DERR-2024-005513

195 North 1950 West • Salt Lake City, UT
Mailing Address: P.O. Box 144840 • Salt Lake City, UT 84114-4840
Telephone [phone] • Fax [phone] • T.D.D. [phone]
www.deq.utah.gov
Printed on 100% recycled paper
State of Utah
SPENCER J. COX
Governor

DEIDRE HENDERSON
Lieutenant Governor
Department of
Environmental Quality

Kimberly D. Shelley
Executive Director

DIVISION OF ENVIRONMENTAL
RESPONSE AND REMEDIATION

Brent H. Everett
Director
ERRP-096-24
April 2, 2024
Danny Patten
Lee’s Roundup No. 1 of Lehi, Inc.
1531 North State Street
Lehi, Utah 84043

Re: Closure Plan Approval for Petroleum Storage Tank Lines
Lee’s Roundup of Lehi, located at 1531 North State Street, Lehi, Utah
Facility Identification No. 1000723
Dear Mr. Patten:
The Closure Plan for the above-referenced facility, received by the Division of
Environmental Response and Remediation (DERR) on March 5, 2024, has been approved subject
to the noted modifications, if any. The DERR office must be notified three business days before
beginning closure activities. The local fire department and other local agencies may have additional
requirements for closure or may charge inspection fees.

The Closure Plan Approval is effective for a period of one year from the date of approval.
If closure does not take place within one year, submittal of a new Closure Plan will be required,
unless otherwise approved by the Division Director.

Any change to the approved Closure Plan must be submitted, in writing, and approved by
the Division Director before implementation. If contamination is suspected or found during closure
activities, you must report it to the DERR at [phone] within 24 hours of discovery.
Enclosed is a copy of the Closure Notice Form, which must be completed and submitted to
the Division Director after the closure is performed. Please submit the environmental and Unified
Soil Classification sample analysis data and chain-of-custody forms with the closure notice as soon
as possible, but no later than 90 days after tank closure. Also, a final Site Plat that meets the
requirements outlined in R311-204-4(2)(b) must be submitted with the closure notice.
Facility ID# 1000723
Page 2
195 North 1950 West • Salt Lake City, UT
Mailing Address: P.O. Box 144840 • Salt Lake City, UT 84114-4840
Telephone [phone] • Fax [phone] • T.D.D. [phone]
www.deq.utah.gov
Printed on 100% recycled paper
If you have additional questions, please contact Laura Perdue, the DERR project manager,
at [phone].
Sincerely,

Brent H. Everett, Director
Division of Environmental Response and Remediation
BHE/LP/ta
Enclosure: Closure Notice Form
cc:Eric Edwards, Executive Director, Utah County Health Department
Jeremy L. Craft, Fire Chief, Lehi Fire Department
if
~ ~
J

