDER
4 M7GFBOA085DR PY2-X1022 PYROTECH HR MATTE OPV
4 M7GFCFA106M5 PY3-0000 PYROTECH DENSE BLACK
4 M7GFCFA109M5 PY3-0008 PYROTECH GREEN
4 M7GFCFA005DR PY3-X010 PYROTECH HI-HEAT OPV *MIX WELL*
4 M7GFCFA005M5 PY3-X010 PYROTECH HI-HEAT OPV *MIX WELL*
4 M7GFBTA001DR RX-P001 REXTA R631 US WHITE
4 M7GFCBA014P1 VF-0021 VERSAFILM PANTONE 021 ORANGE
4 M7GFCBA081P1 VF-PX06 VERSAFILM PRO. YELLOW
4 M7GFCBA026P1 VF-S048 VERSAFILM HI OPAQUE WHITE
4 M7GFCBA046P1 VF-X502 VERSAFILM CARBAZOLE VIOLET BASE
4
VOC&HAP Report by Custo
From: 4/1/2023 To: 4/30/20
1000012401 PPC FLEXIBLE PACKAGING- NSL
1000012401 PPC FLEXIBLE PACKAGING- NSL
4 Ship To Total :
4
4 Sold To Total :
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
CAS-NO Material Name
4 100-41-4 Ethylbenzene
4 111-77-3 Diethylene glycol monomethyl ether
4 111-90-0 Diethylene glycol monoethyl ether
4 1330-20-7 Xylene
4 67-56-1 Methyl alcohol
4 79-10-7 Acrylic acid
Grand Total
HAPs Summary
2023
ETHYL ACETATE 99%
HS 2790 IBC705|13271
ISOPROPANOL 99%
Purchased (Base
Unit)
VOC %
bv wt.VOC (LBS)
HAP %
bv wt.HAP (LBS)
HAP
(LBS)
64.000 LB 0.000 0.000 0.000 0.000 1.050
140.000 LB 0.000 0.000 0.000 0.000 1.00070.000 LB 27.694 19.386 0.000 0.000 0.900
280.000 LB 68.350 191.380 0.032 0.090 1.100
140.000 LB 68.712 96.197 0.032 0.045 0.950
349.000 LB 69.429 242.308 0.030 0.103 1.100
138.000 LB 70.197 96.872 0.032 0.044 1.050
280.000 LB 76.911 215.349 0.048 0.134 0.900
1,400.000 LB 65.272 913.802 0.000 0.000 1.050
322.000 LB 67.079 215.993 0.000 0.000 1.050
70.000 LB 40.195 28.137 0.000 0.000 0.950
3,150.000 LB 72.000 2,268.000 0.000 0.000 0.900
70.000 LB 72.000 50.400 0.000 0.000 0.900
4,000.000 LB 37.029 1,481.160 0.000 0.000 1.500
18.000 LB 2.248 0.405 1.888 0.340 1.150
36.000 LB 5.059 1.821 2.091 0.753 1.150
120.000 LB 1.817 2.180 1.523 1.828 1.130
27.000 LB 2.366 0.639 1.987 0.537 1.150
omer
023

10,674.000 5,824.028 3.873
10,674.000 5,824.028 3.873
Lbs HAPs
0.002
3.390
0.020
0.002
0.416
0.042
3.873

4520
HAP
(LBS)
HAP
(LBS)
HAP
(LBS)
8.743 0.000 0.000
8.327 0.000 0.0007.494 2.075 0.000
9.160 6.261 0.003
7.911 5.436 0.003
9.160 6.360 0.003
8.743 6.138 0.003
7.494 5.764 0.004
8.743 5.707 0.000
8.743 5.865 0.000
7.911 3.180 0.000
7.494 5.396 0.000
7.494 5.396 0.000
12.491 4.625 0.000
9.576 0.215 0.181
9.576 0.484 0.200
9.410 0.171 0.143
9.576 0.227 0.190
Customer :
Ship To :
Material No.Material Description
M7GLABA125M5 ADD-X1410 ADDITIVE SLOW ADDITIVE
M7GFAKA002M5 BW-0001 BONDWISER LAM. OT YELLOW
M7GFAKA051M5 BW-X023 BONDWISER FAST LAM.LINE EXTENDER
M7GFBOA085DR PY2-X1022 PYROTECH HR MATTE OPV
M7GFCFA136DR PY3 PYROTECH PT.2747 C BLUE
M7GFCFA110M5 PY3-0013 PYROTECH WARM RED
M7GFCFA010M5 PY3-PX001 PYROTECH PRO. YELLOW SURFACE
M7GFCFA012M5 PY3-PX033 PYROTECH PRO. MAGENTA SURFACE
M7GFCFA005DR PY3-X010 PYROTECH HI-HEAT OPV *MIX WELL*
M7GFBQA013M5 PYG-00QR PYROGLOSS QUIN RED
M7GFBTA001DR RX-P001 REXTA R631 US WHITE
M7GFCCA005M5 XJK-X016 DPI-182 PROCESS EXTENDER
M7GFCCA010M5 XJK-X023 DPI-182 PROCESS CYAN BLUE
M7GFCCA011M5 XJK-X024 DPI-182 PROCESS YELLOW
M7GFCCA012M5 XJK-X025 DPI-182 PROCESS MAGENTA (NP)
M7GFCCA013M5 XJK-X026 DPI-182 PROCESS BLACK
Ship To Total :
Sold To Total :
1000012401 PPC FLEXIBLE PACKAGING- NSL
VOC&HAP Report by Custo
From: 5/1/2022 To: 5/31/20
1000012401 PPC FLEXIBLE PACKAGING- NSL
CAS-NO Material Name
67-56-1 Methyl alcohol
Grand Total
2022
ETHYL ACETATE 99%
HS 2790 IBC705|13271
ISOPROPANOL 99%
HAPs Summary
Purchased (Base
Unit)
VOC %
bv wt.VOC (LBS)
HAP %
bv wt.HAP (LBS)
Specific
Gravity
216.000 LB 0.000 0.000 0.000 0.000 1.000
210.000 LB 48.722 102.316 0.032 0.067 1.050
700.000 LB 76.911 538.374 0.048 0.336 0.900
700.000 LB 65.272 456.901 0.000 0.000 1.000
1,050.000 LB 41.526 436.020 0.000 0.000 1.000
218.000 LB 66.855 145.743 0.000 0.000 1.000
175.000 LB 68.748 120.308 0.000 0.000 1.050
140.000 LB 65.957 92.340 0.000 0.000 1.050
1,771.000 LB 72.000 1,275.120 0.000 0.000 0.900
70.000 LB 63.469 44.428 0.000 0.000 1.050
6,000.000 LB 33.488 2,009.280 0.000 0.000 1.500
700.000 LB 49.082 343.575 0.000 0.000 1.000
350.000 LB 28.340 99.189 0.000 0.000 1.000
700.000 LB 73.362 513.533 0.000 0.000 1.000
350.000 LB 25.408 88.927 0.000 0.000 1.000
210.000 LB 24.479 51.405 0.000 0.000 1.000
13,560.000 6,317.460 0.403
13,560.000 6,317.460 0.403

omer
022

Lbs HAPs
0.403
0.403
1640
6781
355

Density
LB/GAL
VOC
LB/GAL
HAP
LB/GAL
8.327 0.000 0.000
8.743 4.260 0.003
7.494 5.764 0.004
8.327 5.435 0.000
8.327 3.458 0.000
8.327 5.567 0.000
8.743 6.011 0.000
8.743 5.767 0.000
7.494 5.396 0.000
8.743 5.549 0.000
12.491 4.183 0.000
8.327 4.087 0.000
8.327 2.360 0.000
8.327 6.109 0.000
8.327 2.116 0.000
8.327 2.038 0.000
Customer :
Ship To :
Material No.Material Description
6 M7GLABA125M5 ADD-X1410 ADDITIVE SLOW ADDITIVE
6 M7GFAKA001M5 BW-0000 DPA-106 LAM. BLACK BONDWISER
6 M7GFAKA002M5 BW-0001 BONDWISER LAM. OT YELLOW
6 M7GFAKA006M5 BW-0008 BONDWISER LAM.CYAN GREEN
6 M7GFAKA008M5 BW-0013 BONDWISER YS NAPH.RED
6 M7GFAKA009M5 BW-0026 DPA-106 LAM. CARBAZOLE VIOLET
6 M7GFAKA011M5 BW-0033 BONDWISER RUBINE RED
6 M7GFAKA051M5 BW-X023 BONDWISER FAST LAM.LINE EXTENDER
6 M7GFANA018M5 CORE-X00017 CORE SLOW G/S BLUE BASE
6 M7GFANA028M5 CORE-X00038 CORE DIANIS.ORANGE BASE
6 M7GFANA029M5 CORE-X00040 CORE Y/S NAPH RED
6 M7GFANA031M5 CORE-X00044 CORE CARBAZOLE VIOLET BASE
6 M7GFBOA085DR PY2-X1022 PYROTECH HR MATTE OPV
6 M7GFCFA106M5 PY3-0000 PYROTECH DENSE BLACK
6 M7GFCFA107M5 PY3-0001 PYROTECH GS YELLOW
6 M7GFCFA108M5 PY3-0007 PYROTECH BLUE
6 M7GFCFA110M5 PY3-0013 PYROTECH WARM RED
6 M7GFCFA111M5 PY3-0026 PYROTECH CARBAZOLE VIOLET
6 M7GFCFA112M5 PY3-0033 PYROTECH RUBINE RED
6 M7GFCFA009M5 PY3-P000 PYROTECH PROCESS BLACK
1000012401 PPC FLEXIBLE PACKAGING- NSL
VOC&HAP Report by Custo
From: 6/1/2022 To: 6/30/20
1000012401 PPC FLEXIBLE PACKAGING- NSL
6 M7GFCFA113M5 PY3-PX PYROTECH PROCESS EXTENDER
6 M7GFCFA010M5 PY3-PX001 PYROTECH PRO. YELLOW SURFACE
6 M7GFCFA011M5 PY3-PX007 PYROTECH PRO. CYAN SURFACE
6 M7GFCFA012M5 PY3-PX033 PYROTECH PRO. MAGENTA SURFACE
6 M7GFCFA005DR PY3-X010 PYROTECH HI-HEAT OPV *MIX WELL*
6 M7GFBQA067M5 PYG-X058 PYROGLOSS COTTONCANDY VEND PINK
6 M7GFBTA001DR RX-P001 REXTA R631 US WHITE
6 M7GFCBA100P1 VERSAFILM PT.375 C GREEN DIGITAL
6 M7GFCBA008P1 VF-0010 VERSAFILM POLY EXTENDER
6 M7GFCBA044P1 VF-X500 VERSAFILM Y/S NAPHTHOL RED
6 M7GFCBA045P1 VF-X501 VERSAFILM RUBINE RED BASE
6 M7GFCBA047P1 VF-X503 VERSAFILM YELLOW BASE
6 M7GFCBA048P1 VF-X504 VERSAFILM GREEN BASE
6 M7GFCCA005M5 XJK-X016 DPI-182 PROCESS EXTENDER
6 M7GFCCA010M5 XJK-X023 DPI-182 PROCESS CYAN BLUE
6 M7GFCCA011M5 XJK-X024 DPI-182 PROCESS YELLOW
6 M7GFCCA012M5 XJK-X025 DPI-182 PROCESS MAGENTA (NP)
6 M7GFCCA013M5 XJK-X026 DPI-182 PROCESS BLACK6
6
Ship To Total :
6
6
Sold To Total :
CAS-NO Material Name
6 100-41-4 Ethylbenzene
6 111-77-3 Diethylene glycol monomethyl ether
6 1330-20-7 Xylene
HAPs Summary
6 140-88-5 Ethyl acrylate
6 67-56-1 Methyl alcohol
6 75-07-0 Acetaldehyde
6 79-10-7 Acrylic acid
Grand Total
2022
ETHYL ACETATE 99%
HS 2790 IBC705|13271
ISOPROPANOL 99%
Purchased (Base
Unit)
VOC %
bv wt.VOC (LBS)
HAP %
bv wt.HAP (LBS)
Specific
Gravity
280.000 LB 0.000 0.000 0.000 0.000 1.000
289.000 LB 68.350 197.532 0.032 0.092 1.050
488.000 LB 48.722 237.763 0.032 0.156 1.050
143.000 LB 69.618 99.554 0.032 0.046 1.050
280.000 LB 69.429 194.402 0.030 0.083 1.050
280.000 LB 74.442 208.438 0.032 0.090 1.050
274.000 LB 70.347 192.751 0.032 0.088 1.050
700.000 LB 76.911 538.374 0.048 0.336 0.900
70.000 LB 65.030 45.521 0.000 0.000 1.050
35.000 LB 67.125 23.494 0.000 0.000 1.050
70.000 LB 65.005 45.504 0.000 0.000 1.050
70.000 LB 74.200 51.940 0.000 0.000 1.050
2,515.000 LB 65.272 1,641.581 0.000 0.000 1.000
289.000 LB 67.079 193.857 0.000 0.000 1.050
105.000 LB 66.975 70.323 0.000 0.000 1.050
149.000 LB 65.595 97.736 0.000 0.000 1.050
215.000 LB 66.855 143.737 0.000 0.000 1.050
140.000 LB 64.814 90.739 0.000 0.000 1.150
140.000 LB 61.252 85.753 0.000 0.000 1.150
350.000 LB 59.675 208.864 0.000 0.000 1.050

