HomeMy WebLinkAboutDAQ-2024-007763
195 North 1950 West • Salt Lake City, UT
Mailing Address: P.O. Box 144820 • Salt Lake City, UT 84114-4820
Telephone (801) 536-4000 • Fax (801) 536-4099 • T.D.D. (801) 903-3978
www.deq.utah.gov
Printed on 100% recycled paper
State of Utah
Department of
Environmental Quality
Kimberly D. Shelley
Executive Director
DIVISION OF AIR QUALITY
Bryce C. Bird
Director
SPENCER J. COX
Governor
DEIDRE HENDERSON
Lieutenant Governor
DAQC-396-24
Site ID 14068 (B1)
Sam Cusick
CMC Rock
151 East 1750 North
Vineyard, UT 84059
Dear Mr. Cusick:
Re: CMC Rock – Temporary Relocation/Operation, Notice of Intent – Utah County
Your Notice of Intent dated April 23, 2024, to relocate portable aggregate equipment to the
temporary project located north of Cedar Fort on West Canyon Road, UT, was received by the
Utah Division of Air Quality (DAQ) and has been reviewed.
The following equipment has been approved for operation for this temporary project:
Astec jaw crusher
Astec cone crusher
JCI screen
Cat Xq800 725 kW 2019 gen set
The above equipment has been permitted for operation in the State of Utah by the Goodfellow
Corporation portable Approval Order (AO) DAQE-AN140680003-18 dated April 18, 2018.
Approval is granted to relocate and operate this equipment at the new location for a period not to
exceed 180 operational days. As per Utah Administrative Code (UAC) R307-401-17, the
operation of equipment at this temporary site may be for up to 180 working days in any calendar
year not to exceed 365 consecutive days, starting from the initial relocation date. Approval is
subject to the dust control plan submitted for this location and the conditions of the above
referenced AO. The startup time for the operation of this equipment shall be from 6:00 am to
10 pm as per Condition II.B.3.c of the referenced AO. The hours of operation shall be 16 hours a
day. The maximum production rate shall be held to the requested 400 tons per hour.
6 Û Û Ù Û Ý
DAQC-396-24
Page 2
Emissions for this project have been estimated at the following:
Pollutant gram/sec lbs/hr lbs/24 hr tons/yr
PM10 1.64 13.00 129.97 10.14
SOx 0.63 4.99 49.88 3.89
NOx 4.20 33.33 333.34 26.00
CO 1.11 8.84 88.40 6.90
VOC 0.18 1.39 13.91 1.08
The owner/operator shall maintain records of the actual operation hours, days, and production
rate, of the above referenced equipment at this relocation site and have the ability to submit the
information to the DAQ upon the request of representatives of the Director. Please make certain
that the plant operator is aware of all the location specific requirements for this site and the
conditions of the aforementioned AO.
Federal New Source Performance Standards Subpart OOO requires that initial Method 9
observations be performed for all applicable portable crushers, screens, and attached conveyors.
Subpart OOO also mandates that all crushers constructed, modified, or reconstructed on or after
April 22, 2008, which are not enclosed, must install spray bars on the equipment and keep
maintenance records to ensure proper spray bar operations.
Utah Division of Water Quality Storm Water Permits and regulations may apply to this temporary
project. Please refer to Utah DEQ Water Quality’s current Storm Water construction requirements
for additional information.
This approval for relocation in no way releases the owner or operator from any liability for
compliance with all other applicable federal, state, and local regulations including the UAC.
If you have any questions regarding this relocation authorization or the temporary relocation
process please contact Susan Weisenberg at (385) 306-6512.
Sincerely,
Jay P. Morris
Assistant Director
JPM:SPW:jl
Enclosure: Submitted Temporary Relocation Form
cc: Utah County Health Department
4 * - - $ . — 4 @ v A ? A C @ C w A D ˜
Susan Weisenberg <sweisenberg@utah.gov>
Portable/Temporary Relocation Form
1 message
noreply@qemailserver.com <noreply@qemailserver.com>Tue, Apr 23, 2024 at 9:32 AM
Reply-To: trigger@qemailserver.com
To: sweisenberg@utah.gov
Susan/Chad:
Site # -- CMC ROck has requested a Temporary Relocation. Please see the information below. Any attachments can be access
by clicking on the links.
