DAQ-2025-000200

195 North 1950 West • Salt Lake City, UT
Mailing Address: P.O. Box 144820 • Salt Lake City, UT 84114-4820
Telephone [phone] • Fax [phone] • T.D.D. [phone]
www.deq.utah.gov
Printed on 100% recycled paper
State of Utah

Department of
Environmental Quality

Kimberly D. Shelley
Executive Director

DIVISION OF AIR QUALITY
Bryce C. Bird
Director

SPENCER J. COX
Governor

DEIDRE HENDERSON
Lieutenant Governor
DAQC-1258-24
Site ID 16186 (B1)

Quin Bingham
Granite Construction Company
1000 North Warm Springs Road
Salt Lake City, UT 84116-2321

Dear Mr. Bingham:

Re: Granite Construction Company – Temporary Relocation/Operation, Notice of Intent
– Tooele County

Your Notice of Intent dated December 19, 2024, to relocate portable aggregate equipment to the
temporary project for Granite Construction Company’s Coyote Pit, located at Highway 36 and
Center Street, Stansbury Park, UT, was received by the Utah Division of Air Quality (DAQ) and
has been reviewed.

The following equipment has been approved for operation for this temporary project:

McCloskey track mounted jaw crusher with 280 kW diesel fueled engine
McCloskey track mounted screen
Stacker

This equipment has been permitted for portable operations in the State of Utah by the Approval
Order (AO) DAQE-AN127270014-19, dated February 27, 2019. The referenced location is a
permanent aggregate facility with established production limits and operating conditions. All
equipment operating at this site shall be in compliance with the AO DAQE-AN161860001-24,
dated October 7, 2024. The production from the temporary equipment, when combined with the
permanent equipment located at this site, cannot exceed the 12-month rolling total sited on
II.B.2.a of this AO. The diesel fueled engine shall operate in accordance with Conditions II.B.5.b.
through II.B.5.b.2 and II.B.5.e through II.B.5.e.2

The owner/operator shall maintain records of the actual operation hours, days, and production
rate, of the above referenced equipment at this relocation site and have the ability to submit the
information to the DAQ upon the request of representatives of the director. Please make certain
that the plant operator is aware of all the location specific requirements for this site and the
conditions of the aforementioned AO.
+ 2 / 6 Ú Ý Û Ù Û Þ
DAQC-1258-24
Page 2

Federal New Source Performance Standards Subpart OOO requires that initial Method 9
observations be performed for all applicable portable crushers, screens, and attached conveyors.
Subpart OOO also mandates that all crushers constructed, modified, or reconstructed on or after
April 22, 2008, which are not enclosed, must install spray bars on the equipment and keep
maintenance records to ensure proper spray bar operations.

Utah Division of Water Quality Storm Water Permits and regulations may apply to this temporary
project. Please refer to Utah DEQ Water Quality’s current Storm Water Construction
requirements for additional information.

This approval for relocation in no way releases the owner or operator from any liability for
compliance with all other applicable federal, state, and local regulations including the UAC.

If you have any questions regarding this relocation authorization or the temporary relocation
process please contact Susan Weisenberg at [phone].

Sincerely,

Jay P. Morris
Assistant Director

JPM:SW:jl

Enclosure: Submitted Temporary Relocation Form
Email Correspondence

cc: Tooele County Health Department
4 * - - $ . — ) @ B v A ? A D @ A w B @ ˜
Susan Weisenberg <[e-mail]>
Portable/Temporary Relocation Form
1 message
[e-mail] <[e-mail]>Thu, Dec 19, 2024 at 9:05 AM
Reply-To: [e-mail]
To: [e-mail]
Susan/Chad:
Site # -- Granite Construction Company has requested a Temporary Relocation. Please see the information below. Any
attachments can be access by clicking on the links.