omer
022

280.000 LB 75.709 211.986 0.000 0.000 0.950
277.000 LB 68.748 190.431 0.000 0.000 1.050
350.000 LB 64.386 225.350 0.000 0.000 1.050
385.000 LB 65.957 253.935 0.000 0.000 1.050
4,900.000 LB 72.000 3,528.000 0.000 0.000 0.900
70.000 LB 63.088 44.162 0.000 0.000 1.050
12,060.000 LB 33.488 4,038.653 0.000 0.000 1.500
18.000 LB 2.157 0.388 1.803 0.325 1.150
72.000 LB 8.350 6.012 3.300 2.376 1.100
27.000 LB 1.943 0.525 1.559 0.421 1.150
18.000 LB 2.238 0.403 1.856 0.334 1.150
27.000 LB 1.871 0.505 1.525 0.412 1.150
18.000 LB 2.612 0.470 1.656 0.298 1.100
1,045.000 LB 49.082 512.909 0.000 0.000 1.000
630.000 LB 28.340 178.541 0.000 0.000 1.000
1,365.000 LB 73.362 1,001.389 0.000 0.000 1.050
910.000 LB 25.408 231.210 0.000 0.000 1.050
1,529.000 LB 24.479 374.276 0.000 0.000 1.050
30,863.000 15,167.004 5.056
30,863.000 15,167.004 5.056
Lbs HAPs
0.002
4.154
0.002

0.001
0.891
0.000
0.006
5.056
1640
12809
0
Density
LB/GAL
VOC
LB/GAL
HAP
LB/GAL
8.327 0.000 0.000
8.743 5.976 0.003
8.743 4.260 0.003
8.743 6.087 0.003
8.743 6.070 0.003
8.743 6.509 0.003
8.743 6.151 0.003
7.494 5.764 0.004
8.743 5.686 0.000
8.743 5.869 0.000
8.743 5.684 0.000
8.743 6.488 0.000
8.327 5.435 0.000
8.743 5.865 0.000
8.743 5.856 0.000
8.743 5.735 0.000
8.743 5.845 0.000
9.576 6.207 0.000
9.576 5.866 0.000
8.743 5.218 0.000
7.911 5.989 0.000
8.743 6.011 0.000
8.743 5.629 0.000
8.743 5.767 0.000
7.494 5.396 0.000
8.743 5.516 0.000
12.491 4.183 0.000
9.576 0.207 0.173
9.160 0.765 0.302
9.576 0.186 0.149
9.576 0.214 0.178
9.576 0.179 0.146
9.160 0.239 0.152
8.327 4.087 0.000
8.327 2.360 0.000
8.743 6.414 0.000
8.743 2.221 0.000
8.743 2.140 0.000
Customer :
Ship To :
Material No.Material Description
M7GLABA125M5 ADD-X1410 ADDITIVE SLOW ADDITIVE
M7GFAKA001M5 BW-0000 DPA-106 LAM. BLACK BONDWISER
M7GFAKA002M5 BW-0001 BONDWISER LAM. OT YELLOW
M7GFAKA005M5 BW-0007 BONDWISER CYAN BLUE
M7GFAKA011M5 BW-0033 BONDWISER RUBINE RED
M7GFAKA013M5 BW-00QR BONDWISER LAM QUIN RED
M7GFAKA051M5 BW-X023 BONDWISER FAST LAM.LINE EXTENDER
M7GCBJA044P1 PR-X1077 PROTECH WATER PRIMER
M7GFBOA085DR PY2-X1022 PYROTECH HR MATTE OPV
M7GFCFA136DR PY3 PYROTECH PT.2747 C BLUE
M7GFCFA106M5 PY3-0000 PYROTECH DENSE BLACK
M7GFCFA107M5 PY3-0001 PYROTECH GS YELLOW
M7GFCFA009M5 PY3-P000 PYROTECH PROCESS BLACK
M7GFCFA113M5 PY3-PX PYROTECH PROCESS EXTENDER
M7GFCFA010M5 PY3-PX001 PYROTECH PRO. YELLOW SURFACE
M7GFCFA011M5 PY3-PX007 PYROTECH PRO. CYAN SURFACE
M7GFCFA012M5 PY3-PX033 PYROTECH PRO. MAGENTA SURFACE
M7GFCFA005DR PY3-X010 PYROTECH HI-HEAT OPV *MIX WELL*
M7GFBTA001DR RX-P001 REXTA R631 US WHITE
M7GFCBA100P1 VERSAFILM PT.375 C GREEN DIGITAL
1000012401 PPC FLEXIBLE PACKAGING- NSL
VOC&HAP Report by Custo
From: 7/1/2022 To: 7/31/20
1000012401 PPC FLEXIBLE PACKAGING- NSL
M7GFCBA008P1 VF-0010 VERSAFILM POLY EXTENDER
M7GFCBA081P1 VF-PX06 VERSAFILM PRO. YELLOW
M7GFCBA083P1 VF-PX08 VERSAFILM PRO. BLACK
M7GFCCA005M5 XJK-X016 DPI-182 PROCESS EXTENDER
M7GFCCA010M5 XJK-X023 DPI-182 PROCESS CYAN BLUE
M7GFCCA011M5 XJK-X024 DPI-182 PROCESS YELLOW
M7GFCCA012M5 XJK-X025 DPI-182 PROCESS MAGENTA (NP)
M7GFCCA013M5 XJK-X026 DPI-182 PROCESS BLACK
Ship To Total :
Sold To Total :
CAS-NO Material Name
7 100-41-4 Ethylbenzene
7 111-77-3 Diethylene glycol monomethyl ether
7 111-90-0 Diethylene glycol monoethyl ether
7 1330-20-7 Xylene
7 67-56-1 Methyl alcohol
7 79-10-7 Acrylic acid
Grand Total
HAPs Summary
2022
ETHYL ACETATE 99%
HS 2790 IBC705|13271
ISOPROPANOL 99%
Purchased (Base
Unit)
VOC %
bv wt.VOC (LBS)
HAP %
bv wt.HAP (LBS)
Specific
Gravity
210.000 LB 0.000 0.000 0.000 0.000 1.000
560.000 LB 68.350 382.760 0.032 0.179 1.050
420.000 LB 48.722 204.632 0.032 0.134 1.050
282.000 LB 68.712 193.768 0.032 0.090 0.950
140.000 LB 70.347 98.486 0.032 0.045 1.050
105.000 LB 72.297 75.912 0.032 0.034 1.050
560.000 LB 76.911 430.699 0.048 0.269 0.900
35.000 LB 5.931 2.076 0.000 0.000 1.100
3,568.000 LB 65.272 2,328.891 0.000 0.000 1.000
700.000 LB 41.526 290.680 0.000 0.000 1.050
210.000 LB 67.079 140.865 0.000 0.000 1.050
135.000 LB 66.975 90.416 0.000 0.000 1.050
280.000 LB 59.675 167.091 0.000 0.000 1.050
263.000 LB 75.709 199.115 0.000 0.000 0.950
210.000 LB 68.748 144.370 0.000 0.000 1.050
385.000 LB 64.386 247.885 0.000 0.000 1.050
280.000 LB 65.957 184.680 0.000 0.000 1.050
2,170.000 LB 72.000 1,562.400 0.000 0.000 0.900
8,050.000 LB 33.488 2,695.784 0.000 0.000 1.500
18.000 LB 2.157 0.388 1.803 0.325 1.150

omer
022

72.000 LB 8.350 6.012 3.300 2.376 1.100
18.000 LB 5.059 0.911 2.091 0.376 1.150
70.000 LB 2.388 1.672 0.056 0.039 1.150
1,120.000 LB 49.082 549.721 0.000 0.000 1.000
1,120.000 LB 28.340 317.406 0.000 0.000 1.000
978.000 LB 73.362 717.478 0.000 0.000 1.050
1,120.000 LB 25.408 284.566 0.000 0.000 1.050
1,737.000 LB 24.479 425.192 0.000 0.000 1.050
24,816.000 11,743.854 3.867
24,816.000 11,743.854 3.867
Lbs HAPs
0.002
3.057
0.033
0.002
0.751
0.022
3.867

