DSHW-2011-001325 - 0901a068801f79db

JAH 1 9 2011
January 14, 2011 UIAH DiVlSlUW Uf'
820~0-FY-059 SOUD & HAZARDOUS WASTt
Scott T. Anderson ^^li 00 1^0
Executive Secretary
Utah Department ofEnvironmental Quality
Division of Solid and Hazardous Waste
P.O. Box 144880
Salt Lake City, Utah 84114-4880
Re: ATK Launch Systems Inc. - Bacchus Facility, UTDOO1705029
Hazardous Waste Storage Permit Module II.D.5.C Submission
ATK Launch Systems Inc, Bacchus Facility-NIROP, UTS 170027277
Hazardous Waste Storage Permit Module II D.5.c Submission
J/^TK Launch Systems Inc. - Promontory Facility, UTD009081357
Hazardous Waste Storage Permit Module II.D.6.C Submission
Dear Mr. Anderson:
ATK Launch Systems has an annual requirement to update the parameters, analytical
methods and sample preparation methods listed in the reference documents. Two changes
are proposed, and they they are identified using trai:k changes on the attached document Please
direct any questions about this submission to George Gooch at [phone].
/ certify under penalty of law that this document and all attachments were prepared under my
direction or supervision in accordance with a system designed to assure that qualified personnel
properly gather and evaluate the information submitted. Based on my inquiry of the person or
persons who manage the system, or those persons directly responsible for gathering the
information, the information is, to the best of my knowledge and belief, true, accurate, and
complete. I am aware that there are significant penalties for submitting false information,
including the possibility offme and imprisonment for knowing violations.
Sincerely,
•4-
David P. Gosen, P.E. \j
Director, Environmental Services
C: J. Vandel
Z. Hao
Figure 3-4
Analytical Methods for Metals
Parameter Analytical Method Preparation Method '
Arsenic EPA 60IOC EPA 3005A (W) & 3050B (S)
Barium EPA 60IOC EPA 3005A (W) & 3050B (S)
Beryllium EPA 60IOC EPA 3005A (W) & 3050B (S)
Boron EPA 60IOC EPA 3005A (W) & 3050B (S)
Cadmium EPA 60IOC EPA 3005A (W) & 3050B (S)
Chromium EPA 60IOC EPA 3005A (W) & 3050B (S)
Copper EPA 60IOC EPA 3005A (W) & 3050B (S)
Lead EPA 60IOC EPA 3005A (W) & 3050B (S)
Manganese EPA 60IOC EPA 3005A (W) & 3050B (S)
Mercury EPA 7470A(W)& 7471B(S) EPA 7470A (W) & 747IB (S)
Molybdenum EPA 60IOC EPA 3005A (W) & 3050B (S)
Nickel EPA 60IOC EPA 3005A (W) & 3050B (S)
Selenium EPA 60IOC EPA 3005A (W) & 3050B (S)
Silver EPA6010C EPA 3005A (W) & 3050B (S)
Thallium EPA 60IOC EPA 3005A (W) & 3050B (S)
Vanadium EPA 60IOC EPA 3005A (W) & 3050B (S)
Zinc EPA 60IOC EPA 3005A (W) & 3050B (S)
Analytical Methods for Organics
Parameter Analytical Method Preparation Method
Volatle Organics EPA 8260B EPA 5030BC (W) & 5035A (S)
Semivolatile Organics EPA 8270D EPA 35 IOC (W)& 3550C (S)
TPH EPA SOISGD EPA 35 IOC (W)& 3550C (S)
TOC EPA 9060A (W only) EPA 9060A (W only)
Oil & Grease EPA 1664A(Wonly) EPA 1664A (W only)
Miscellaneous Test Methods
Parameter Analytical Method Preparation Method
pH EPA 9040C (W) & 9045D (S) EPA 9040C (W) & 9045D (S)
Ignitability EPA 1010A(W only) EPA 1010A(W only)
Toxicity EPA 6010C/7470A (Metais/Hg)
EPA 8260B (Volatile Organics)
EPA 8270D (Semivolatile Organics)
EPA 1311 Followed by 301 OA/7470A'
EPA 1311 Followed by 5030BC
EPA 1311 Followed by 35IOC
Explosives EPA 8330A EPA 8330A
Perchlorate EPA 314.0 EPA 314.0
Anions EPA 9056A EPA 9056A (W) & 5050 (S)
TSS SM 2540D SM2540D
TS SM 2540B SM 2540B
2.
The 'W indicates a water matrix. Samples that are water soluble liquids (or aqueous phase) fit into this
category. Non-aqueous liquids are usually treated as solids depending on the test method. In the case of an
oil matrix that cannot be analyzed by the solid preparation method, a waste dilution is often performed.
The 'S" indicates a solid matrix.
Mercury will be prepared using Method 7470A.