1
UNDERGROUND STORAGE TANK CLOSURE PLAN (rev. 7/13) FACILITY ID# 1000723 …
LHD USE ONLY
Date Received
Reviewer
Date LHD Approved
Date mailed to State
Closure Plan prepared at the request of the owner/operator (identified below) by Russell J. Hicks
of (company name) Push Drilling, LLC Phone # [phone]
Address 852 Chelsea Dr.City Bountiful StateUT Zip84010
A Contractor may prepare this Closure Plan as the owner/operator's agent. In preparing the Closure Plan, the Contractor must act with
the owner/operator's knowledge and approval. The owner/operator must sign the Closure Plan.Submit Closure Plan to: DERR/UST,
P.O. Box 144840, Salt Lake City, Utah, 84114-4840
This Closure Plan is submitted in compliance with the requirements contained in 40 CFR 280 Subpart G and R311-204 (U.A.C.)
Piping closure only Tank # 1 2 3 4
Tank Type (Steel,FRP,etc.)FRP FRP FRP FRP
Piping Type (Steel,FRP,etc.)Flex Flex Flex Flex
Date Installed 11/2/95 11/2/95 11/2/95 11/2/95
Capacity 8,000 12,000 10,000 10,000
Substance stored*Gas Gas Diesel Diesel
Date last operated Current Current Current Current
Removal/In Place/Change in
Service (CIS)?
*Indicate the specific substance stored in each tank to be closed (gasoline, diesel, new oil, waste oil, etc.)
For waste oil tanks:Have degreasing or other types of solvents been stored or mixed with the waste oil?
Yes (identify if known) NA .No Not Known
Analysis for lead or other contaminants may be required prior to disposal of contaminated soil or other material. (Check with your
disposal facility.)
STATE USE ONLY
Date Received
Date Mailed to LHD
Date Received From LHD
Reviewer/Date Approved
Mgr. Review/Date
FACILITY INFORMATION
Tank Owner Lees Roundup No 1 of Lehi Inc.Phone # [phone]
Address 1531 N State City Lehi
State
UT Zip 84043
Facility Name Lee's Round-Up No 1 of Lehi
Address 1531 N State City Lehi
State
UT Zip 84043
Contact person Danny Patten Phone # [phone]
Total number of regulated underground tanks at this site 4
Total number of regulated underground tanks at this site to be closed 0
03/05/24
Laura Perdue 03/07 /24
I
I I I
I I
I I
~1
□ □
2
Before the closure plan is submitted for approval, the local health and fire departments where the facility is located
must be contacted.
CONTACT LOCAL HEALTH DISTRICT: Name of Dist. UT DERR Date 3/4/24
Contact Laura Perdue Title Environmental Scientist Phone# [phone]
CONTACT LOCAL FIRE DEPT. Name of Dept. Lehi Fire Dept.Date 3/4/24
Contact Garion Rowett Title Fire Inspector Phone# [phone]
DISPOSAL INFORMATION
Tank(s)will be disposed at: Facility Construction Waste Management
Address 7213 W. California Ave.City Salt Lake City State UT Zip 84104
Contact person Scale House Phone# [phone]
Product lines will either be: removed or cleaned, secured in place, and capped.
Vent lines will either be: removed or cleaned and secured open.
Piping will be disposed at: Facility Construction Waste Management
Address 7213 W. California Ave.City Salt Lake City State UT Zip 84104
Contact person Scale House Phone# [phone]
Tank(s) will be emptied by: company NA Phone#
Tank(s) will be cleaned by: company Phone#
Contaminated water in the tank/rinsate will be disposed at: Facility
Contact person Phone#
Tank(s)will be: purged or rendered inert by the following method:
Residual sludges will be disposed at the following facility:
Address City State Zip
Contact person Phone#
FOR CLOSURE IN PLACE ONLY
For this closure method, you are subject to the requirements of UAC R315-302-2(6), which requires annotating the property title and
submitting documentation to the Division of Solid and Hazardous Waste (DSHW). For information on how to comply with these
requirements, contact the DSHW Solid Waste Landfills Section Manager at [phone].
Approval for in-place closure has been granted by the Local Fire Department. (Must submit approval in writing with Closure Plan)
Fire Dept. Phone# Contact person Date
Approval for in-place closure has been granted by the Local Health Department.
Health Dept. Phone# Contact person Date
Substance to be used to fill tanks:
TANK REMOVER Name Russell J. Hicks Cert. # TR0404 Exp. Date 10/16/24
Company Push Drilling, LLC Phone # [phone]
Address 852 Chelsea Dr.City Bountiful State UT Zip 84010
SOIL/GROUNDWATER SAMPLER Name Russell J. Hicks Cert. # GS1288 Exp. Date 2/15/26
Company Push Drilling, LLC Phone # [phone]
Address 852 Chelsea Dr.City Bountiful State UT Zip 84010
I I
I I
I I
I I
I
I
I
I
I I I
~ □
□ □
I I I
□ □
I I I
□
I I I
□
I I I
3
SITE ASSESSMENT
A site assessment must be performed for all UST closures and change-in-service. Site assessments must be performed as outlined in 40 CFR
280.72 and R311-205 (U.A.C.). If contamination is suspected, additional samples must be collected at the location where contamination is
most likely to be present. If groundwater is encountered, a soil sample must be collected, in the unsaturated zone, in addition to each
groundwater sample. Soil and groundwater samples must be analyzed for the compounds shown in the following table, using appropriate lab
methods.
Substance or
Product Type
Contaminant Compounds to be Analyzed for Each
Substance or Product Type
ANALYTICAL METHODS1
Soil, Groundwater
or Surface Water
Gasoline
Total Petroleum Hydrocarbons (purgeable TPH as gasoline
range organics C6 - C10)
EPA 8015 or EPA 8260
Benzene, Toluene, Ethyl benzene, Xylenes, Naphthalene,
(BTEXN) and MTBE
EPA 8021 or EPA 8260
Diesel
Total Petroleum Hydrocarbons (extractable TPH as diesel
range organics C10 – C28)