1636
7535
0
Density
LB/GAL
VOC
LB/GAL
HAP
LB/GAL
8.327 0.000 0.000
8.743 5.976 0.003
8.743 4.260 0.003
7.911 5.436 0.003
8.743 6.151 0.003
8.743 6.321 0.003
7.494 5.764 0.004
9.160 0.543 0.000
8.327 5.435 0.000
8.743 3.631 0.000
8.743 5.865 0.000
8.743 5.856 0.000
8.743 5.218 0.000
7.911 5.989 0.000
8.743 6.011 0.000
8.743 5.629 0.000
8.743 5.767 0.000
7.494 5.396 0.000
12.491 4.183 0.000
9.576 0.207 0.173
9.160 0.765 0.302
9.576 0.484 0.200
9.576 0.229 0.005
8.327 4.087 0.000
8.327 2.360 0.000
8.743 6.414 0.000
8.743 2.221 0.000
8.743 2.140 0.000
Customer :
Ship To :
Material No.Material Description
M7GLABA125M5 ADD-X1410 ADDITIVE SLOW ADDITIVE
M7GFAKA001M5 BW-0000 DPA-106 LAM. BLACK BONDWISER
M7GFAKA002M5 BW-0001 BONDWISER LAM. OT YELLOW
M7GFAKA003M5 BW-0004 BONDWISER YS RHODAMINE
M7GFAKA008M5 BW-0013 BONDWISER YS NAPH.RED
M7GFAKA011M5 BW-0033 BONDWISER RUBINE RED
M7GFAKA036M5 BW-0873 BONDWISER PT. 873 GOLD
M7GFAKA051M5 BW-X023 BONDWISER FAST LAM.LINE EXTENDER
M7GFBOA085DR PY2-X1022 PYROTECH HR MATTE OPV
M7GFCFA136DR PY3 PYROTECH PT.2747 C BLUE
M7GFCFA106M5 PY3-0000 PYROTECH DENSE BLACK
M7GFCFA108M5 PY3-0007 PYROTECH BLUE
M7GFCFA111M5 PY3-0026 PYROTECH CARBAZOLE VIOLET
M7GFCFA112M5 PY3-0033 PYROTECH RUBINE RED
M7GFCFA009M5 PY3-P000 PYROTECH PROCESS BLACK
M7GFCFA010M5 PY3-PX001 PYROTECH PRO. YELLOW SURFACE
M7GFCFA011M5 PY3-PX007 PYROTECH PRO. CYAN SURFACE
M7GFCFA012M5 PY3-PX033 PYROTECH PRO. MAGENTA SURFACE
M7GFCFA005DR PY3-X010 PYROTECH HI-HEAT OPV *MIX WELL*
M7GFBTA001DR RX-P001 REXTA R631 US WHITE
1000012401 PPC FLEXIBLE PACKAGING- NSL
VOC&HAP Report by Custo
From: 8/1/2022 To: 8/31/20
1000012401 PPC FLEXIBLE PACKAGING- NSL
M7GFCBA180P1 VF VERSAFILM PT.MEDIUM PURPLE U
M7GFCBA179P1 VF VERSAFILM PT.PINK U
M7GFCBA016P1 VF-0032 VERSAFILM PANTONE 032 RED
M7GFCBA080P1 VF-PX05 VERSAFILM PRO. MAGENTA
M7GFCCA005M5 XJK-X016 DPI-182 PROCESS EXTENDER
M7GFCCA011M5 XJK-X024 DPI-182 PROCESS YELLOW
M7GFCCA013M5 XJK-X026 DPI-182 PROCESS BLACK
Ship To Total :
Sold To Total :
CAS-NO Material Name
8 100-41-4 Ethylbenzene
8 111-77-3 Diethylene glycol monomethyl ether
8 1330-20-7 Xylene
8 67-56-1 Methyl alcohol
8 79-10-7 Acrylic acid
Grand Total
HAPs Summary
2022
ETHYL ACETATE 99%
HS 2790 IBC705|13271
ISOPROPANOL 99%
Purchased (Base
Unit)
VOC %
bv wt.VOC (LBS)
HAP %
bv wt.HAP (LBS)
Specific
Gravity
162.000 LB 0.000 0.000 0.000 0.000 1.000
280.000 LB 68.350 191.380 0.032 0.090 1.050
347.000 LB 48.722 169.065 0.032 0.111 1.050
137.000 LB 68.937 94.444 0.032 0.044 1.050
135.000 LB 69.429 93.729 0.030 0.040 1.050
101.000 LB 70.347 71.050 0.032 0.032 1.050
114.000 LB 70.902 80.829 0.021 0.024 1.000
560.000 LB 76.911 430.699 0.048 0.269 0.900
1,057.000 LB 65.272 689.921 0.000 0.000 1.000
1,400.000 LB 41.526 581.360 0.000 0.000 1.050
391.000 LB 67.079 262.277 0.000 0.000 1.050
210.000 LB 65.595 137.748 0.000 0.000 1.050
140.000 LB 64.814 90.739 0.000 0.000 1.150
187.000 LB 61.252 114.541 0.000 0.000 1.150
280.000 LB 59.675 167.091 0.000 0.000 1.050
638.000 LB 68.748 438.610 0.000 0.000 1.050
499.000 LB 64.386 321.285 0.000 0.000 1.050
280.000 LB 65.957 184.680 0.000 0.000 1.050
8,075.000 LB 72.000 5,814.000 0.000 0.000 0.900
8,000.000 LB 33.488 2,679.040 0.000 0.000 1.500

omer
022

9.000 LB 2.957 0.266 2.484 0.224 1.050
9.000 LB 3.348 0.301 2.812 0.253 1.100
36.000 LB 2.213 0.797 1.822 0.656 1.100
37.000 LB 3.849 1.424 3.321 1.229 1.100
1,120.000 LB 49.082 549.721 0.000 0.000 1.000
420.000 LB 73.362 308.120 0.000 0.000 1.050
210.000 LB 24.479 51.405 0.000 0.000 1.050
24,834.000 13,524.522 2.971
24,834.000 13,524.522 2.971
Lbs HAPs
0.001
2.236
0.001
0.610
0.123
2.971

820
17330
Density
LB/GAL VOC LB/GAL HAP LB/GAL
8.327 0.000 0.000
8.743 5.976 0.003
8.743 4.260 0.003
8.743 6.027 0.003
8.743 6.070 0.003
8.743 6.151 0.003
8.327 5.904 0.002
7.494 5.764 0.004
8.327 5.435 0.000
8.743 3.631 0.000
8.743 5.865 0.000
8.743 5.735 0.000
9.576 6.207 0.000
9.576 5.866 0.000
8.743 5.218 0.000
8.743 6.011 0.000
8.743 5.629 0.000
8.743 5.767 0.000
7.494 5.396 0.000
12.491 4.183 0.000
8.743 0.259 0.217
9.160 0.307 0.258
9.160 0.203 0.167
9.160 0.353 0.304
8.327 4.087 0.000
8.743 6.414 0.000
8.743 2.140 0.000
Customer :
Ship To :
Material No.Material Description
M7GLABA105P1 ADD-X1327 ADDITIVE LOW ODOR PH ADJUSTER
M7GFAKA001M5 BW-0000 DPA-106 LAM. BLACK BONDWISER
M7GFAKA002M5 BW-0001 BONDWISER LAM. OT YELLOW
M7GFAKA008M5 BW-0013 BONDWISER YS NAPH.RED
M7GFAKA037DR BW-0877 DPA-106 PT. 0877 C SILVER INK
M7GFAKA051M5 BW-X023 BONDWISER FAST LAM.LINE EXTENDER
M7GFANA016M5 CORE-X00015 CORE SLOW AAOT YELLOW BASE
M7GFANA017M5 CORE-X00016 CORE SLOW BON RUBINE BASE
M7GFANA028M5 CORE-X00038 CORE DIANIS.ORANGE BASE
M7GFBOA085DR PY2-X1022 PYROTECH HR MATTE OPV
M7GFCFA136DR PY3 PYROTECH PT.2747 C BLUE
M7GFCFA106M5 PY3-0000 PYROTECH DENSE BLACK
M7GFCFA107M5 PY3-0001 PYROTECH GS YELLOW
M7GFCFA110M5 PY3-0013 PYROTECH WARM RED
M7GFCFA113M5 PY3-PX PYROTECH PROCESS EXTENDER
M7GFBQA006M5 PYG-0013 PYROGLOSS Y/S RED
M7GFBTA001DR RX-P001 REXTA R631 US WHITE
M7GFCBA181P1 VF VERSAFILM PT.072 U BLUE
M7GFCBA008P1 VF-0010 VERSAFILM POLY EXTENDER
M7GFCBA044P1 VF-X500 VERSAFILM Y/S NAPHTHOL RED
1000012401 PPC FLEXIBLE PACKAGING- NSL
VOC&HAP Report by Custo
From: 9/1/2022 To: 9/30/20
1000012401 PPC FLEXIBLE PACKAGING- NSL
M7GFCBA052P1 VF-X508 VERSAFILM REFLEX BLUE
M7GFCCA005M5 XJK-X016 DPI-182 PROCESS EXTENDER
M7GFCCA010M5 XJK-X023 DPI-182 PROCESS CYAN BLUE
M7GFCCA011M5 XJK-X024 DPI-182 PROCESS YELLOW
M7GFCCA012M5 XJK-X025 DPI-182 PROCESS MAGENTA (NP)
M7GFCCA013M5 XJK-X026 DPI-182 PROCESS BLACK
Ship To Total :
Sold To Total :
CAS-NO Material Name
9 100-41-4 Ethylbenzene
9 111-77-3 Diethylene glycol monomethyl ether
9 1330-20-7 Xylene
9 140-88-5 Ethyl acrylate
9 67-56-1 Methyl alcohol
9 75-07-0 Acetaldehyde
9 79-10-7 Acrylic acid
HAPs Summary
Grand Total
2022
ETHYL ACETATE 99%
HS 2790 IBC705|13271
ISOPROPANOL 99%
Purchased (Base
Unit)
VOC %
bv wt.VOC (LBS)
HAP %
bv wt.HAP (LBS)
Specific
Gravity
64.000 LB 0.000 0.000 0.000 0.000 1.050
630.000 LB 68.350 430.605 0.032 0.202 1.100
210.000 LB 48.722 102.316 0.032 0.067 1.100
280.000 LB 69.429 194.402 0.030 0.083 1.100
1,071.000 LB 55.955 599.273 0.030 0.326 0.950
280.000 LB 76.911 215.349 0.048 0.134 0.900
105.000 LB 70.100 73.605 0.000 0.000 1.050
70.000 LB 66.250 46.375 0.000 0.000 1.050
70.000 LB 72.563 50.794 0.000 0.000 1.050
3,500.000 LB 65.272 2,284.506 0.000 0.000 1.050
735.000 LB 41.526 305.214 0.000 0.000 1.050
210.000 LB 67.079 140.865 0.000 0.000 1.050
114.000 LB 66.975 76.351 0.000 0.000 1.050
140.000 LB 66.855 93.596 0.000 0.000 1.050
280.000 LB 75.709 211.986 0.000 0.000 0.900
70.000 LB 60.097 42.068 0.000 0.000 1.050
11,958.000 LB 33.488 4,004.495 0.000 0.000 1.500
18.500 LB 1.183 0.219 0.994 0.184 1.100
72.000 LB 8.350 6.012 3.300 2.376 1.100
18.000 LB 1.943 0.350 1.559 0.281 1.150

omer
022

36.000 LB 1.432 0.516 1.159 0.417 1.150
1,190.000 LB 49.082 584.078 0.000 0.000 1.000
975.000 LB 28.340 276.313 0.000 0.000 1.000
1,050.000 LB 73.362 770.299 0.000 0.000 1.050
560.000 LB 25.408 142.283 0.000 0.000 1.050
1,750.000 LB 24.479 428.374 0.000 0.000 1.050
25,456.500 11,080.243 4.070
25,456.500 11,080.243 4.070
Lbs HAPs
0.002
3.251
0.002
0.000
0.812
0.000
0.003