Recipient Data:
Time Finished: 2024-12-19 09:05:34 MST
IP: 161.69.91.46
ResponseID: R_6CByqYzZ0aC5MGC
Link to View Results: Click Here
URL to View Results: https://utahgov.iad1.qualtrics.com/apps/single-response-reports/reports/
nDEOB9AJyNa56edChN3yAn4iJtCTdwr6W8gMSZSQhNq2vD1OukEBDP47OM9yomXWNXrFQvxlggkmSi0TGlyr%
2EtbbhWrJmKvhDC%2EmORVuiGCAKKvezISBh4lks0Pg7aYjmacE8XXzulZUjUSHGF5-nipj6od0gYFoE3INRIxr8-
iZz4b2woUUQ8%2EayOQDEV8%2EY8QJzqYzXu-m72qtPeptGqdV7djxNXt1StEbkguqTqK6q-uBE%
2EPMWca9ceTBcPCRyjZc4sFibQLpK71RChfZOpx-AcIFK8VRjZfeGXV8NLRhlefpJuovcc
m3NV7KLMKdlFUw0s4gW7rbK0jG9T7Aag
Response Summary:
Please fill out the information below:
Contact Person: Quin Bingham
Company Name: Granite Construction Company
Mailing Address: 1000 N Warm Springs Road
City: Salt Lake City
Zip: 84116
Phone Number: 4357704319
Email: [e-mail]
Is the site located within a PM2.5 non-attainment and maintenance plan areas on cleared land grea...
Yes
All temporary relocation projects are required to submit a Fugitive Dust Control Plan (FDCP). Lo...
61EE9E0AFE
Briefly give directions to the site and/or physical address:
HWY 36 & Center Street, Stansbury Park, UT
Proposed Relocation Information:
Closest City Stansbury Park
County Tooele
UTM X Coordinates 40.650959
UTM Y Coordinates -112.283220
Approximate distance to the nearest house/business 2000 FT
UTM X Coordinates to nearest house/business 40.652180
UTM Y Coordinates to nearest house/business -112.290010
Does this site currently have a permit with DAQ?
12/24/24, 10:50 AM State of Utah Mail - Portable/Temporary Relocation Form
https://mail.google.com/mail/u/0/?ik=bffac613d3&view=pt&search=all&permthid=thread-f:1818885464937656073%7Cmsg-f:1818885464937656073&s…1/2
Yes
If yes, what is the Permit (DAQ-AN) # ?
DAQE-AN161860001-24
If yes, what is the Permit Holder's Name?
Granite Construction Company
Please provide the permit ID for the equipment? (DAQE-XXXXXXXXX-XX)
DAQE-AN127270014-19
Please list all the Equipment on Site:Note: It is important to identify ALL diesel powered engine...
1
Equipment Type trackmounteded screen
Make/Model McCloskey R155 Screen
Design Capacity 400 TPH
2
Equipment Type Trackmounted Jaw Crusher
Make/Model McCloskey J50 Jaw Crusher
Design Capacity 400 TPH
3
Equipment Type Stacker
Make/Model McCloskey Stacker ST100
Design Capacity 400 TPH
Please attach a site diagram showing the equipment layout and general site dimensions for this re...
https://utahgov.co1.qualtrics.com/WRQualtricsControlPanel/File.php?F=F_2Eu9OQfYW1vLVQC
Have any other state or local regulatory agencies issued any other "Conditional Use Permits" for...
No
Operational Information: (Please note: Operating time over 16 hours in a 24 hour period will re...
Total Hours of operation per 24 hr period 16
Starting time of operation (am/pm) 0600
Ending time of operation (am/pm) 2200
Maximum hourly production rate for project 400 TPH
Expected startup date 01/08/2024
Expected completion date 01/08/2025
What type of application is this for?
New Application
In accordance with the fee schedule approved by the Utah State Legislature, the Division of Air Q...
https://utahgov.co1.qualtrics.com/WRQualtricsControlPanel/File.php?F=F_1EiXwTCx3WTjBp8
Owner/Operator Representative:
https://utahgov.co1.qualtrics.com/WRQualtricsControlPanel/File.php?F=F_2b4JJBSzHX1cifn
12/24/24, 10:50 AM State of Utah Mail - Portable/Temporary Relocation Form
https://mail.google.com/mail/u/0/?ik=bffac613d3&view=pt&search=all&permthid=thread-f:1818885464937656073%7Cmsg-f:1818885464937656073&s…2/2
Susan Weisenberg <[e-mail]>
RE: Stansbury Park TRP generator size information
1 message
Bingham, Quin <[e-mail]>Thu, Dec 19, 2024 at 10:50 AM
To: Susan Weisenberg <[e-mail]>
Hi Susan,

Thanks for reaching out so quickly.

I have highlighted the diesel fuel engine size on the spec sheets (see attached).

Please let me know if you need additional information.

