HomeMy WebLinkAboutDDW-2024-009570 1
Annual Drinking Water Quality Report 2022
Wanship Mutual Water Company
We are pleased to present to you this year's Annual Drinking Water Quality Report. This report is
designed to inform you about the quality of the water and services we deliver to you every day.
Our constant goal is to provide you with a safe and dependable supply of drinking water. We want
you to understand the efforts we make to continually improve the water treatment process and
protect our water resources. We are committed to ensuring the quality of your water. Our water
sources have been determined to be from groundwater sources. Our water sources are Upper
Spring, Lower Spring, Well #2 (East), and Bridge Hollow Water Association UTAH22117.
The Drinking Water Source Protection Plan for Wanship Mutual Water Company is available for
your review. It contains information about source protection zones, potential contamination
sources and management strategies to protect our drinking water. Our sources have been
determined to have a low level of susceptibility from potential contamination from sources. We
have also developed management strategies to further protect our sources from contamination.
Please contact us if you have questions or concerns about our source protection plan.
There are many connections to our water distribution system. When connections are properly
installed and maintained, the concerns are very minimal. However, unapproved and improper
piping changes or connections can adversely affect not only the availability, but also the quality of
the water. A cross connection may let polluted water or even chemicals mingle into the water
supply system when not properly protected. This not only compromises the water quality but can
also affect your health. So, what can you do? Do not make or allow improper connections at your
homes. Even that unprotected garden hose lying in the puddle next to the driveway is a cross
connection. The unprotected lawn sprinkler system after you have fertilized or sprayed is also a
cross connection. When the cross connection is allowed to exist at your home, it will affect you
and your family first. If you’d like to learn more about helping to protect the quality of our water,
call us for further information about ways you can help.
This report shows our water quality and what it means to you, our customer.
If you have any questions about this report or concerning your water utility, please contact Wade
Homer at 801-231-1656. We want our valued customers to be informed about their water utility.
Wanship Mutual Water Company routinely monitors for constituents in our drinking water in
accordance with the Federal and Utah State laws. The following table shows the results of our
monitoring for the period of January 1st to December 31st, 2022. All drinking water, including
bottled drinking water, may be reasonably expected to contain at least small amounts of some
constituents. It's important to remember that the presence of these constituents does not necessarily
pose a health risk.
In the following table you will find many terms and abbreviations you might not be familiar with.
2
To help you better understand these terms we've provided the following definitions:
Non-Detects (ND) - laboratory analysis indicates that the constituent is not present.
ND/Low - High - For water systems that have multiple sources of water, the Utah Division of
Drinking Water has given water systems the option of listing the test results of the constituents in
one table, instead of multiple tables. To accomplish this, the lowest and highest values detected in
the multiple sources are recorded in the same space in the report table.
Parts per million (ppm) or Milligrams per liter (mg/l) - one part per million corresponds to one
minute in two years or a single penny in $10,000.
Parts per billion (ppb) or Micrograms per liter (ug/l) - one part per billion corresponds to one
minute in 2,000 years, or a single penny in $10,000,000.
Parts per trillion (ppt) or Nanograms per liter (nanograms/l) - one part per trillion corresponds
to one minute in 2,000,000 years, or a single penny in $10,000,000,000.
Parts per quadrillion (ppq) or Picograms per liter (picograms/l) - one part per quadrillion
corresponds to one minute in 2,000,000,000 years or one penny in $10,000,000,000,000.
Picocuries per liter (pCi/L) - picocuries per liter is a measure of the radioactivity in water.
Millirems per year (mrem/yr) - measure of radiation absorbed by the body.
Million Fibers per Liter (MFL) - million fibers per liter is a measure of the presence of asbestos
fibers that are longer than 10 micrometers.
Nephelometric Turbidity Unit (NTU) - nephelometric turbidity unit is a measure of the clarity of
water. Turbidity in excess of 5 NTU is just noticeable to the average person.
Action Level (AL) - the concentration of a contaminant which, if exceeded, triggers treatment or
other requirements which a water system must follow.
Treatment Technique (TT) - A treatment technique is a required process intended to reduce the
level of a contaminant in drinking water.
Maximum Contaminant Level (MCL) - The “Maximum Allowed” (MCL) is the highest level of
a contaminant that is allowed in drinking water. MCLs are set as close to the MCLGs as feasible
using the best available treatment technology.
Maximum Contaminant Level Goal (MCLG) - The “Goal”(MCLG) is the level of a contaminant
in drinking water below which there is no known or expected risk to health. MCLGs allow for a
margin of safety.