4.070
2460
9042
Density
LB/GAL
VOC
LB/GAL
HAP
LB/GAL
8.743 0.000 0.000
9.160 6.261 0.003
9.160 4.463 0.003
9.160 6.360 0.003
7.911 4.426 0.002
7.494 5.764 0.004
8.743 6.129 0.000
8.743 5.792 0.000
8.743 6.344 0.000
8.743 5.707 0.000
8.743 3.631 0.000
8.743 5.865 0.000
8.743 5.856 0.000
8.743 5.845 0.000
7.494 5.674 0.000
8.743 5.255 0.000
12.491 4.183 0.000
9.160 0.108 0.091
9.160 0.765 0.302
9.576 0.186 0.149
9.576 0.137 0.111
8.327 4.087 0.000
8.327 2.360 0.000
8.743 6.414 0.000
8.743 2.221 0.000
8.743 2.140 0.000
Customer :
Ship To :
Material No.Material Description
M7GLABA125M5 ADD-X1410 ADDITIVE SLOW ADDITIVE
M7GFAKA001M5 BW-0000 DPA-106 LAM. BLACK BONDWISER
M7GFAKA002M5 BW-0001 BONDWISER LAM. OT YELLOW
M7GFAKA011M5 BW-0033 BONDWISER RUBINE RED
M7GFAKA037M5 BW-0877 DPA-106 PT. 0877 C SILVER INK
M7GFAKA051M5 BW-X023 BONDWISER FAST LAM.LINE EXTENDER
M7GCBRA002P1 PG3-0802 POWERGLOW PT.802 FLUOR.GREEN
M7GCBRA004P1 PG3-0804 POWERGLOW PT.804 FLUOR.ORANGE
M7GCBRA006P1 PG3-0806 POWERGLOW PT.806 FLUOR.PINK
M7GCBJA044P1 PR-X1077 PROTECH WATER PRIMER
M7GFBOA085DR PY2-X1022 PYROTECH HR MATTE OPV
M7GFCFA136DR PY3 PYROTECH PT.2747 C BLUE
M7GFCFA107M5 PY3-0001 PYROTECH GS YELLOW
M7GFCFA010M5 PY3-PX001 PYROTECH PRO. YELLOW SURFACE
M7GFCFA011M5 PY3-PX007 PYROTECH PRO. CYAN SURFACE
M7GFCFA012M5 PY3-PX033 PYROTECH PRO. MAGENTA SURFACE
M7GFCFA005DR PY3-X010 PYROTECH HI-HEAT OPV *MIX WELL*
M7GFBQA028DR PYG-X001 PYROGLOSS GLOSS HR WHITE
M7GFBTA001DR RX-P001 REXTA R631 US WHITE
M7GFCBA083P1 VF-PX08 VERSAFILM PRO. BLACK
1000012401 PPC FLEXIBLE PACKAGING- NSL
VOC&HAP Report by Custo
From: 10/1/2022 To: 10/31/2
1000012401 PPC FLEXIBLE PACKAGING- NSL
M7GFCCA010M5 XJK-X023 DPI-182 PROCESS CYAN BLUE
M7GFCCA011M5 XJK-X024 DPI-182 PROCESS YELLOW
M7GFCCA012M5 XJK-X025 DPI-182 PROCESS MAGENTA (NP)
Ship To Total :
Sold To Total :
CAS-NO Material Name
#100-41-4 Ethylbenzene
#111-90-0 Diethylene glycol monoethyl ether
#1330-20-7 Xylene
#67-56-1 Methyl alcohol
#79-10-7 Acrylic acid
Grand Total
HAPs Summary
2022
ETHYL ACETATE 99%
HS 2790 IBC705|13271
ISOPROPANOL 99%
Purchased (Base
Unit)
VOC %
bv wt.VOC (LBS)
HAP %
bv wt.HAP (LBS)
Specific
Gravity
140.000 LB 0.000 0.000 0.000 0.000 1.000
553.000 LB 68.350 377.976 0.032 0.177 1.100
105.000 LB 48.722 51.158 0.032 0.034 1.100
140.000 LB 70.347 98.486 0.032 0.045 1.050
284.000 LB 55.955 158.911 0.030 0.086 1.050
280.000 LB 76.911 215.349 0.048 0.134 0.900
20.000 LB 0.000 0.000 0.002 0.000 0.950
18.000 LB 0.000 0.000 0.000 0.000 1.000
18.000 LB 0.000 0.000 0.000 0.000 1.000
36.000 LB 5.931 2.135 0.000 0.000 1.100
3,482.000 LB 65.272 2,272.757 0.000 0.000 1.050
700.000 LB 41.526 290.680 0.000 0.000 1.050
108.000 LB 66.975 72.332 0.000 0.000 1.050
128.000 LB 68.748 87.997 0.000 0.000 1.050
283.000 LB 64.386 182.212 0.000 0.000 1.050
283.000 LB 65.957 186.659 0.000 0.000 1.050
1,400.000 LB 72.000 1,008.000 0.000 0.000 0.900
500.000 LB 33.614 168.070 0.000 0.000 1.500
8,118.000 LB 33.488 2,718.556 0.000 0.000 1.500
72.000 LB 2.388 1.720 0.056 0.040 1.150

omer
2022

422.000 LB 28.340 119.594 0.000 0.000 1.000
410.000 LB 73.362 300.783 0.000 0.000 1.050
560.000 LB 25.408 142.283 0.000 0.000 1.050
18,060.000 8,455.658 0.516
18,060.000 8,455.658 0.516
Lbs HAPs
0.001
0.024
0.001
0.476
0.015
0.516

820
9042
Density
LB/GAL
VOC
LB/GAL
HAP
LB/GAL
8.327 0.000 0.000
9.160 6.261 0.003
9.160 4.463 0.003
8.743 6.151 0.003
8.743 4.892 0.003
7.494 5.764 0.004
7.911 0.000 0.000
8.327 0.000 0.000
8.327 0.000 0.000
9.160 0.543 0.000
8.743 5.707 0.000
8.743 3.631 0.000
8.743 5.856 0.000
8.743 6.011 0.000
8.743 5.629 0.000
8.743 5.767 0.000
7.494 5.396 0.000
12.491 4.199 0.000
12.491 4.183 0.000
9.576 0.229 0.005
8.327 2.360 0.000
8.743 6.414 0.000
8.743 2.221 0.000
Customer :
Ship To :
Material No.Material Description
M7GLABA105P1 ADD-X1327 ADDITIVE LOW ODOR PH ADJUSTER
M7GLABA125M5 ADD-X1410 ADDITIVE SLOW ADDITIVE
M7GFAKA002M5 BW-0001 BONDWISER LAM. OT YELLOW
M7GFAKA005M5 BW-0007 BONDWISER CYAN BLUE
M7GFAKA008M5 BW-0013 BONDWISER YS NAPH.RED
M7GFAKA009M5 BW-0026 DPA-106 LAM. CARBAZOLE VIOLET
M7GFAKA011M5 BW-0033 BONDWISER RUBINE RED
M7GFAKA036M5 BW-0873 BONDWISER PT. 873 GOLD
M7GFAKA037M5 BW-0877 DPA-106 PT. 0877 C SILVER INK
M7GFANA018M5 CORE-X00017 CORE SLOW G/S BLUE BASE
M7GFANA031M5 CORE-X00044 CORE CARBAZOLE VIOLET BASE
M7GFBOA085DR PY2-X1022 PYROTECH HR MATTE OPV
M7GFCFA136DR PY3 PYROTECH PT.2747 C BLUE
M7GFCFA106M5 PY3-0000 PYROTECH DENSE BLACK
M7GFCFA110M5 PY3-0013 PYROTECH WARM RED
M7GFCFA111M5 PY3-0026 PYROTECH CARBAZOLE VIOLET
M7GFCFA112M5 PY3-0033 PYROTECH RUBINE RED
M7GFCFA005DR PY3-X010 PYROTECH HI-HEAT OPV *MIX WELL*
M7GFBTA001DR RX-P001 REXTA R631 US WHITE
M7GFCBA100P1 VERSAFILM PT.375 C GREEN DIGITAL
1000012401 PPC FLEXIBLE PACKAGING- NSL
VOC&HAP Report by Custo
From: 11/1/2022 To: 11/30/2
1000012401 PPC FLEXIBLE PACKAGING- NSL
M7GFCBA008P1 VF-0010 VERSAFILM POLY EXTENDER
M7GFCCA005M5 XJK-X016 DPI-182 PROCESS EXTENDER
M7GFCCA010M5 XJK-X023 DPI-182 PROCESS CYAN BLUE
M7GFCCA011M5 XJK-X024 DPI-182 PROCESS YELLOW
M7GFCCA012M5 XJK-X025 DPI-182 PROCESS MAGENTA (NP)
M7GFCCA013M5 XJK-X026 DPI-182 PROCESS BLACK
Ship To Total :
Sold To Total :
CAS-NO Material Name
#100-41-4 Ethylbenzene
#111-77-3 Diethylene glycol monomethyl ether
#1330-20-7 Xylene
#67-56-1 Methyl alcohol
#75-07-0 Acetaldehyde
#79-10-7 Acrylic acid
Grand Total
HAPs Summary
2022
ETHYL ACETATE 99%
HS 2790 IBC705|13271
ISOPROPANOL 99%
Purchased (Base
Unit)
VOC %
bv wt.VOC (LBS)
HAP %
bv wt.HAP (LBS)
Specific
Gravity
32.000 LB 0.000 0.000 0.000 0.000 1.050
210.000 LB 0.000 0.000 0.000 0.000 1.000
105.000 LB 48.722 51.158 0.032 0.034 1.100
108.000 LB 68.712 74.209 0.032 0.035 0.950
216.000 LB 69.429 149.967 0.030 0.064 1.100
70.000 LB 74.442 52.109 0.032 0.022 1.050
105.000 LB 70.347 73.864 0.032 0.034 1.050
70.000 LB 70.902 49.632 0.021 0.015 1.000
553.000 LB 55.955 309.428 0.030 0.168 1.050
70.000 LB 65.030 45.521 0.000 0.000 1.050
70.000 LB 74.200 51.940 0.000 0.000 1.050
1,400.000 LB 65.272 913.802 0.000 0.000 1.050
1,050.000 LB 41.526 436.020 0.000 0.000 1.050
280.000 LB 67.079 187.820 0.000 0.000 1.050
140.000 LB 66.855 93.596 0.000 0.000 1.050
70.000 LB 64.814 45.370 0.000 0.000 1.150
70.000 LB 61.252 42.876 0.000 0.000 1.150
3,150.000 LB 72.000 2,268.000 0.000 0.000 0.900
6,000.000 LB 33.488 2,009.280 0.000 0.000 1.500
18.000 LB 2.157 0.388 1.803 0.325 1.150

omer
2022

108.000 LB 8.350 9.017 3.300 3.564 1.100
560.000 LB 49.082 274.860 0.000 0.000 1.000
490.000 LB 28.340 138.865 0.000 0.000 1.000
490.000 LB 73.362 359.473 0.000 0.000 1.050
350.000 LB 25.408 88.927 0.000 0.000 1.050
1,759.000 LB 24.479 430.577 0.000 0.000 1.050
17,544.000 8,156.701 4.260
17,544.000 8,156.701 4.260
Lbs HAPs
0.002
3.884
0.002
0.371
0.000
0.001
4.260