Best,
Quin

From: Susan Weisenberg <[e-mail]>
Sent: Thursday, December 19, 2024 9:47 AM
To: Bingham, Quin <[e-mail]>
Subject: Stansbury Park TRP generator size informaon

CAUTION: External Email: Be Cyber-Alert
Hello, I've received your electronic TRP for the Stansbury Park facility. Currently the DAQ management is requiring diesel
fueled engine size information even for track mounted equipment. Thanks

Susan Weisenberg,
Environmental Scientist
Office: 385-306-6512

12/24/24, 10:26 AM State of Utah Mail - RE: Stansbury Park TRP generator size information
https://mail.google.com/mail/u/0/?ik=bffac613d3&view=pt&search=all&permthid=thread-a:r6476002871590425610%7Cmsg-f:1818892029119152868&…1/2

McCloskey_MobilePLant.pdf
1168K
12/24/24, 10:26 AM State of Utah Mail - RE: Stansbury Park TRP generator size information
https://mail.google.com/mail/u/0/?ik=bffac613d3&view=pt&search=all&permthid=thread-a:r6476002871590425610%7Cmsg-f:1818892029119152868&…2/2
J50
JAW
CRUSHER
McCloskey International has a proven reputation for
designing quality, best-in-class equipment and the
J50 Crusher brings even more power and productivity
together in one machine. With its class-leading
throughput and capacity and the largest stockpile
height in its category the J50 crusher continues to
push the boundaries of industry performance.
√1270 (50”) x 735 (29”) single
toggle jaw
√Hydraulic CSS (Closed Side
Setting) Adjust
√Integrated hydraulic folding hopper
√Integrated hydraulic folding
stockpiling conveyors
√1200mm (48”) main conveyor
√Large gap between crusher
discharge and main conveyor
feedboot
√Open chassis design for ease of
maintenance
√Fast setup time
For more information, contact your dealer: mccloskeyinternational.com/dealer-map
FEATURES
©Copyright 2023 McCloskey International. All rights reserved. McCloskey is a trademark of McCloskey International. MCloskey International reservesthe right to make changes to the information and design of the machines on this brochure without reservation and notification to the users. Information
at time of print considered accurate — McCloskey International assumes no liability resulting from errors or omissions in this document.
McCloskey is a Registered Trademark of McCloskey International.
J50 TECH SPECS
Engine 280 kW (375 Hp)
Feed Opening 1270mm (50”) x
735mm (29”)
Grizzly Feeder
Width* 1164mm (45.8”)
Length 4450mm (175”)
Hopper Volume 6.3m3 (8.2yd3)
Stockpile Height
Main Conveyor 4250mm (13’ 11”)
Side Conveyor 2584mm (8’ 6”)
TRANSPORT
Height 3.40m (11’ 1.8”)
Length 14.48m (47’ 5.9”)
Width 2.5m (8’ 2.5”)
Weight - w/ magnet 59,000kg
& side conveyor (130,702 lb)
OPTIONS
Main Conveyor Variable Speed | 50mm
or 70mm Aperture Bofor | Hopper
Extensions | Overband Magnet | Water
Pump and Dust Suppression System |
Refueling Pump | Square Tooth Quarry
Jaws | 30mm Corrugated Jaws | 50 mm
Corrugated Jaws | Multi-tooth Dies |
Crusher Deflector Plate
*Inside wearplates
With 1270mm (50”) x 735mm (29”) single toggle jaw
(the widest jaw in its class), the J50 places McCloskey
International at the fore of portable crushing machinery.
Maximum productivity is delivered through the
enhancements to the jaw box including heavier flywheels
and optimization for all crushing applications. The J50’s
jaw speed leads to better reduction and material being
processed faster through the crushing chamber.
R155
DUAL POWER
SCREENER
One of the most versatile in the R Series screeners,
the R155 High Energy Screener is available in several
configurations including Dual Power, and is a tough,
robust screening tool designed to cope with the heaviest
of applications. The R155 Dual Power brings versatility
to any site, while reducing operational costs and CO2
emissions. With the ability to handle some of the worst,
untreated construction and demolition waste, the R155
can minimize material pre-handling and provide clean
end products.
√4.880m x 1.525m (16’x5’) heavy duty
high energy 2 bearing screenbox
√97 kW (127 Hp) Diesel Engine 37 kW
(50 Hp) Electric Motor
√Direct feed Hardox® lined hopper
√Travel out fixed walkways
√Integrated hydraulic folding
stockpiling conveyors