Maximum Residual Disinfectant Level (MRDL) - The highest level of a disinfectant allowed in
3
drinking water. There is convincing evidence that addition of a disinfectant is necessary for control
of microbial contaminants.
Maximum Residual Disinfectant Level Goal (MRDLG) - The level of a drinking water
disinfectant below which there is no known or expected risk to health. MRDLGs do not reflect the
benefits of the use of disinfectants to control microbial contaminants.
Date- Because of required sampling time frames i.e. yearly, 3 years, 4 years and 6 years, sampling
dates may seem outdated.
Waivers (W)- Because some chemicals are not used or stored in areas around drinking water
sources, some water systems have been given waivers that exempt them from having to take certain
chemical samples, these waivers are also tied to Drinking Water Source Protection Plans.
TEST RESULTS
Contaminant Violation
Y/N Level
Detected
ND/Low-
High
Unit
Measurement MCLG MCL Date
Sampled
Likely Source of
Contamination
Microbiological Contaminants
Total Coliform Bacteria N 1 N/A 0 Presence of
coliform bacteria
in 5% of monthly
samples
2022 Naturally present in the
environment
Fecal coliform and E.coli N 0 N/A 0 If a routine sample
and repeat sample
are total coliform
positive, and one is
also fecal coliform
or E. coli positive
2022
Human and animal fecal
waste
Turbidity
for Ground Water
Y 0.12-81.1 NTU N/A 5 2019,
2021,
2022
Soil runoff
Inorganic Contaminants
Arsenic N 0-2.4 ppb 0 10 2019,
2022
Erosion of natural deposits;
runoff from orchards; runoff
from glass and electronics
production wastes
Barium N 0.039-
0.554
ppm 2 2 2019,
2022
Discharge of drilling wastes;
discharge from metal
refineries; erosion of natural
deposits
Copper
a. 90% results
b. # of sites that exceed
the AL
N a. 0.218
b. 0
ppm 1.3 AL=1.3 2022 Erosion of natural deposits;
Leaching from wood
preservatives; Corrosion of
household plumbing systems
Cyanide N 0-8.6 ppb 200 200 2019,
2022
Discharge from steel/metal
factories; discharge from
plastic and fertilizer factories
4
Fluoride N 0-0.389 ppm 4 4 2019,
2022
Erosion of natural deposits;
water additive which
promotes strong teeth;
discharge from fertilizer and
aluminum factories
Lead
a. 90% results
b. # of sites that exceed
the AL
N a. 4.1
b. 0
ppb 0 AL=15 2022 Corrosion of household
plumbing systems, erosion of
natural deposits
Nitrate (as Nitrogen) N 0.47-1.963 ppm 10 10 2022 Runoff from fertilizer use;
leaching from septic tanks,
sewage; erosion of natural
deposits
Selenium N 1.1-1.3 ppb 50 50 2019,
2022
Discharge from petroleum
and metal refineries; erosion
of natural deposits; discharge
from mines
Sodium N 16.931-
272.726
ppm 500 None set by EPA 2019,
2022
Erosion of natural deposits;
discharge from refineries and
factories; runoff from
landfills.
Sulfate N 10.574-
124.491
ppm 1000 1000 2019,
2022
Erosion of natural deposits;
discharge from refineries and
factories; runoff from
landfills, runoff from
cropland
TDS (Total Dissolved
solids)
N 376-1844 ppm 2000 2000 2019,
2022
Erosion of natural deposits
If TDS is greater than 1000 ppm the supplier shall demonstrate to the Utah Drinking Water Board that no better water is available. The Board shall not
allow the use of an inferior source of water if a better source is available.
Disinfection By-products
TTHM [Total
trihalomethanes]
N 11.3 ppb 0 80 2020 By-product of drinking water
disinfection
Haloacetic Acids N 3.6 ppb 0 60 2020 By-product of drinking water
disinfection
Radioactive Contaminants
Alpha emitters N 0-4.7 pCi/1 0 15 2019,
2022
Erosion of natural deposits
Radium 228 N 0.19-2.1 pCi/1 0 5 2019,
2022
Erosion of natural deposits
Volatile Organic Contaminants
Toluene N 0-0.002 ppm 1 1 2021,
2022
Discharge from petroleum
factories
Microbiological Contaminants:
Total Coliform. Coliforms are bacteria that are naturally present in the environment and are used
as an indicator that other, potentially-harmful, bacteria may be present. Coliforms were found in
more samples than allowed and this was a warning of potential problems.