2050
9042
Density
LB/GAL
VOC
LB/GAL
HAP
LB/GAL
8.743 0.000 0.000
8.327 0.000 0.000
9.160 4.463 0.003
7.911 5.436 0.003
9.160 6.360 0.003
8.743 6.509 0.003
8.743 6.151 0.003
8.327 5.904 0.002
8.743 4.892 0.003
8.743 5.686 0.000
8.743 6.488 0.000
8.743 5.707 0.000
8.743 3.631 0.000
8.743 5.865 0.000
8.743 5.845 0.000
9.576 6.207 0.000
9.576 5.866 0.000
7.494 5.396 0.000
12.491 4.183 0.000
9.576 0.207 0.173
9.160 0.765 0.302
8.327 4.087 0.000
8.327 2.360 0.000
8.743 6.414 0.000
8.743 2.221 0.000
8.743 2.140 0.000
Customer :
Ship To :
Material No.Material Description
M7GLABA105P1 ADD-X1327 ADDITIVE LOW ODOR PH ADJUSTER
M7GLABA125M5 ADD-X1410 ADDITIVE SLOW ADDITIVE
M7GFAKA001M5 BW-0000 DPA-106 LAM. BLACK BONDWISER
M7GFAKA002M5 BW-0001 BONDWISER LAM. OT YELLOW
M7GFAKA005M5 BW-0007 BONDWISER CYAN BLUE
M7GFAKA008M5 BW-0013 BONDWISER YS NAPH.RED
M7GFAKA010M5 BW-0030 BONDWISER LAM.DIANISIDENE ORANGE
M7GFAKA011M5 BW-0033 BONDWISER RUBINE RED
M7GFAKA037DR BW-0877 DPA-106 PT. 0877 C SILVER INK
M7GFAKA051M5 BW-X023 BONDWISER FAST LAM.LINE EXTENDER
M7GCBJA044P1 PR-X1077 PROTECH WATER PRIMER
M7GFBOA085DR PY2-X1022 PYROTECH HR MATTE OPV
M7GFBTA001DR RX-P001 REXTA R631 US WHITE
M7GFCBA181P1 VF VERSAFILM PT.072 U BLUE
M7GFCBA008P1 VF-0010 VERSAFILM POLY EXTENDER
M7GFCBA014P1 VF-0021 VERSAFILM PANTONE 021 ORANGE
M7GFCBA080P1 VF-PX05 VERSAFILM PRO. MAGENTA
M7GFCBA081P1 VF-PX06 VERSAFILM PRO. YELLOW
M7GFCBA082P1 VF-PX07 VERSAFILM PRO. CYAN
M7GFCBA026P1 VF-S048 VERSAFILM HI OPAQUE WHITE
1000012401 PPC FLEXIBLE PACKAGING- NSL
VOC&HAP Report by Custo
From: 12/1/2022 To: 12/31/2
1000012401 PPC FLEXIBLE PACKAGING- NSL
M7GFCBA044P1 VF-X500 VERSAFILM Y/S NAPHTHOL RED
M7GFCBA045P1 VF-X501 VERSAFILM RUBINE RED BASE
M7GFCBA047P1 VF-X503 VERSAFILM YELLOW BASE
M7GFCBA048P1 VF-X504 VERSAFILM GREEN BASE
M7GFCCA005M5 XJK-X016 DPI-182 PROCESS EXTENDER
M7GFCCA010M5 XJK-X023 DPI-182 PROCESS CYAN BLUE
M7GFCCA011M5 XJK-X024 DPI-182 PROCESS YELLOW
M7GFCCA012M5 XJK-X025 DPI-182 PROCESS MAGENTA (NP)
M7GFCCA013M5 XJK-X026 DPI-182 PROCESS BLACK
Ship To Total :
Sold To Total :
CAS-NO Material Name
#100-41-4 Ethylbenzene
#111-77-3 Diethylene glycol monomethyl ether
#111-90-0 Diethylene glycol monoethyl ether
#1330-20-7 Xylene
#140-88-5 Ethyl acrylate
#67-56-1 Methyl alcohol
HAPs Summary
#79-10-7 Acrylic acid
Grand Total
2022
ETHYL ACETATE 99%
HS 2790 IBC705|13271
ISOPROPANOL 99%
Purchased (Base
Unit)
VOC %
bv wt.VOC (LBS)
HAP %
bv wt.HAP (LBS)
Specific
Gravity
64.000 LB 0.000 0.000 0.000 0.000 1.050
140.000 LB 0.000 0.000 0.000 0.000 1.000
487.000 LB 68.350 332.865 0.032 0.156 1.100
245.000 LB 48.722 119.369 0.032 0.078 1.100
105.000 LB 68.712 72.148 0.032 0.034 0.950
342.000 LB 69.429 237.448 0.030 0.101 1.100
70.000 LB 70.197 49.138 0.032 0.022 1.050
105.000 LB 70.347 73.864 0.032 0.034 1.050
703.000 LB 55.955 393.360 0.030 0.214 0.950
557.000 LB 76.911 428.391 0.048 0.267 0.900
36.000 LB 5.931 2.135 0.000 0.000 1.100
1,400.000 LB 65.272 913.802 0.000 0.000 1.050
8,000.000 LB 33.488 2,679.040 0.000 0.000 1.500
18.000 LB 1.183 0.213 0.994 0.179 1.100
72.000 LB 8.350 6.012 3.300 2.376 1.100
17.500 LB 2.248 0.393 1.888 0.330 1.150
36.000 LB 3.849 1.386 3.321 1.195 1.100
37.000 LB 5.059 1.872 2.091 0.774 1.150
36.000 LB 4.564 1.643 2.089 0.752 1.150
41.000 LB 1.817 0.745 1.523 0.624 1.130

omer
2022

18.000 LB 1.943 0.350 1.559 0.281 1.150
18.000 LB 2.238 0.403 1.856 0.334 1.150
18.000 LB 1.871 0.337 1.525 0.275 1.150
18.000 LB 2.012 0.362 1.656 0.298 1.100
560.000 LB 49.082 274.860 0.000 0.000 1.000
420.000 LB 28.340 119.027 0.000 0.000 1.000
415.000 LB 73.362 304.451 0.000 0.000 1.050
426.000 LB 25.408 108.237 0.000 0.000 1.050
346.000 LB 24.479 84.696 0.000 0.000 1.050
14,750.500 6,206.546 8.324
14,750.500 6,206.546 8.324
Lbs HAPs
0.004
7.213
0.040
0.004
0.001
0.906