Recipient Data:
Time Finished: 2024-04-23 09:32:43 MDT
IP: 50.73.36.153
ResponseID: R_3wHvDorbRXCLJhK
Link to View Results: Click Here
URL to View Results: https://utahgov.iad1.qualtrics.com/apps/single-response-reports/reports/
iJi4tQBzITBeO0RLrpBPTEXRcKmnnKQswsrrMKq2LWAKBBEFnb0SaQ0zNqKRbeGwY0WmE%
2ExNwb6bvCKf35Z8sgNTPY44bbTqgrzimCbH21cS6vs3qTLbN1P-7uSaYvrrYP1NjNRTRhBfHb9F-yMvMiXEtHcAxe-
OAbFeob9oYcEBAJrs01bu4R9M-3F-LfyxS%2EZkub9Z6LAbixiH8DP3xbEA-f2V0bqTjxC5H5Era7dMhziDgLn2-
2zUnRm9gZPYOYYEPfDb8qPQKPJ6ru4MW4ekx9LuTeV0hHZXzdlTNcwP4z-v5Ef9NULr2m2BGJbhC3BVjhV7pfa8Rqns-oPLHg
Response Summary:
Please fill out the information below:
Contact Person: Sam Cusick
Company Name: CMC ROck
Mailing Address: 151 E 1750 N
City: Vineyard
Zip: 84059
Phone Number: 8013689011
Email: samc@cmcrock.com
Is the site located within a PM2.5 non-attainment and maintenance plan areas on cleared land grea...
No
All temporary relocation projects are required to submit a Fugitive Dust Control Plan (FDCP). Lo...
CC071BBB3E
Briefly give directions to the site and/or physical address:
North of cedar fort on W canyon RD
Proposed Relocation Information:
Closest City Cedar Fort
County Utah
UTM X Coordinates 407702.11 E
UTM Y Coordinates 4469030.66
Approximate distance to the nearest house/business 1 Mile
UTM X Coordinates to nearest house/business 408391.13 E
UTM Y Coordinates to nearest house/business 4468321.24 N
Does this site currently have a permit with DAQ?
No
Please provide the permit ID for the equipment? (DAQE-XXXXXXXXX-XX)
DAQE-AN140680003-18
4/26/24, 8:06 PM State of Utah Mail - Portable/Temporary Relocation Form
https://mail.google.com/mail/u/0/?ik=bffac613d3&view=pt&search=all&permthid=thread-f:1797140114966552352%7Cmsg-f:1797140114966552352&…1/2
Please list all the Equipment on Site:Note: It is important to identify ALL diesel powered engine...
1
Equipment Type Jaw
Make/Model Astec
Serial or ID# 420086
Manufactured Date 2022
Design Capacity 400
2
Equipment Type Cone
Make/Model Astec
Serial or ID# c221656
Manufactured Date 2022
Design Capacity 400
3
Equipment Type GenSet
Make/Model Cat
Serial or ID# Xq800
Manufactured Date 2019
Design Capacity 800
4
Equipment Type Screen
Make/Model JCI
Serial or ID# s205126
Manufactured Date 2020
Design Capacity 400
Please attach a site diagram showing the equipment layout and general site dimensions for this re...
https://utahgov.co1.qualtrics.com/WRQualtricsControlPanel/File.php?F=F_1GNYOSrHZDPARqM
Have any other state or local regulatory agencies issued any other "Conditional Use Permits" for...
No
Operational Information: (Please note: Operating time over 16 hours in a 24 hour period will re...
Total Hours of operation per 24 hr period 16
Starting time of operation (am/pm) 4
Ending time of operation (am/pm) 8
Maximum hourly production rate for project 400
Expected startup date 05/01/2024
Expected completion date 05/01/2023
What type of application is this for?
New Application
In accordance with the fee schedule approved by the Utah State Legislature, the Division of Air Q...
https://utahgov.co1.qualtrics.com/WRQualtricsControlPanel/File.php?F=F_21aEmINjs6pFNk7
Owner/Operator Representative:
https://utahgov.co1.qualtrics.com/WRQualtricsControlPanel/File.php?F=F_1pYEqXXap85KWZe
4/26/24, 8:06 PM State of Utah Mail - Portable/Temporary Relocation Form
https://mail.google.com/mail/u/0/?ik=bffac613d3&view=pt&search=all&permthid=thread-f:1797140114966552352%7Cmsg-f:1797140114966552352&…2/2
Susan Weisenberg <sweisenberg@utah.gov>
Re: starting hours of operation limit
1 message
Sam Cusick <samc@cmcrock.com>Mon, Apr 29, 2024 at 4:30 PM
To: Susan Weisenberg <sweisenberg@utah.gov>
Cc: Chad Gilgen <cgilgen@utah.gov>
Hey Susan,
That would be acceptable.
Sam Cusick
CMC Operations
c: (801) 368-9011
e: samc@cmcrock.com
On Apr 29, 2024, at 4:27 PM, Susan Weisenberg <sweisenberg@utah.gov> wrote:
Hello, with regards to your requested Temporary relocation to Cedar Fort, I was just reminded by my management
that your current portable Approval Order restricts the startup time of equipment operation as per Condition II.B.3.c
to 6am. Is the starting time of 6:00 a.m. acceptable for this project or would you like to make a formal request to
change the startup hour? Thanks
Susan Weisenberg,
Environmental Scientist
Office: 385-306-6512
5/1/24, 11:36 AM State of Utah Mail - Re: starting hours of operation limit
https://mail.google.com/mail/u/0/?ik=bffac613d3&view=pt&search=all&permthid=thread-a:r-9117394141322026608%7Cmsg-f:1797709997089489253…1/1