EPA 8015
Benzene, Toluene, Ethyl benzene, Xylenes, and Naphthalene
(BTEXN)
EPA 8021 or EPA 8260
Used Oil
Oil and Grease (O&G) or
Total Recoverable Petroleum Hydrocarbons (TRPH)
EPA 1664 or
EPA 1664 (SGT*)
Benzene, Toluene, Ethyl benzene, Xylenes, Naphthalene
(BTEXN) & MTBE; and Halogenated Volatile Organic
Compounds (VOX)
EPA 8021 or EPA 8260
New Oil Oil and Grease (O&G) or
Total Recoverable Petroleum Hydrocarbons (TRPH)
EPA 1664 or
EPA 1664 (SGT*)
Other Type of analyses will be based upon the substance or product
stored, and as approved by the DERR Division Director
Method will be based upon the
substance or product type
Unknown
Total Petroleum Hydrocarbons (purgeable TPH as gasoline
range organics C6 - C10)
EPA 8015 or EPA 8260
Total Petroleum Hydrocarbons (extractable TPH as diesel
range organics C10 – C28)
EPA 8015
Oil and Grease (O&G) or
Total Recoverable Petroleum Hydrocarbons (TRPH)
EPA 1664 or
EPA 1664 (SGT*)
Benzene, Toluene, Ethyl benzene, Xylenes, and Naphthalene
(BTEXN) and MTBE; and Halogenated Volatile Organic
Compounds (VOX)
EPA 8021 or EPA 8260
1 The following modifications to these certified methods are considered acceptable by the DERR Division Director:
Dual column confirmation may not be required for TPH and BTEXN/MTBE analysis.
A micro-extraction or scale-down technique may be used for aqueous samples, but only for the determination of extractable TPH as diesel range
organics (C10 – C28).
Hexane may be used as an extraction solvent.
*Silica Gel Treatment (SGT) may be used in the determination of Total Recoverable Petroleum Hydrocarbons.
NOTE: The sample preparation method and any modification(s) to a certified method must be reported by the laboratory.
•
•
•
•
4
CONTAMINATED MATERIALS MUST BE DISPOSED AT AN ACCEPTABLE FACILITY:
All materials generated from UST closures must be managed and disposed in a manner that does not place those materials in direct contact
with the environment. On-site stockpiling of contaminated soils may be required prior to any soil management activities. Any person
providing remedial assistance for a fee, including aeration and over-excavation (of more than 50 yd 3), must be a Certified UST Consultant.
Contaminated soils generated as part of tank removal are to be disposed at the following facility: ET Technologies
Address 6030 W. California Ave.City Salt Lake City
State
UT Zip 84104
Contact person Ted Sonnenburg Phone [phone]
Complete the Facility Site Plat and Sample Information Table on pages 4 and 5 to provide site assessment information.
CONTAMINATION INFORMATION
If contamination at the facility is suspected or confirmed, the information must be reported to the DERR Division Director at (801) 536-
4100 within 24 hours. The Division of Water Quality must be notified at [phone] if Free Product is encountered or if surface water
has been impacted. If contamination is confirmed, any person assisting in the remediation process for a fee must be a Certified UST
Consultant.
SAMPLE INFORMATION TABLE
Complete table for all samples to be taken for closure.
1 Soil (SS), Groundwater (GW), or Unified Soil Classification (USC).
2 Approx. depth in feet below grade. The required minimum site assessment samples must be taken at 0-2 feet below the backfill/native soil interface.3 Contaminant compounds to be analyzed for each sample (from table on p. 3).
4 Appropriate analysis methods for contaminant compound(s) in each sample (from table on p. 3).
Sample
#
Substance
stored in
tank
Sample
type1 Depth2 Compounds3 Analysis method(s)4
SS-1 Gas SS 3-5' MBTEXN, TPH-GRO 8260B
SS-2 Gas SS 3-5' Same Same
USC-1 USC 3-5' Soil Class USC
Facility Site Plat (Closure Plan)
The site plat must be drawn to an appropriate identified scale. It must show planned sampling locations, substances stored in tanks, and
other relevant information. Tank and sample identification numbers must be consistent with the information given on pages 1 anl 4 of the
Closure Plan.
Lee's Round-Up No. 1
1531 N. State
Lehi, UT 84043
1500 North
I Facility ID: 1000723 I Drawn By: R. Hicks
X = Sample locations (SS-#, WS-#, USC-#)
•=Monitoring Wells (MW-#)
O= Soil boring (SB-#), or Geoprobe Boring (GP-#)
a = Water Wells ( domestic, livestock, etc.)
Slope of Surface Topography: (N,NW,W,SW,S,SE,E,NE)
Land Use At Site: _Residential _Commercial _Industrial
Surrounding Land: _Residential _Commercial _Industrial
North
~
5
Scale: 1"= 40 Feet
I Date: 3-4-24
Site Plat Must Indicate Approximate Locations of:
-Current & former tanks, piping & dispensers
-Location of all samples to be taken
-Buildings, fences, & property boundaries
-Utility conduits (sewers, gas, water, storm drains, electrical, etc.)
Approximate depth to groundwater in the vicinity of the tanks:~ 12feet.
Regional groundwater flow direction: S
State Certified Laboratory to be used : Chemtech-Ford Laboratories
I City Sandy
State I Zip 84070 Address 9632 S. 500 W. UT
Contact Person Mark Broadhead Phone [phone]
Please explain any unusual or extenuating circumstances expected regarding the site assessment or closure:
Replacing reJ;!ular unleaded line and rubber boots between dispenser pumps 5/6
and 7/8.
I certify under penalty of law that I am the owner/operator of the tank(s) referenced above and that I am familiar with
the information on this form and that it is true, accurate and complete, and further, that the procedures described herein
will be followed during tank closure.
Signature of tank owner
Full Name of tank owner
6