0.156
8.324
2050
4521
Density
LB/GAL
VOC
LB/GAL
HAP
LB/GAL
8.743 0.000 0.000
8.327 0.000 0.000
9.160 6.261 0.003
9.160 4.463 0.003
7.911 5.436 0.003
9.160 6.360 0.003
8.743 6.138 0.003
8.743 6.151 0.003
7.911 4.426 0.002
7.494 5.764 0.004
9.160 0.543 0.000
8.743 5.707 0.000
12.491 4.183 0.000
9.160 0.108 0.091
9.160 0.765 0.302
9.576 0.215 0.181
9.160 0.353 0.304
9.576 0.484 0.200
9.576 0.437 0.200
9.410 0.171 0.143
9.576 0.186 0.149
9.576 0.214 0.178
9.576 0.179 0.146
9.160 0.184 0.152
8.327 4.087 0.000
8.327 2.360 0.000
8.743 6.414 0.000
8.743 2.221 0.000
8.743 2.140 0.000
Material Name Lbs HAPs
ADD-X1410 ADDITIVE SLOW ADDITIVE
BW-0000 DPA-106 LAM. BLACK BONDWISER
BW-0001 BONDWISER LAM. OT YELLOW
BW-0008 BONDWISER LAM.CYAN GREEN
BW-0013 BONDWISER YS NAPH.RED
BW-0026 DPA-106 LAM. CARBAZOLE VIOLET
BW-0033 BONDWISER RUBINE RED
BW-X023 BONDWISER FAST LAM.LINE EXTENDER
CORE-X00017 CORE SLOW G/S BLUE BASE
CORE-X00038 CORE DIANIS.ORANGE BASE
CORE-X00040 CORE Y/S NAPH RED
CORE-X00044 CORE CARBAZOLE VIOLET BASE
PY2-X1022 PYROTECH HR MATTE OPV
PY3-0000 PYROTECH DENSE BLACK
PY3-0001 PYROTECH GS YELLOW
PY3-0007 PYROTECH BLUE
PY3-0013 PYROTECH WARM RED
PY3-0026 PYROTECH CARBAZOLE VIOLET
PY3-0033 PYROTECH RUBINE RED
PY3-P000 PYROTECH PROCESS BLACK
PY3-PX PYROTECH PROCESS EXTENDER
PY3-PX001 PYROTECH PRO. YELLOW SURFACE
PY3-PX007 PYROTECH PRO. CYAN SURFACE
PY3-PX033 PYROTECH PRO. MAGENTA SURFACE
PY3-X010 PYROTECH HI-HEAT OPV *MIX WELL*
PYG-X058 PYROGLOSS COTTONCANDY VEND PINK
RX-P001 REXTA R631 US WHITE
VERSAFILM PT.375 C GREEN DIGITAL
VF-0010 VERSAFILM POLY EXTENDER
VF-X500 VERSAFILM Y/S NAPHTHOL RED
VF-X501 VERSAFILM RUBINE RED BASE
VF-X503 VERSAFILM YELLOW BASE
VF-X504 VERSAFILM GREEN BASE
XJK-X016 DPI-182 PROCESS EXTENDER
XJK-X023 DPI-182 PROCESS CYAN BLUE
XJK-X024 DPI-182 PROCESS YELLOW
XJK-X025 DPI-182 PROCESS MAGENTA (NP)
XJK-X026 DPI-182 PROCESS BLACK
BW-0030 BONDWISER LAM.DIANISIDENE ORANGE
BW-0873 BONDWISER PT. 873 GOLD
BW-0877 DPA-106 PT. 0877 C SILVER INK
BW-X1191 BONDWISER PT. 021 C ORANGE
VF-S048 VERSAFILM HI OPAQUE WHITE
HAPs Summary by product
VF-X502 VERSAFILM CARBAZOLE VIOLET BASE
BW-0007 BONDWISER CYAN BLUE
VF-PX08 VERSAFILM PRO. BLACK
BW-0004 BONDWISER YS RHODAMINE
VF-0021 VERSAFILM PANTONE 021 ORANGE
VF-PX06 VERSAFILM PRO. YELLOW
BW-00QR BONDWISER LAM QUIN RED
VF VERSAFILM PT.MEDIUM PURPLE U
VF VERSAFILM PT.PINK U
VF-0032 VERSAFILM PANTONE 032 RED
VF-PX05 VERSAFILM PRO. MAGENTA
VF VERSAFILM PT.072 U BLUE
VF-X508 VERSAFILM REFLEX BLUE
VF-PX07 VERSAFILM PRO. CYAN
CAS-NO Material Name Lbs HAPs
100-41-4 Ethylbenzene
111-77-3 Diethylene glycol monomethyl ether
111-90-0 Diethylene glycol monoethyl ether
1330-20-7 Xylene
140-88-5 Ethyl acrylate
67-56-1 Methyl alcohol
79-10-7 Acrylic acid
Grand Total
Summary by HAPs
1 2 3 4 5 6 7 8 9 10
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.090 0.315 0.202 0.090 0.000 0.092 0.179 0.090 0.202 0.177
0.045 0.090 0.090 0.000 0.067 0.156 0.134 0.111 0.067 0.034
0.000 0.022 0.000 0.000 0.000 0.046 0.000 0.000 0.000 0.000
0.042 0.083 0.000 0.103 0.000 0.083 0.000 0.040 0.083 0.000
0.090 0.034 0.000 0.000 0.000 0.090 0.000 0.000 0.000 0.000
0.045 0.034 0.000 0.000 0.000 0.088 0.045 0.032 0.000 0.045
0.202 0.269 0.134 0.134 0.336 0.336 0.269 0.269 0.134 0.134
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.487 0.000 0.000 0.000 0.000 0.325 0.325 0.000 0.000 0.000
0.000 1.782 0.000 0.000 0.000 2.376 2.376 0.000 2.376 0.000
0.000 0.000 0.000 0.000 0.000 0.421 0.000 0.000 0.281 0.000
0.000 0.000 0.000 0.000 0.000 0.334 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.412 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.298 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.022 0.045 0.000 0.044 0.000 0.000 0.000 0.000 0.000 0.000
0.023 0.000 0.000 0.000 0.000 0.000 0.000 0.024 0.000 0.000
0.126 0.000 0.213 0.000 0.000 0.000 0.000 0.000 0.326 0.086
0.000 0.441 0.109 0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 2.467 0.000 1.828 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.358 0.000 0.537 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.064 0.000 0.045 0.000 0.000 0.090 0.000 0.000 0.000
0.000 0.040 0.000 0.000 0.000 0.000 0.039 0.000 0.000 0.040
0.000 0.000 0.034 0.000 0.000 0.000 0.000 0.044 0.000 0.000
0.000 0.000 0.000 0.340 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.753 0.000 0.000 0.376 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.034 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.224 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.253 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.656 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 1.229 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.184 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.417 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
1.171 6.042 0.781 3.873 0.403 5.056 3.867 2.971 4.070 0.516
1 2 3 4 5 6 7 8 9 10
0.000 0.004 0.000 0.002 0.000 0.002 0.002 0.001 0.002 0.001
0.485 4.564 0.000 3.390 0.000 4.154 3.057 2.236 3.251 0.000
0.000 0.024 0.000 0.020 0.000 0.000 0.033 0.000 0.000 0.024
0.000 0.004 0.000 0.002 0.000 0.002 0.002 0.001 0.002 0.001
0.000 0.000 0.000 0.000 0.000 0.001 0.000 0.000 0.000 0.000
0.684 1.395 0.781 0.416 0.403 0.891 0.751 0.610 0.812 0.476
0.001 0.052 0.000 0.042 0.000 0.006 0.022 0.123 0.003 0.015
1.171 6.042 0.781 3.873 0.403 5.056 3.867 2.971 4.070 0.516
11 12
0.000 0.000
0.000 0.156
0.034 0.078
0.000 0.000
0.064 0.101
0.022 0.000
0.034 0.034
0.000 0.267
0.000 0.000
0.000 0.000
0.000 0.000
0.000 0.000
0.000 0.000
0.000 0.000
0.000 0.000
0.000 0.000
0.000 0.000
0.000 0.000
0.000 0.000
0.000 0.000
0.000 0.000
0.000 0.000
0.000 0.000
0.000 0.000
0.000 0.000
0.000 0.000
0.000 0.000
0.325 0.000
3.564 2.376
0.000 0.281
0.000 0.334
0.000 0.275
0.000 0.298
0.000 0.000
0.000 0.000
0.000 0.000
0.000 0.000
0.000 0.000
0.000 0.022
0.015 0.000
0.168 0.214
0.000 0.000
0.000 0.624
0.000 0.000
0.035 0.034
0.000 0.000
0.000 0.000
0.000 0.330
0.000 0.774
0.000 0.000
0.000 0.000
0.000 0.000
0.000 0.000
0.000 1.195
0.000 0.179
0.000 0.000
0.000 0.752
0.000 0.000
4.260 8.324
11 12
0.002 0.004 0.021
3.884 7.213 32.234
0.000 0.040 0.142
0.002 0.004 0.021
0.000 0.001 0.002
0.371 0.906 8.496
0.001 0.156 0.419
4.260 8.324
Material Name % VOCs
ADD-X1327 ADDITIVE LOW ODOR PH ADJUSTER 0.0%
ADD-X1410 ADDITIVE SLOW ADDITIVE 0.0%
BW BONDWISER LINE DENSE BLACK 27.7%
BW-0000 DPA-106 LAM. BLACK BONDWISER 68.4%
BW-0001 BONDWISER LAM. OT YELLOW 48.7%
BW-0004 BONDWISER YS RHODAMINE 68.9%
BW-0007 BONDWISER CYAN BLUE 68.7%
BW-0008 BONDWISER LAM.CYAN GREEN 69.6%
BW-0013 BONDWISER YS NAPH.RED 69.4%
BW-0026 DPA-106 LAM. CARBAZOLE VIOLET 74.4%
BW-0030 BONDWISER LAM.DIANISIDENE ORANGE 70.2%
BW-0033 BONDWISER RUBINE RED 70.4%
BW-00QR BONDWISER LAM QUIN RED 72.3%
BW-0873 BONDWISER PT. 873 GOLD 70.9%
BW-0877 DPA-106 PT. 0877 C SILVER INK 56.0%
BW-X023 BONDWISER FAST LAM.LINE EXTENDER 76.9%
BW-X1191 BONDWISER PT. 021 C ORANGE 51.6%
CORE-X00015 CORE SLOW AAOT YELLOW BASE 70.1%
CORE-X00016 CORE SLOW BON RUBINE BASE 66.3%
CORE-X00017 CORE SLOW G/S BLUE BASE 65.0%
CORE-X00038 CORE DIANIS.ORANGE BASE 72.6%
CORE-X00040 CORE Y/S NAPH RED 65.0%
CORE-X00044 CORE CARBAZOLE VIOLET BASE 74.2%
PG3-0802 POWERGLOW PT.802 FLUOR.GREEN 0.0%
PG3-0803 POWERGLOW PT.803 FLUOR.YELLOW 0.0%
PG3-0804 POWERGLOW PT.804 FLUOR.ORANGE 0.0%
PG3-0805 POWERGLOW PT.805 FLUOR.RED 0.0%
PG3-0806 POWERGLOW PT.806 FLUOR.PINK 0.0%
PR-X1077 PROTECH WATER PRIMER 5.9%
PY2-X1022 PYROTECH HR MATTE OPV 65.3%
PY3 PYROTECH PT.021 ORANGE 53.8%
PY3 PYROTECH PT.2747 C BLUE 41.5%
PY3-0000 PYROTECH DENSE BLACK 67.1%
PY3-0001 PYROTECH GS YELLOW 67.0%
PY3-0007 PYROTECH BLUE 65.6%
PY3-0008 PYROTECH GREEN 40.2%
PY3-0013 PYROTECH WARM RED 66.9%
PY3-0026 PYROTECH CARBAZOLE VIOLET 64.8%
PY3-0033 PYROTECH RUBINE RED 61.3%
PY3-P000 PYROTECH PROCESS BLACK 59.7%
VOCs % Summary by product
PY3-PX PYROTECH PROCESS EXTENDER 75.7%
PY3-PX001 PYROTECH PRO. YELLOW SURFACE 68.8%
PY3-PX007 PYROTECH PRO. CYAN SURFACE 64.4%
PY3-PX033 PYROTECH PRO. MAGENTA SURFACE 66.0%
PY3-X010 PYROTECH HI-HEAT OPV *MIX WELL*72.0%
PYG-0013 PYROGLOSS Y/S RED 60.1%
PYG-00QR PYROGLOSS QUIN RED 63.5%
PYG-X001 PYROGLOSS GLOSS HR WHITE 33.6%
PYG-X058 PYROGLOSS COTTONCANDY VEND PINK 63.1%
RX-P001 REXTA R631 US WHITE 33.5%
VERSAFILM PT.375 C GREEN DIGITAL 2.2%
VF VERSAFILM PT.072 U BLUE 1.2%
VF VERSAFILM PT.MEDIUM PURPLE U 3.0%
VF VERSAFILM PT.PINK U 3.4%
VF-0010 VERSAFILM POLY EXTENDER 8.4%
VF-0021 VERSAFILM PANTONE 021 ORANGE 2.3%
VF-0032 VERSAFILM PANTONE 032 RED 2.2%
VF-PX05 VERSAFILM PRO. MAGENTA 3.9%
VF-PX06 VERSAFILM PRO. YELLOW 5.1%
VF-PX07 VERSAFILM PRO. CYAN 4.6%
VF-PX08 VERSAFILM PRO. BLACK 2.4%
VF-S048 VERSAFILM HI OPAQUE WHITE 1.8%
VF-X500 VERSAFILM Y/S NAPHTHOL RED 1.9%
VF-X501 VERSAFILM RUBINE RED BASE 2.2%
VF-X502 VERSAFILM CARBAZOLE VIOLET BASE 2.7%
VF-X503 VERSAFILM YELLOW BASE 1.9%
VF-X504 VERSAFILM GREEN BASE 2.6%
VF-X508 VERSAFILM REFLEX BLUE 1.4%
XJK T PROCESS BLACK I 14.4%
XJK-X016 DPI-182 PROCESS EXTENDER 49.1%
XJK-X023 DPI-182 PROCESS CYAN BLUE 28.3%
XJK-X024 DPI-182 PROCESS YELLOW 73.4%
XJK-X025 DPI-182 PROCESS MAGENTA (NP)25.4%
XJK-X026 DPI-182 PROCESS BLACK 24.5%
Material Name Lbs HAPs 1 2
ADD-X1327 ADDITIVE LOW ODOR PH ADJUSTER 0.000 0.000
ADD-X1410 ADDITIVE SLOW ADDITIVE 0.000 0.000
BW BONDWISER LINE DENSE BLACK 0.000 0.000
BW-0000 DPA-106 LAM. BLACK BONDWISER 191.380 671.881
BW-0001 BONDWISER LAM. OT YELLOW 68.211 136.422
BW-0004 BONDWISER YS RHODAMINE 0.000 0.000
BW-0007 BONDWISER CYAN BLUE 0.000 137.424
BW-0008 BONDWISER LAM.CYAN GREEN 0.000 48.733
BW-0013 BONDWISER YS NAPH.RED 99.284 194.402
BW-0026 DPA-106 LAM. CARBAZOLE VIOLET 208.438 78.164
BW-0030 BONDWISER LAM.DIANISIDENE ORANGE 49.138 98.276
BW-0033 BONDWISER RUBINE RED 98.486 73.864
BW-00QR BONDWISER LAM QUIN RED 0.000 0.000
BW-0873 BONDWISER PT. 873 GOLD 74.448 0.000
BW-0877 DPA-106 PT. 0877 C SILVER INK 232.211 0.000
BW-X023 BONDWISER FAST LAM.LINE EXTENDER 323.024 430.699
BW-X1191 BONDWISER PT. 021 C ORANGE 0.000 727.931
CORE-X00015 CORE SLOW AAOT YELLOW BASE 0.000 0.000
CORE-X00016 CORE SLOW BON RUBINE BASE 0.000 0.000
CORE-X00017 CORE SLOW G/S BLUE BASE 0.000 0.000
CORE-X00038 CORE DIANIS.ORANGE BASE 0.000 50.794
CORE-X00040 CORE Y/S NAPH RED 0.000 0.000
CORE-X00044 CORE CARBAZOLE VIOLET BASE 0.000 77.910
PG3-0802 POWERGLOW PT.802 FLUOR.GREEN 0.000 0.000
PG3-0803 POWERGLOW PT.803 FLUOR.YELLOW 0.000 0.000
PG3-0804 POWERGLOW PT.804 FLUOR.ORANGE 0.000 0.000
PG3-0805 POWERGLOW PT.805 FLUOR.RED 0.000 0.000
PG3-0806 POWERGLOW PT.806 FLUOR.PINK 0.000 0.000
PR-X1077 PROTECH WATER PRIMER 0.000 0.000
PY2-X1022 PYROTECH HR MATTE OPV 1850.450 1370.704
PY3 PYROTECH PT.021 ORANGE 0.000 0.000
PY3 PYROTECH PT.2747 C BLUE 0.000 0.000
PY3-0000 PYROTECH DENSE BLACK 95.922 146.902
PY3-0001 PYROTECH GS YELLOW 0.000 50.901
PY3-0007 PYROTECH BLUE 0.000 45.916
PY3-0008 PYROTECH GREEN 0.000 28.137
PY3-0013 PYROTECH WARM RED 0.000 93.596
PY3-0026 PYROTECH CARBAZOLE VIOLET 0.000 45.370
PY3-0033 PYROTECH RUBINE RED 0.000 46.552
PY3-P000 PYROTECH PROCESS BLACK 125.318 125.318
VOCs # Summary by product
PY3-PX PYROTECH PROCESS EXTENDER 158.990 211.986
PY3-PX001 PYROTECH PRO. YELLOW SURFACE 144.370 121.683
PY3-PX007 PYROTECH PRO. CYAN SURFACE 189.938 90.140
PY3-PX033 PYROTECH PRO. MAGENTA SURFACE 188.638 75.191
PY3-X010 PYROTECH HI-HEAT OPV *MIX WELL*1512.000 1008.000
PYG-0013 PYROGLOSS Y/S RED 0.000 0.000
PYG-00QR PYROGLOSS QUIN RED 0.000 0.000
PYG-X001 PYROGLOSS GLOSS HR WHITE 0.000 0.000
PYG-X058 PYROGLOSS COTTONCANDY VEND PINK 0.000 0.000
RX-P001 REXTA R631 US WHITE 1339.520 3348.800
VERSAFILM PT.375 C GREEN DIGITAL 0.582 0.000
VF VERSAFILM PT.072 U BLUE 0.000 0.000
VF VERSAFILM PT.MEDIUM PURPLE U 0.000 0.000
VF VERSAFILM PT.PINK U 0.000 0.000
VF-0010 VERSAFILM POLY EXTENDER 0.000 4.509
VF-0021 VERSAFILM PANTONE 021 ORANGE 0.000 0.000
VF-0032 VERSAFILM PANTONE 032 RED 0.000 0.000
VF-PX05 VERSAFILM PRO. MAGENTA 0.000 0.000
VF-PX06 VERSAFILM PRO. YELLOW 0.000 0.000
VF-PX07 VERSAFILM PRO. CYAN 0.000 0.000
VF-PX08 VERSAFILM PRO. BLACK 0.000 1.720
VF-S048 VERSAFILM HI OPAQUE WHITE 0.000 2.943
VF-X500 VERSAFILM Y/S NAPHTHOL RED 0.000 0.000
VF-X501 VERSAFILM RUBINE RED BASE 0.000 0.000
VF-X502 VERSAFILM CARBAZOLE VIOLET BASE 0.000 0.491
VF-X503 VERSAFILM YELLOW BASE 0.000 0.000
VF-X504 VERSAFILM GREEN BASE 0.000 0.000
VF-X508 VERSAFILM REFLEX BLUE 0.000 0.000
XJK T PROCESS BLACK I 0.000 20.094
XJK-X016 DPI-182 PROCESS EXTENDER 684.697 0.000
XJK-X023 DPI-182 PROCESS CYAN BLUE 79.918 0.000
XJK-X024 DPI-182 PROCESS YELLOW 310.320 359.473
XJK-X025 DPI-182 PROCESS MAGENTA (NP)106.712 0.000
XJK-X026 DPI-182 PROCESS BLACK 92.039 135.856
8,224.03 10,060.78
3 4 5 6 7 8 9 10
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 19.386 0.000 0.000 0.000 0.000 0.000 0.000
372.752 191.380 0.000 197.532 382.760 191.380 430.605 377.976
136.422 0.000 102.316 237.763 204.632 169.065 102.316 51.158
72.384 0.000 0.000 0.000 0.000 94.444 0.000 0.000
0.000 96.197 0.000 0.000 193.768 0.000 0.000 0.000
0.000 0.000 0.000 99.554 0.000 0.000 0.000 0.000
0.000 242.308 0.000 194.402 0.000 93.729 194.402 0.000
0.000 0.000 0.000 208.438 0.000 0.000 0.000 0.000
0.000 96.872 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 192.751 98.486 71.050 0.000 98.486
0.000 0.000 0.000 0.000 75.912 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 80.829 0.000 0.000
391.682 0.000 0.000 0.000 0.000 0.000 599.273 158.911
215.349 215.349 538.374 538.374 430.699 430.699 215.349 215.349
180.436 0.000 0.000 0.000 0.000 0.000 0.000 0.000
49.070 0.000 0.000 0.000 0.000 0.000 73.605 0.000
0.000 0.000 0.000 0.000 0.000 0.000 46.375 0.000
0.000 0.000 0.000 45.521 0.000 0.000 0.000 0.000
0.000 0.000 0.000 23.494 0.000 0.000 50.794 0.000
0.000 0.000 0.000 45.504 0.000 0.000 0.000 0.000
0.000 0.000 0.000 51.940 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
1.260 0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
1.260 0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 2.076 0.000 0.000 2.135
913.802 913.802 456.901 1641.581 2328.891 689.921 2284.506 2272.757
414.160 0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 436.020 0.000 290.680 581.360 305.214 290.680
634.563 215.993 0.000 193.857 140.865 262.277 140.865 0.000
151.362 0.000 0.000 70.323 90.416 0.000 76.351 72.332
0.000 0.000 0.000 97.736 0.000 137.748 0.000 0.000
0.000 28.137 0.000 0.000 0.000 0.000 0.000 0.000
116.996 0.000 145.743 143.737 0.000 0.000 93.596 0.000
90.739 0.000 0.000 90.739 0.000 90.739 0.000 0.000
42.876 0.000 0.000 85.753 0.000 114.541 0.000 0.000
104.432 0.000 0.000 208.864 167.091 167.091 0.000 0.000
662.456 0.000 0.000 211.986 199.115 0.000 211.986 0.000
96.247 0.000 120.308 190.431 144.370 438.610 0.000 87.997
90.140 0.000 0.000 225.350 247.885 321.285 0.000 182.212
139.829 0.000 92.340 253.935 184.680 184.680 0.000 186.659
2494.800 2318.400 1275.120 3528.000 1562.400 5814.000 0.000 1008.000
0.000 0.000 0.000 0.000 0.000 0.000 42.068 0.000
0.000 0.000 44.428 0.000 0.000 0.000 0.000 0.000
672.280 0.000 0.000 0.000 0.000 0.000 0.000 168.070
0.000 0.000 0.000 44.162 0.000 0.000 0.000 0.000
2962.320 1481.160 2009.280 4038.653 2695.784 2679.040 4004.495 2718.556
0.000 0.000 0.000 0.388 0.388 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.219 0.000
0.000 0.000 0.000 0.000 0.000 0.266 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.301 0.000 0.000
0.000 0.000 0.000 6.012 6.012 0.000 6.012 0.000
0.000 0.405 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.797 0.000 0.000
0.000 0.000 0.000 0.000 0.000 1.424 0.000 0.000
0.000 1.821 0.000 0.000 0.911 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 1.672 0.000 0.000 1.720
0.000 2.180 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.525 0.000 0.000 0.350 0.000
0.000 0.000 0.000 0.403 0.000 0.000 0.000 0.000
0.000 0.639 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.505 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.470 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.516 0.000
60.281 0.000 0.000 0.000 0.000 0.000 0.000 0.000
377.933 0.000 343.575 512.909 549.721 549.721 584.078 0.000
99.189 0.000 99.189 178.541 317.406 0.000 276.313 119.594
256.766 0.000 513.533 1001.389 717.478 308.120 770.299 300.783
87.911 0.000 88.927 231.210 284.566 0.000 142.283 142.283
0.000 0.000 51.405 374.276 425.192 51.405 428.374 0.000
11,889.70 5,824.03 6,317.46 15,167.00 11,743.85 13,524.52 11,080.24 8,455.66
11 12 Material Name
0.000 0.000 ADD-X1327 ADDITIVE LOW ODOR PH ADJUSTER
0.000 0.000 ADD-X1410 ADDITIVE SLOW ADDITIVE
0.000 0.000 BW BONDWISER LINE DENSE BLACK
0.000 332.865 BW-0000 DPA-106 LAM. BLACK BONDWISER
51.158 119.369 BW-0001 BONDWISER LAM. OT YELLOW
0.000 0.000 BW-0004 BONDWISER YS RHODAMINE
74.209 72.148 BW-0007 BONDWISER CYAN BLUE
0.000 0.000 BW-0008 BONDWISER LAM.CYAN GREEN
149.967 237.448 BW-0013 BONDWISER YS NAPH.RED
52.109 0.000 BW-0026 DPA-106 LAM. CARBAZOLE VIOLET
0.000 49.138 BW-0030 BONDWISER LAM.DIANISIDENE ORANGE
73.864 73.864 BW-0033 BONDWISER RUBINE RED
0.000 0.000 BW-00QR BONDWISER LAM QUIN RED
49.632 0.000 BW-0873 BONDWISER PT. 873 GOLD
309.428 393.360 BW-0877 DPA-106 PT. 0877 C SILVER INK
0.000 428.391 BW-X023 BONDWISER FAST LAM.LINE EXTENDER
0.000 0.000 BW-X1191 BONDWISER PT. 021 C ORANGE
0.000 0.000 CORE-X00015 CORE SLOW AAOT YELLOW BASE
0.000 0.000 CORE-X00016 CORE SLOW BON RUBINE BASE
45.521 0.000 CORE-X00017 CORE SLOW G/S BLUE BASE
0.000 0.000 CORE-X00038 CORE DIANIS.ORANGE BASE
0.000 0.000 CORE-X00040 CORE Y/S NAPH RED
51.940 0.000 CORE-X00044 CORE CARBAZOLE VIOLET BASE
0.000 0.000 PG3-0802 POWERGLOW PT.802 FLUOR.GREEN
0.000 0.000 PG3-0803 POWERGLOW PT.803 FLUOR.YELLOW
0.000 0.000 PG3-0804 POWERGLOW PT.804 FLUOR.ORANGE
0.000 0.000 PG3-0805 POWERGLOW PT.805 FLUOR.RED
0.000 0.000 PG3-0806 POWERGLOW PT.806 FLUOR.PINK
0.000 2.135 PR-X1077 PROTECH WATER PRIMER
913.802 913.802 PY2-X1022 PYROTECH HR MATTE OPV
0.000 0.000 PY3 PYROTECH PT.021 ORANGE
436.020 0.000 PY3 PYROTECH PT.2747 C BLUE
187.820 0.000 PY3-0000 PYROTECH DENSE BLACK
0.000 0.000 PY3-0001 PYROTECH GS YELLOW
0.000 0.000 PY3-0007 PYROTECH BLUE
0.000 0.000 PY3-0008 PYROTECH GREEN
93.596 0.000 PY3-0013 PYROTECH WARM RED
45.370 0.000 PY3-0026 PYROTECH CARBAZOLE VIOLET
42.876 0.000 PY3-0033 PYROTECH RUBINE RED
0.000 0.000 PY3-P000 PYROTECH PROCESS BLACK
Pounds purchased Summary by product
0.000 0.000 PY3-PX PYROTECH PROCESS EXTENDER
0.000 0.000 PY3-PX001 PYROTECH PRO. YELLOW SURFACE
0.000 0.000 PY3-PX007 PYROTECH PRO. CYAN SURFACE
0.000 0.000 PY3-PX033 PYROTECH PRO. MAGENTA SURFACE
2268.000 0.000 PY3-X010 PYROTECH HI-HEAT OPV *MIX WELL*
0.000 0.000 PYG-0013 PYROGLOSS Y/S RED
0.000 0.000 PYG-00QR PYROGLOSS QUIN RED
0.000 0.000 PYG-X001 PYROGLOSS GLOSS HR WHITE
0.000 0.000 PYG-X058 PYROGLOSS COTTONCANDY VEND PINK
2009.280 2679.040 RX-P001 REXTA R631 US WHITE
0.388 0.000 VERSAFILM PT.375 C GREEN DIGITAL
0.000 0.213 VF VERSAFILM PT.072 U BLUE
0.000 0.000 VF VERSAFILM PT.MEDIUM PURPLE U
0.000 0.000 VF VERSAFILM PT.PINK U
9.017 6.012 VF-0010 VERSAFILM POLY EXTENDER
0.000 0.393 VF-0021 VERSAFILM PANTONE 021 ORANGE
0.000 0.000 VF-0032 VERSAFILM PANTONE 032 RED
0.000 1.386 VF-PX05 VERSAFILM PRO. MAGENTA
0.000 1.872 VF-PX06 VERSAFILM PRO. YELLOW
0.000 1.643 VF-PX07 VERSAFILM PRO. CYAN
0.000 0.000 VF-PX08 VERSAFILM PRO. BLACK
0.000 0.745 VF-S048 VERSAFILM HI OPAQUE WHITE
0.000 0.350 VF-X500 VERSAFILM Y/S NAPHTHOL RED
0.000 0.403 VF-X501 VERSAFILM RUBINE RED BASE
0.000 0.000 VF-X502 VERSAFILM CARBAZOLE VIOLET BASE
0.000 0.337 VF-X503 VERSAFILM YELLOW BASE
0.000 0.362 VF-X504 VERSAFILM GREEN BASE
0.000 0.000 VF-X508 VERSAFILM REFLEX BLUE
0.000 0.000 XJK T PROCESS BLACK I
274.860 274.860 XJK-X016 DPI-182 PROCESS EXTENDER
138.865 119.027 XJK-X023 DPI-182 PROCESS CYAN BLUE
359.473 304.451 XJK-X024 DPI-182 PROCESS YELLOW
88.927 108.237 XJK-X025 DPI-182 PROCESS MAGENTA (NP)
430.577 84.696 XJK-X026 DPI-182 PROCESS BLACK
8,156.70 6,206.55
Lbs HAPs 1 2 3 4 5 6 7
0.000 0.000 0.000 64.000 0.000 0.000 0.000
420.000 0.000 140.000 140.000 216.000 280.000 210.000
0.000 0.000 0.000 70.000 0.000 0.000 0.000
280.000 983.000 630.000 280.000 0.000 289.000 560.000
140.000 280.000 280.000 0.000 210.000 488.000 420.000
0.000 0.000 105.000 0.000 0.000 0.000 0.000
0.000 200.000 0.000 140.000 0.000 0.000 282.000
0.000 70.000 0.000 0.000 0.000 143.000 0.000
143.000 280.000 0.000 349.000 0.000 280.000 0.000
280.000 105.000 0.000 0.000 0.000 280.000 0.000
70.000 140.000 0.000 138.000 0.000 0.000 0.000
140.000 105.000 0.000 0.000 0.000 274.000 140.000
0.000 0.000 0.000 0.000 0.000 0.000 105.000
105.000 0.000 0.000 0.000 0.000 0.000 0.000
415.000 0.000 700.000 0.000 0.000 0.000 0.000
420.000 560.000 280.000 280.000 700.000 700.000 560.000
0.000 1412.000 350.000 0.000 0.000 0.000 0.000
0.000 0.000 70.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 70.000 0.000
0.000 70.000 0.000 0.000 0.000 35.000 0.000
0.000 0.000 0.000 0.000 0.000 70.000 0.000
0.000 105.000 0.000 0.000 0.000 70.000 0.000
0.000 0.000 20.000 0.000 0.000 0.000 0.000
0.000 0.000 18.000 0.000 0.000 0.000 0.000
0.000 0.000 18.000 0.000 0.000 0.000 0.000
0.000 0.000 18.000 0.000 0.000 0.000 0.000
0.000 0.000 18.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 35.000
2835.000 2100.000 1400.000 1400.000 700.000 2515.000 3568.000
0.000 0.000 770.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 1050.000 0.000 700.000
143.000 219.000 946.000 322.000 0.000 289.000 210.000
0.000 76.000 226.000 0.000 0.000 105.000 135.000
0.000 70.000 0.000 0.000 0.000 149.000 0.000
0.000 70.000 0.000 70.000 0.000 0.000 0.000
0.000 140.000 175.000 0.000 218.000 215.000 0.000
0.000 70.000 140.000 0.000 0.000 140.000 0.000
0.000 76.000 70.000 0.000 0.000 140.000 0.000
210.000 210.000 175.000 0.000 0.000 350.000 280.000