√Fast on site setup time – 10 minutes
√Screen raises at lower end for easy
bottom deck access
√Service standing room inside
Powerpack
√Track mobile
For more information, contact your dealer: mccloskeyinternational.com/dealer-map
FEATURES
DUAL POWER
©Copyright 2024 McCloskey International. All rights reserved. McCloskey is a trademark of McCloskey International. McCloskey International reservesthe right to make changes to the information and design of the machines on this brochure without reservation and notification to the users. Information
at time of print considered accurate — McCloskey International assumes no liability resulting from errors or omissions in this document.
McCloskey is a Registered Trademark of McCloskey International. Hardox is a registered trademark of SSAB Technology AB.
TECH SPECS
Engine
Diesel Electric or 130 Hp (97 kW)
Dual Power Hybrid
Stockpile Height
Tail Conveyor 3.75m (12’ 3”)
Fines Conveyor 3.96m (13’)
Mid Conveyor 3.60m (11’ 10”)
Screenbox
Top Deck 4.880m x 1.525m
(16’ x 5’)
Bottom Deck 4.575m x 1.525m
(15’ x 5’)
TRANSPORT
Transport Height 3.40m (11’ 2”)
Transport Length 15.3m (50’ 2”)
Transport Width 2.90m (9’ 6”)
Weight - Belt Feeder 32,700 Kgs
(72,091 lbs)
Weight - Apron Feeder 35,420 Kgs
(78,090 lbs)
OPTIONS
Heavy duty top deck finger screen |
Bottom deck finger screen | Top deck
punch plate | Bottom deck punch plate |
Top deck Bofor screen | Radio remote
control for tracks | Plate apron feeder |
365 SiteConnex Telematics
The R155 has proven to be extremely effective across
a wide range of applications. With a screening area of
155 ft² across the High Energy Screenbox – the largest
in its class – the R155 has impressed operators working
with difficult materials.
The R155 dual power screener incorproates both diesel
and electric power options, providing flexibility in selecting
the most appropriate power source for a given situation.
The ability to switch between diesel and electric power
reduces fuel consumption, lowers operating costs, and
minimizes environmental impact.
ST100
STACKER
The McCloskey® ST100 Wheeled Stacker is designed
for high capacity stockpiling operations. The unit comes
standard with diesel power units, hydraulic main lift and
hydraulic top fold. Electric and dual power are both
available as options based on the best application for the
customer’s business.
√900mm (36”) wide heavy duty 100’
long conveyor
√55kW (74Hp) Tier 4 engine
√Row towable
√Large feed hopper
√Hydraulic folding frame for easy
transport
√Fast on-site setup time (5 minutes)
√Abundant service room inside the
power-pack
√Air brakes, mud flaps, lights
For more information, contact your dealer: mccloskeyinternational.com/dealer-map
FEATURES
©Copyright 2023 McCloskey International. All rights reserved. McCloskey is a trademark of McCloskey International. MCloskey International reservesthe right to make changes to the information and design of the machines on this brochure without reservation and notification to the users. Information
at time of print considered accurate — McCloskey International assumes no liability resulting from errors or omissions in this document.
McCloskey is a Registered Trademark of McCloskey International.
ST100 TECH SPECS
Engine 55kW (74 Hp)
Belt Length 30.48m (100’)
Belt Width 900mm (36”)
Stockpile Height 12.2m (40’)
Stockpile Capacity 3350m3 (4375 yd3)
Production 500 TPH (standard)
800 TPH (optional)
TRANSPORT
Transport Length 22.41m (73’ 6.5”)
Transport Height 4.12m (13’ 6”)
Transport Width 3.33m (10’ 11”)
OPTIONS
Belt Scale | Spray Bar | Chevron Belt
| ASGCO Scraper | Under Hopper
Impact Idlers | Magnet Material
Separator | Paddle Wheel | V-Bin |
Hopper Extensions | Auxiliary Guarding
The ST100 is also available as a radio controlled track
mounted unit. This heavy duty mobile stacker has a setback
axle and 22.5 degree max conveyor angle allowing for the
highest stockpiles per conveyor length in the industry.
With its durable truss frame, large feed hopper and base
production capacity of 500 TPH with optional upgrades to 800
TPH, the McCloskey ST100 Stacker stands up well above the
competition.