Turbidity. Turbidity has no health effects. However, turbidity can interfere with disinfection and
provide a medium for microbial growth. Turbidity may indicate the presence of disease-causing
organisms. These organisms include bacteria, viruses, and parasites that can cause symptoms such
as nausea, cramps, diarrhea, and associated headaches.
5
If present, elevated levels of lead can cause serious health problems, especially for pregnant
women and young children. Lead in drinking water is primarily from materials and components
associated with service lines and home plumbing. Wanship Mutual Water Company is responsible
for providing high quality drinking water but cannot control the variety of materials used in
plumbing components. When your water has been sitting for several hours, you can minimize the
potential for lead exposure by flushing your tap for 30 seconds to 2 minutes before using water for
drinking or cooking. If you are concerned about lead in your water, you may wish to have your
water tested. Information on lead in drinking water, testing methods, and steps you can take to
minimize exposure is available from the safe Drinking Water Hotline or at
http://www.epa.gov/safewater/lead.
Water samples taken in October 2022 confirmed the presence of total coliform bacteria. Total
coliforms are common in the environment and are generally not harmful themselves. The presence
of these bacteria is usually a result of a problem with water treatment or the pipes which distribute
the water and indicates that the water may have been contaminated with organisms that can cause
disease. Symptoms may include diarrhea, cramps, nausea, and possible jaundice, and any
associated headaches and fatigue. When the monthly samples confirmed the presence of total
coliform bacteria, we took steps to identify and correct the problem. Subsequent monthly sampling
has confirmed the absence of total coliforms in the water system.
We periodically monitor for a chlorine residual in the distribution system to meet all regulatory
requirements. In the fourth quarter of 2022, we failed to take the required samples. Testing for a
chlorine residual is used to ensure that the public is provided with safe drinking water. This
violation does not necessarily pose a health risk. We have reviewed why we failed to take the
required samples and will take steps to ensure that it will not happen again.
All sources of drinking water are subject to potential contamination by constituents that are
naturally occurring or manmade. Those constituents can be microbes, organic or inorganic
chemicals, or radioactive materials. All drinking water, including bottled water, may reasonably
be expected to contain at least small amounts of some contaminants. The presence of contaminants
does not necessarily indicate that the water poses a health risk. More information about
contaminants and potential health effects can be obtained by calling the Environmental Protection
Agency’s Safe Drinking Water Hotline at 1-800-426-4791.
MCLs are set at very stringent levels. To understand the possible health effects described for many
regulated constituents, a person would have to drink 2 liters of water every day at the MCL level
for a lifetime to have a one-in-a-million chance of having the described health effect.
Total Coliform: The Total Coliform Rule requires water systems to meet a stricter limit for
coliform bacteria. Coliform bacteria are usually harmless, but their presence in water can be an
indication of disease-causing bacteria. When coliform bacteria are found, special follow-up tests
are done to determine if harmful bacteria are present in the water supply. If this limit is exceeded,
the water supplier must notify the public by newspaper, television or radio. To comply with the
stricter regulation, we have increased the average amount of chlorine in the distribution system.
Nitrates: As a precaution we always notify physicians and health care providers in this area if
there is ever a higher than normal level of nitrates in the water supply.
6
Some people may be more vulnerable to contaminants in drinking water than the general
population. Immunocompromised persons such as persons with cancer undergoing chemotherapy,
persons who have undergone organ transplants, people with HIV/AIDS or other immune system
disorders, some elderly, and infants can be particularly at risk from infections. These people should
seek advice from their health care providers about drinking water. EPA/CDC guidelines on
appropriate means to lessen the risk of infection by cryptosporidium and other microbiological
contaminants are available from the Safe Drinking Water Hotline (800-426-4791).
We at Wanship Mutual Water Company work around the clock to provide top quality water to
every tap. We ask that all our customers help us protect our water sources, which are the heart of
our community, our way of life and our children’s future.
7
Wanship Mutual Water Company
PO Box 612
Coalville, UT 84017
May 7, 2024
Brandi Smith
CCR Compliance
Division of Drinking Water
P.O. Box 144830
Salt Lake City, Utah 84114-4830
Dear Ms. Smith:
Subject: Consumer Confidence Report for Wanship Mutual Water Company #22017.
Enclosed is a copy of the Wanship Mutual Water Company Consumer Confidence Report. It
contains the water quality information for our water system for the calendar year 2022 or the most
recent sample data.
We have delivered this report to our customers by allowing inspection of the report at the water
system office and mailing a copy upon request.
If you have any questions, please contact me at 801-231-1656.
Sincerely,
Wade Homer
Wanship Mutual Water Company