210.000 280.000 875.000 0.000 0.000 280.000 263.000
210.000 177.000 140.000 0.000 175.000 277.000 210.000
295.000 140.000 140.000 0.000 0.000 350.000 385.000
286.000 114.000 212.000 0.000 140.000 385.000 280.000
2100.000 1400.000 3465.000 3220.000 1771.000 4900.000 2170.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 70.000 0.000 0.000
0.000 0.000 2000.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 70.000 0.000
4000.000 10000.000 8000.000 4000.000 6000.000 12060.000 8050.000
27.000 0.000 0.000 0.000 0.000 18.000 18.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 54.000 0.000 0.000 0.000 72.000 72.000
0.000 0.000 0.000 18.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 36.000 0.000 0.000 18.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 72.000 0.000 0.000 0.000 0.000 70.000
0.000 162.000 0.000 120.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 27.000 0.000
0.000 0.000 0.000 0.000 0.000 18.000 0.000
0.000 18.000 0.000 27.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 27.000 0.000
0.000 0.000 0.000 0.000 0.000 18.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.000 140.000 420.000 0.000 0.000 0.000 0.000
1395.000 0.000 770.000 0.000 700.000 1045.000 1120.000
282.000 0.000 350.000 0.000 350.000 630.000 1120.000
423.000 490.000 350.000 0.000 700.000 1365.000 978.000
420.000 0.000 346.000 0.000 350.000 910.000 1120.000
376.000 555.000 0.000 0.000 210.000 1529.000 1737.000
15,625.00 20,943.00 23,617.00 10,674.00 13,560.00 30,863.00 24,816.00

8 9 10 11 12
0.000 64.000 0.000 32.000 64.000
162.000 0.000 140.000 210.000 140.000
0.000 0.000 0.000 0.000 0.000
280.000 630.000 553.000 0.000 487.000
347.000 210.000 105.000 105.000 245.000
137.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 108.000 105.000
0.000 0.000 0.000 0.000 0.000
135.000 280.000 0.000 216.000 342.000
0.000 0.000 0.000 70.000 0.000
0.000 0.000 0.000 0.000 70.000
101.000 0.000 140.000 105.000 105.000
0.000 0.000 0.000 0.000 0.000
114.000 0.000 0.000 70.000 0.000
0.000 1071.000 284.000 553.000 703.000
560.000 280.000 280.000 0.000 557.000
0.000 0.000 0.000 0.000 0.000
0.000 105.000 0.000 0.000 0.000
0.000 70.000 0.000 0.000 0.000
0.000 0.000 0.000 70.000 0.000
0.000 70.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 70.000 0.000
0.000 0.000 20.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000
0.000 0.000 18.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000
0.000 0.000 18.000 0.000 0.000
0.000 0.000 36.000 0.000 36.000
1057.000 3500.000 3482.000 1400.000 1400.000
0.000 0.000 0.000 0.000 0.000
1400.000 735.000 700.000 1050.000 0.000
391.000 210.000 0.000 280.000 0.000
0.000 114.000 108.000 0.000 0.000
210.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000
0.000 140.000 0.000 140.000 0.000
140.000 0.000 0.000 70.000 0.000
187.000 0.000 0.000 70.000 0.000
280.000 0.000 0.000 0.000 0.000
0.000 280.000 0.000 0.000 0.000
638.000 0.000 128.000 0.000 0.000
499.000 0.000 283.000 0.000 0.000
280.000 0.000 283.000 0.000 0.000
8075.000 0.000 1400.000 3150.000 0.000
0.000 70.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000
0.000 0.000 500.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000
8000.000 11958.000 8118.000 6000.000 8000.000
0.000 0.000 0.000 18.000 0.000
0.000 18.500 0.000 0.000 18.000
9.000 0.000 0.000 0.000 0.000
9.000 0.000 0.000 0.000 0.000
0.000 72.000 0.000 108.000 72.000
0.000 0.000 0.000 0.000 17.500
36.000 0.000 0.000 0.000 0.000
37.000 0.000 0.000 0.000 36.000
0.000 0.000 0.000 0.000 37.000
0.000 0.000 0.000 0.000 36.000
0.000 0.000 72.000 0.000 0.000
0.000 0.000 0.000 0.000 41.000
0.000 18.000 0.000 0.000 18.000
0.000 0.000 0.000 0.000 18.000
0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 18.000
0.000 0.000 0.000 0.000 18.000
0.000 36.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000
1120.000 1190.000 0.000 560.000 560.000
0.000 975.000 422.000 490.000 420.000
420.000 1050.000 410.000 490.000 415.000
0.000 560.000 560.000 350.000 426.000
210.000 1750.000 0.000 1759.000 346.000
24,834.00 25,456.50 18,060.00 17,544.00 14,750.50
Week 1 2 3 4 5 6 7
Weekly Hours worked 144 192 192 192 192 192 192
Weekly available hours 288 336 336 336 336 336 336
8 9 10 11 12 13 14 15 16 17
192 192 192 192 192 192 144 192 192 192
336 336 336 336 336 336 288 336 336 336
18 19 20 21 22 23 24 25 26 27
192 192 192 192 144 192 192 192 144 192
336 336 336 336 288 336 336 336 288 336
28 29 30 31 32 33 34 35 36 37
192 192 192 192 192 192 192 144 192 192
336 336 336 336 336 336 336 288 336 336
38 39 40 41 42 43 44 45 46 47
192 192 192 192 192 192 192 192 192 192
336 336 336 336 336 336 336 336 336 336
48 49 50 51 52 Total hours
144 192 192 192 96 9600
Available hours
240 336 336 336 240 17040